Question about Microsoft Xbox 360 Console

1 Answer

Av inputs not working

No matter how i hook up the cables i cannot get the av to work, i know the system is still working because i can still turn the system on and off useing the controller. and there are no red lights on, just the center green one in the power button on the console. any help would be awesome.

Posted by on

  • 3 more comments 
  • palmerc82 Oct 30, 2008

    i have sound but no video

  • peterjamie Oct 30, 2008

    i got that problem aswell it sucks i got no video but i got sound i payed alot of money for it and its !!!!****!!!!

  • Anonymous Dec 28, 2008

    I GOT THE SAME PROBLEM HOW DO I FIX IT

  • Anonymous Jan 27, 2009

    I have the same problem. Everything works as it is supposed to except for the damn audio and video

  • Game Zone May 11, 2010

    Audio Visual (AV) cable not working? Do you have any sound? Cable may need to be replaced. Only cost $10-20.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 69 Answers

You will ned to send the console back for a repair, this is a common problem and I have had it too... its a problem with the mainboard and you dont get any red lights with this one.
If the console is less than 3 years old it will still be in warranty.
Dont waste your time buying another cable as I did the same and didnt make any difference.

Posted on Oct 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Playstation 3 works fine useing the av hook up but won;t work with hdmi cable hook up.


First, make sure your TV is on the appropriate input for the plugged in HDMI cable. Once this is completed, turn your ps3 on. If the screen comes on and is black, turn the ps3 to standby (red light is on) and hold the front power button until the console beeps a second time. This will usually force the ps3 to recognize the hdmi input and will bring up the menu to configure the AV settings.

Aug 13, 2014 | Sony Playstation 3 (PS3) Console

1 Answer

My wii when i turn it on it only has lines going across the screen.. about a week back it was saying something about the memory. now it wont load the wii menu nor will it load any games... if anyone knows...


Picture Is Black and White or Does Not Appear
Situation:

The console powers on and shows a black and white image on the television screen
The console powers on and there is no image on the television
 

What to do:

Determine whether the Standard AV Cables (packaged with the system) or the Component Cables (sold separately) are being used.
AV Cables
Ensure the yellow, red, and white cables are connected to the correct corresponding inputs on the TV. (How To)
Try another set of inputs on the TV, or hooking the Wii console up to another TV.
If the TV does not have the yellow, red and white inputs, it will most likely have component inputs which allow standard AV cable use. Try these AV hookup steps. (How To)
Component Cables
Ensure the red, blue and green video cables are connected to the correct corresponding inputs on the TV. (How To)
Try another set of inputs on the TV, or hooking the Wii console up to another TV.
 

Still Not Resolved:

If the television is continues to show a black and white image when powering on the Wii console, then the problem is likely with the system and it will need to be repaired. Please call 1-800-255-3700 so that we may assist you further.
 

 
Was this information helpful?

Nov 02, 2012 | Nintendo Wii Console

1 Answer

Why cant i get my wii console to work in color


Well it might either be the tv or the av cables that is causing the wii system to be in black grey and white then.
Picture Is Black and White or Does Not Appear Situation:
  • The console powers on and shows a black and white image on the television screen
  • The console powers on and there is no image on the television


What to do:
  • Determine whether the Standard AV Cables (packaged with the system) or the Component Cables (sold separately) are being used.

  • AV Cables

    • Ensure the yellow, red, and white cables are connected to the correct corresponding inputs on the TV. (How To)

    • Try another set of inputs on the TV, or hooking the Wii console up to another TV.

    • If the TV does not have the yellow, red and white inputs, it will most likely have component inputs which allow standard AV cable use. Try these AV hookup steps. (How To)

  • Component Cables

    • Ensure the red, blue and green video cables are connected to the correct corresponding inputs on the TV. (How To)

    • Try another set of inputs on the TV, or hooking the Wii console up to another TV.


Still Not Resolved:
  • If the television is continues to show a black and white image when powering on the Wii console, then the problem is likely with the system and it will need to be repaired. Please call 1-800-255-3700 so that we may assist you further.


Mar 06, 2012 | Nintendo Wii Console

1 Answer

Hooked up hd cable to ps3 and tv, now have no sound


Be sure to check the cables. You may need to replace them.

Try the cables with another component, if possible.

Also, try using AV cables to verify that it is not the TV and to simply troubleshoot:

To get back to default AV settings:

Press and hold the power button until the systems shuts off. (wait 2 seconds)

Press and hold the power button again until it shuts off again.


Once you have verified that AV is working, turn off console, take out AV cables.


Plug in HDMI cable and turn system back on. Switch TV input to HDMI and it will ask you if you would like to use the HDMI cables, select yes again and verify.


If you cannot get sound, again, check the cables..


If new cables do not work, then your HDMI output is going bad, not from use rather normal wear and tear of the motherboard.


To get the best non HD picture, you will need to get some 'component' cables, rather than the standard AV (red, white, yellow).


Good luck

Jan 27, 2011 | Sony Playstation 3 (PS3) Console

2 Answers

Trying to hook up an emerson dvd player to tv and its not working? older tv it has no cable hook up or control box for channel set up, shouldnt the dvd player still be able to work though?


IM GUESSING THIS MIGHT BE AN RCA TELEVISION? if you dont have an rca in hook up on the tv give up and buy a new tv or you can find an older item what it is is a switch that has an rca input and a coax output it was used to hook up the older video game systems it is still sold in most stores and that will work if you do have rca inputs and lost the remote you need to get a universal remote to switch the input on certain older rca tv's you could go to channel 00 and it would set it to the input with the switch you shoudl be able to use it by putting the tv on channel 3

Feb 28, 2010 | Emerson EWD7001 DVD Player

2 Answers

Dynex tv works. bought ps3. when hooked up to


I would suggest you check if your PS3 is set up on going through the HDMI Cable.On your PS3's XMB scroll to settings -> Display Settings -> ANd from there go down to the one that says "Y Pb/Cb Pr/Cr Super-White (HDMI)" and hit X and select the option Yes... That sets the PS3 displaying through the HDMI
If you are already have done that I'm pretty sure you know you have to change the Input on your TV to HDMI... Take your remote and hit Input -> Scroll down to HDMI on the Input Source menu and hit Enter when you get to HDMI
If the AV on your PS3 works and not your HDMI sounds like Display Settings issue...
If you have done all that, that is strange if it still doesn't work.
There are some people that are having problems with the AV Cable with the PS3, I tried this and it really does work. I switched from HDMI on one tv to a AV Cable on another and when I did that neither TV would display content from my tv. The fix for this is resetting your PS3, like on a iDevice you hold the home button and lock button, for the PS3 you hold the Power off button and the Eject button for around 10 seconds. This resets your PS3 into default video settings. Until it Turns on, Beeps, and Turns off. This should work.

Jan 01, 2010 | Televison & Video

1 Answer

Unuseable signal


WHAT HAPPENS WHEN YOU USE A DVD INPUT (AV) OR A SAT/CABLE BOX CONNECTED TO THE AV INPUT'S ,,IF IT CLEARS UP YOU HAVE A SIGNAL BOARD BAD BUUUUUUT YOU CAN BYPASS THAT BOARD AND SAVE MONEY JUST BY USING THE AV INPUT...TUNICA

Sep 25, 2008 | RCA P52926 52" Rear Projection Television

2 Answers

Audio Videio Cable


In QuickPlay, AV input is under media (the Icon that shows headphones, movie reel, and photos), not under TV (Icon of monitor). Why they put it there, I have no idea, but that's where I found it. BTW, I'm running QuickPlay 3.7 v.6112

Jun 25, 2008 | HP Expresscard TV Tuner For Windows Vista...

1 Answer

How Do I Hook This Thing Up?!?


See what audio outputs your tv has. See if your HTS has matching inputs. If it does connect them with the proper cable(s). Connecting to the tv should cause your HTS to work with anything you are watching on the tv.

May 15, 2008 | Durabrand STS92 System

1 Answer

Nintendo 64 HDTV


I am not an HDTV expert but I believe they are all backwards compatible so the fact it is HD should not be a problem. Have you tried a vcr or dvd player on the same hook ups? It is possible you are trying to use a video input that is already in use? I know on my TV I have the DVD hooked up with an S-video cable to "Video 2". Right next to the S-video hookup are the red, yellow, white RCA jacks. On my TV these can't be used when the S-video is in use so I have to have the games hooked up to the front panel "Video 3". I would disconnect everything and try hooking the N64 up in each input to see if you can find one that works.

Mar 02, 2008 | Nintendo 64 Console

Not finding what you are looking for?
Microsoft Xbox 360 Console Logo

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Video Game Consoles & Games Experts

marley mcelhinney

Level 3 Expert

490 Answers

Tre Elkins

Level 3 Expert

643 Answers

Mike Neath
Mike Neath

Level 3 Expert

315 Answers

Are you a Microsoft Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...