Question about Car Audio & Video

Open Question

I need a wiring harness for a delco radio part number 10317993

Posted by on

4 Suggested Answers

frcs68
  • 1605 Answers

SOURCE: i am trying to put

the red usually is the power input, black is the ground.
attach a ground wire to a 1.5v battery and tap the + of the battery to any of the stripper, when you hear the tap sound from the speaker,that will tell you what wire to which speaker.
if you have any wire left over, try for power ant.

Posted on Apr 17, 2009

  • 256 Answers

SOURCE: I need to know which color wire is for what replacing radio

Normally you red wire is the battery+. Black is ground-. Yellow should be battery backup which should go to your ignition. You wil then have either two sets or four sets of wires depending if its a 2 or 4 channel radio. For instance,Brown, and brown with a white stripe- White and white with a black stripe and so forth. these will be you speaker wires. In every instance you wire with the stripe will be your negative.

Posted on May 05, 2009

  • 51 Answers

SOURCE: i don't found wire harness,

http://wiki.answers.com/Q/What_is_the_stereo_wiring_diagram_for_2006_Chevy_trailblazer

Posted on Feb 27, 2011

Daveatwhips
  • 492 Answers

SOURCE: I have an delco electronics

Is this a stock GMC radio you are putting in your Sierra, if so, visit the scosche or PAC website to see if they have one available. If you are installing an aftermarket radio, then you need to purchase a wiring harness. It will have the color coding on the package. If you don't have the vehicle side of the harness, again, visit the scosche or PAC website for availability. Hope this helps.

Posted on Aug 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an delco electronics radio for my GMC 1500 Sierra 1994. Model no is: 16179985 There is no harness so I need to know what goes where! Many thanks Anders Australia


Is this a stock GMC radio you are putting in your Sierra, if so, visit the scosche or PAC website to see if they have one available. If you are installing an aftermarket radio, then you need to purchase a wiring harness. It will have the color coding on the package. If you don't have the vehicle side of the harness, again, visit the scosche or PAC website for availability. Hope this helps.

Aug 27, 2011 | Car Audio & Video

1 Answer

I want to connect a stock delco radio from a 1997 buick lasaber into a 1997 Grand jeep Cherake the radio has cd/tape/am/fm/ need to know what coler wire goes where. serial man.no. stock no. is 16249434 ...


1997 Buick Lesabre Car Stereo Radio Wiring Diagram
Car Radio Constant 12V+ Wire: Orange
Car Radio Ignition Switched 12V+ Wire: Yellow
Car Radio Ground Wire: Black/White
Stereo Radio Illumination Wire: Gray/Black
Stereo Radio Dimmer Wire: Brown/White
Stereo Radio Antenna Trigger Wire: Dark Green
Stereo Radio Amplifier Trigger Wire: N/A
Front Speakers Size: 5 1/4? Speakersir?t=modilife-20&l=as2&o=1&a=b00009uhre
Front Speakers Location: Doors
Left Front Speaker Wire (+): Tan
Left Front Speaker Wire (-): Gray
Right Front Speaker Wire (+): Light Green
Right Front Speaker Wire (-): Dark Green
Rear Speakers Size: 6? x 9? Speakersir?t=modilife-20&l=as2&o=1&a=b00009uhre
Rear Speakers Location: Rear Deck
Left Rear Speaker Wire (+): Brown
Left Rear Speaker Wire (-): Yellow
Right Rear Speaker Wire (+): Dark Blue
Right Rear Speaker Wire (-): Light Blue

May 12, 2011 | Car Audio & Video

1 Answer

I don't found wire harness, for chevy 2006 equinox, double Din car stereo Radio(Delhi Delco) diagram.


http://wiki.answers.com/Q/What_is_the_stereo_wiring_diagram_for_2006_Chevy_trailblazer

Feb 27, 2011 | Car Audio & Video

1 Answer

Wiring diagram for delco radio model 16194445


i have ac delco radio for my gmc serria and the clock comes on but nothing els

Sep 12, 2010 | Car Audio & Video

1 Answer

I have a 99 GMC suburban. I just replaced the AC


Find a blue wire on the wire harness to the truck and connect from the blue white on the radio. this will turn on the factory amp that runs the rear door speakers

Feb 08, 2010 | Car Audio & Video

1 Answer

I would like to see a wiring dieagram for a 2005 tahoe sterio speakers


Radio 12v red/white + radio harness Radio Ground black - radio harness Radio Ignition (GMLAN Serial Data) Radio Illumination yellow (dimmer) + radio harness Factory Amp Turn-on same as power antenna wire Power Antenna white + radio harness LF Speaker +/- tan - gray +,- radio harness or amplifier Notes: If equipped, the amplifier is under the rear of the center console.

At the amplifier, the left subwoofer wires are dk. blue/white (+) - lt. green/black (-). The right subwoofer wires are dk. green (+) - lt. blue/black (-). RF Speaker +/- lt. green - dk. green +,- radio harness or amplifier LR Speaker +/- brown - yellow +,- radio harness or amplifier RR Speaker +/- dk. blue - lt. blue +,- radio harness or amplifier clear.gifthat should be it **** if u need more help feel free to email me at bertman285@hotmail.com

Oct 05, 2009 | Car Audio & Video

2 Answers

I need an elecrical wiring routing diagram for a


Radio 12v, blue/red, +, radio harness
Radio Ground, black/yellow, -, radio harness
Radio Ignition, orange, +, radio harness
Radio Illumination, lt. green/red, +, radio harness
Factory Amp Turn-on, blue/black, +, radio harness
Power Antenna, N/A,,,
LF Speaker +/-, red - white," +,-", radio harness or amp
RF Speaker +/-, blue - yellow," +,-", radio harness or amp
LR Speaker +/-, purple - pink," +,-", radio harness or amp
RR Speaker +/-, white/blue - black/blue," +,-", radio harness or amp thats for non bose 04

Sep 21, 2009 | House Brand Car Audio & Video

1 Answer

I am trying to put a delco radio in a 93 ford thunderbird but the harness is striped to just wires i need the color coding on them so it will work


the red usually is the power input, black is the ground.
attach a ground wire to a 1.5v battery and tap the + of the battery to any of the stripper, when you hear the tap sound from the speaker,that will tell you what wire to which speaker.
if you have any wire left over, try for power ant.

Apr 17, 2009 | Car Audio & Video

1 Answer

Adding line out inputs for RCA cables to amp


Hello ssmotorcity,

Here's a link to modifiedlife's Durango page showing the wire colors.

http://www.modifiedlife.com/2005-dodge-durango-car-radio-stereo-audio-wiring-diagram/

If you are adding a LOC for an amp to drive a sub, you are probably better off using the rear speaker wires, the last four wires shown on the listing. If you are adding an amp to drive all 4 channels, then of course, you need to convert both fronts and rears. The simple method is to tap directly into the appropriate wires and connect them to the line converter. If you do not want to tap the wires, you can purchase aftermarket wiring harnesses that are made to plug directly into your vehicle radio and/or the vehicle wiring harness. The Metra part number for a stock radio harness is 71-6502. It plugs into the radio and provides pigtail connections for power and speakers. There is, of course, a harness that plugs into the vehicle harness itself, allowing you to make the connections without any cutting or tapping of the original wiring.

Hope this helps.

Apr 16, 2009 | Car Audio & Video

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4724 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...