Question about Televison & Video

Open Question

When my LG 32LT7 TV is recording a programme, I can't stop the recording, switch channels, or even turn off the TV ( I have to pull the plug out). The hard drive seems to seize up. Any ideas?

Posted by on

  • Anonymous Oct 29, 2008

    I had a new hard drive fitted, no good. A new control panel - it now works properly, but the sound is wrecked - third engineer visit in the morning.

  • pigeondan May 15, 2009

    I have just got a LG 32LT7 I don't think I have the correct remote for it....does anybody know what the right one should look like?

×

5 Suggested Answers

SOURCE: just got a lg 32lt7

u need to plug jst the antena in the back and then go on auto tuning

Posted on Aug 18, 2008

  • 1 Answer

SOURCE: frozen hard drive

If you have a Thomson DT16300, here's a handy fix that address freeze ups, lack of reception and problems on your Hard Disk:

goto MENU screen
goto SETUP screen
goto HELP screen
At HELP screen, Enter 1397 - this accesses the engineer panel - you can reformat the HDD in this menu - you will lose all recorded programmes and planned recordings but it clears locked or corrupted files

OR - at the HELP screen, press the GREEN button

On the lower half of the screen youwill see 3 options:

Blue - Reformat HDD - clears all the memory/HDD - useful if you have a corrupted file - you will lose all recorded programmes though

Red - reset the whole box to factory settings - good if you have a locked box or reception problems or cannto scan for new channels. It goes back to when you bought the box, so you will have to input favourites and planned recordings again

Yellow - Software revert - allows you to go back to the previous software driver - you may lose new functions, but you can always restore it back again using the same feature

Posted on Jan 04, 2009

vortash
  • 431 Answers

SOURCE: LG RH266 setup with freeview tv

Sorry to say no it wont not unless the Tv set manuel says it has a Duel Freeview feed , you have to get another freeview box for the recorder .
besides If you used the freview in the tv 1 , the tv would have to be on when you wanted to record ?. and 2 you couldnt watch another channel whilst recording another .. only 1 tuner ?. also you could only record the program you had on .at the time no timer facility .
People are still used to the Old system of VHs and the fact that all videos had tuners built in so you could watch and record .. It will come and indeed some more modern DVD recorder have freeview built in again sorry but thats the facts , and dont forget if you want the pay per view channels on free view your going to need a tuner with a pay card port ... Regards Vortash

Posted on May 12, 2009

ricomun
  • 24 Answers

SOURCE: SONY Remote Control - some buttons do not work.

Usually this means the conductive contact on the back of the rubber pad has worn down and cannot connect the circuits on the remote controls main board. There are several ways to fix this.

#1 Find some conductive adhesive or paint and carefully paint the back of the button tab ( let dry completely)

#2 Rear window defogger kits are available at most reputable auto parts shops and contain a paintable adhesive which you can apply to the back of the remote control button.

#3 try super gluing a small piece of aluminum foil to the back of the button tab.

I have used all 3 and they all work good.


Posted on Jul 02, 2009

  • 1 Answer

SOURCE: Disc tray keeps opening/closing on DVD recorder

my dvd player sony cinema entertainment system dav-dz111 the tray is opening again after closing

Posted on Dec 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 50inch LG TV that when switching between programmes the TV goes blank for a moment


Are you using cable and if so which company and box?

ELECTREPAIRUSA@ELECTREPAIRUSA.COM

Dec 07, 2016 | LG Televison & Video

1 Answer

I have a THS220 box and have difficulty recording programmes


Hello Joan,

To record a satellite you will need two scart leads.

Plug one end of the first scart lead into the "DVD/VCR SCART" socket on the back of the satellite receiver, then plug the other end into the "INPUT" scart on the back of the VCR. Take one end of the second scart lead and plug it into the "OUTPUT" socket on the back of the VCR and plug the other end into "SCART IN" socket on the back of the TV.

To record, select the satellite channel you want to record, then, on the VCR, select scart input, (at this point, you can record a satellite program). To watch a satellite channel or recorded satellite channel, select the scart input on the TV.


If you need anymore information, then let me know.

Kind regards,

Ron.

May 04, 2014 | Thomson Audio Players & Recorders

1 Answer

Can the LG 990W VHS VCR receive digital TV signal


VCR is analogue, However you can still use it to record digital programmes when connected via a digital set top box. You can only record the channel you have selected on the screen. In other words, you cannot record a channel programme while watching another channel. I use mine on a second TV and when recorded I take the tape out and put it into my main TV for viewing at a later date. I don't watch too much TV so it works fine for me for the odd programme.

Dec 05, 2010 | LG MG64 VHS VCR

1 Answer

My Thomson Top up TV box will not record. I go to the TV guide, press the R button. It then takes me to 'Planned Recordings' list. I press R again and the programme I want to record disapperas. I get...


Sounds to me like your hard drive is full. Do you use the topup tv part of the box? If not, deselect all the topup tv channels. This will free up a significant amount of drive. Failing that, you'll have to delete some of your programs, sorry!
To deselect topup tv channels;
Go into the menu option, Customise Top Up TV Anytime, and de-activate all the selected channels

Jan 23, 2010 | Televison & Video

1 Answer

Cannot record t.v. programmes after the changeover on video


I put the recorder channel on AV2 and then recorded it. It worked. Thank you anyway.

Dec 29, 2009 | Samsung SV-DVD55 DVD Player / VCR Combo

2 Answers

Stop Substitles on a LG RHT497H 160G dvd recorder?


I have the LG DVD recorder DRT389H which has the same problem. You can't switch off the subtitles during timer recording from the Electronic Programme Guide. The only way I could stop this was to go to the main set-up menu then select the A icon. Select DTV Subtitle and choose a language that the TV programme isn't broadcast in. I chose Gaelic. The only disadvantage is that this stops any subtitles being recorded so you can't access them later.

Dec 26, 2009 | LG RH177 DVD Recorder/HDD Recorder

2 Answers

Cannot record without watching the programme


This unit does not have twin tuner,you would have to watch another channel on the tv.

Dec 03, 2009 | Panasonic Televison & Video

1 Answer

Just got a lg 32lt7 tv and i cant tune in the digi channels all i get is not programmed?


u need to plug jst the antena in the back and then go on auto tuning

May 02, 2008 | LG Televison & Video

1 Answer

Daewoo Setpal VCR SV 900


buy a new one. simple fact is the boxes are defunct now as Daewoo refuse to support them and the latest freeview updates render the box worthless

Apr 04, 2008 | Televison & Video

1 Answer

RECORDING PROBLEM


Connectivity problem. Without knowing your models and their available channels etc., it's very difficult to advise you exactly.
Broadly though ...... you need to get the input signal routing sorted.
Plug your aerial into the Freeview box. Make a connection from its RF out, (beside the aerial 'in' socket) to the aerial 'in' socket on the JVC. Run yet another co-axial connection from the JVC RF 'out' to the television.
Now - connect a scart lead between the JVC and the TV. Power off the freeview. Switch your TV to accept A/V - to show the JVC on screen. Read/go through the 'Set up' procedure on the JVC to scan in the available broadcast channels. When done - connect using a scart between the Freeview box and the JVC. This will be located on either the L1 or L2 channel selection.
IF as it seems you are using the freeview to watch all your programmes - and record in then you are simply watching and recording 'live' change the Freeview programme and the JVC gets that same one arriving in (and sending to the TV)
Unless you need to record Freeview only output - always record from the aerial input. You select via the television remote (and 'TV' selected) and the appropriate channel.
Complex to explain - hope it helps. The one thing to remember - is to make one set of changes at a time - check the result is okay, before moving to the next.

Jan 07, 2008 | JVC DRMH20 DVD Recorder

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73150 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

71694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...