Question about Linksys BEFW11S4 802.11b Wireless Router/Switch + WMP11 PCI Card (BEFW11S4 + WMP11)

1 Answer

Changing IP address on computer with router linksy802.11b

Please tell me how I change the IP address. I have a router by Linksys 802.11b.

Posted by on

  • Roseya28 Oct 07, 2008

    My router ip is 192.168.1.1 so I did not try. Does this matter?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,913 Answers

Access your router with ip.
open internet explorer if your defualt router ip is :192.168.0.1 type this http://192.168.0.1 in addres bar in IE. then neter username admin and password aslo admin
if not accepr blnk user name and passowrd is admin.

then go to ssytem then set ip and follow the procedure.

Posted on Oct 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Linksys sd208 reset


The reset button is usually at the back of the router. If you are unable to locate it you can reset it using a web based set-up page. Make sure you connect your router to a PC using wired connection and perform the following steps:
Step 1:
Launch a web browser like Internet Explorer.
Step 2:
In the Address bar, enter "192.168.1.1" as the router's default IP address then press [Enter]. If this doesn't work or if the IP address of your router has been changed, enter it instead.
Step 3:
Enter "admin" in the Password field then leave the User name blank. If you have set up a User name and Password for your Linksys router before, enter your personalized credentials instead.
QUICK TIP: For Linksys Smart Wi-Fi Routers, you can enter "http://myrouter.local" on the Address bar to access its web-based setup page.
The router's web-based setup page should now appear from here you can reset the router.

for more info browse this link: http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=3676

Sep 19, 2013 | Networking Hubs & Switches

1 Answer

How do i connect two computers so they both have the same ip address i have a linksys 5-port workgroup switch will that work ? also i had hooked it up but only one of my computers had internet


They cannot have the same IP address due to the mechanics of DHCP. Buying a cheap 50$ router (not switch) will fix your problem as your internet service provider will see that device as a single unit that it will assign an IP and then the router will give out internal ip addresses so that they can get online. The switch does not have this functionality.

Feb 16, 2011 | Linksys EZXS55W EtherFast 10/100 5-Port...

1 Answer

Linksys NH1005 V2.2 Ethernet 10/100 5 Port Hub Router. I cant get the other computers connected to the hub to connect to the internet. I've tried everything.


Hello!

I will just illustrate on how to configure or to set the correct IP addressing;

Assuming that we will manually put IP address on each computer:

PC1:

IP Address: 192.168.1.13
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1

Preffered DNS server: 192.168.1.1

***note that 192.168.1.1 is the IP Address that your ISP gives to you, so on the other computer (see below)


PC2:

IP Address: 192.168.1.18
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1

Preffered DNS server: 192.168.1.1

Hope I was able to help.

Oct 09, 2010 | Linksys (NH1005) 5x10/100 Mbps Networking...

1 Answer

I have a 802.b I can brouse the enternet with a cable but not with a wireless laptop the laptop is a dell with a wireless card and the router see's the laptop and gives it an IP address and the laptop...


As your router and laptop can see each other it is not a connection issue and you’re your SSID is correct. More than likely that WEP/WPA or pass phrase are the same on both router and all wireless devices.

Jun 30, 2010 | Linksys BEFW11S4 802.11b Wireless...

1 Answer

Unable to get IP address


The D-link DSS switch should require nothing special to pass along IP addresses. You may want to power off your computer, switch and router, and then power up after 30 seconds. It could be that when you were testing, the computer pulled an IP address from the router and if you moved to the switch without renewing the IP, there was a conflict. Powering down and repowering should do the trick.

Apr 13, 2010 | D-Link DSS-16+ (dsdldss16p) 16x10/100 Mbps...

1 Answer

How do you connect a Linksys NH1005 v2 hub and whats the difference between a hub and a router?


A router takes an Internet connection, routes it to several other computers and provides each of these computers with their own IP address.

A Hub, on the other hand, will split the Internet, but the various ports on the hub will all have a single IP address. Makes it hard to use a computer for much of anything, if it is the second computer, you'll have trouble getting access.

Nov 13, 2009 | Linksys (NH1005) 5x10/100 Mbps Networking...

1 Answer

Cant find IP address


You need to make sure that DHCP is turned on for the router and the the Xbox is set to automaticallly get network settings. If not, then you will need to manually configure the adress and settings. If this is the case, please post back the address of the router and all other devices on your network and we can help you make a suitable choice and get it configured.

Aug 15, 2009 | Linksys (NH1005) 5x10/100 Mbps Networking...

1 Answer

Cannot share my cable modem connection


You need to connect a router to the cable modem.  The router then gets an IP address from Comcast and provides a gateway between the computers connected to the router.
The modem expects to communicate with a single Ethernet device, and provides an IP address to the first device that provides a piece of data called a MAC address.  By placing a router in-between, the router gets the IP address that lets you communicate on the Internet.  It provides local IP addresses to the equipment connected to the local Ethernet and "routes" those to the Internet.  You can either hook your two devices into the router if it has enough ports, or hook you switch to the router and hook your PC and PS3 into the switch.

May 05, 2009 | Linksys EtherFast EZXS16W 16-Port Ethernet...

1 Answer

How to reset settings of linksys srw2008p 8 port switch.


hmm.. router? try to check the router if it has an reset switch then press it with in 5-10 seconds...

Feb 04, 2009 | Linksys SRW2008P 8-Port Gigabit Ethernet...

1 Answer

Linksys 5-port switch model ezxs55w


Is this the DSL router that comes from the ISP or is this one that you purchased for this purpose?

The problem would seem to be that you are probably only getting one IP address. If this router is from the ISP then you are probably only getting one IP address. If this the case you will need to either request another router that has the ability to act as a DHCP server. If this is not an option, then my solution would be to get another router/switch that will provide IP addressing. This would solve your problem.

However, with not knowing whether you are getting ip addresses on both computers this is just my best guess based on the information provided.

Hope this helps.

Jan 29, 2009 | Networking Hubs & Switches

Not finding what you are looking for?
Linksys BEFW11S4 802.11b Wireless Router/Switch + WMP11 PCI Card (BEFW11S4 + WMP11) Logo

Related Topics:

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Networking Hubs & Switches Experts

Coss

Level 3 Expert

1039 Answers

Mike

Level 3 Expert

4331 Answers

NIK
NIK

Level 2 Expert

206 Answers

Are you a Linksys Networking Hub and Switch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...