Question about Car Audio & Video
does your radio ask for the code when you turn on the ignition key. If you see _ _ _ _ or **** you should enter the code using the pre set numbers for your radio, ie, first code should be entered using the first pre set key on the radio ( number one ).
Followed by the second code number being entered using the second pre set button and so on until all of the code is entered.
After entering the full code the radio should accept, if not enter code again and press the next pre set key following, ie, if the code is 4 digits, press the fifth.
Hope this works.
If all this fails most garages will set the security code for you for a small charge. Make sure you take proof of car ownership otherwise they will normally refuse to reset the code. This is to foil theft.
Posted on Nov 12, 2007
Tips for a great answer:
Sep 04, 2011 | Car Audio & Video
Jul 08, 2011 | Car Audio & Video
May 09, 2011 | Philips Car Audio & Video
Feb 13, 2011 | Car Audio & Video
Jan 27, 2011 | Car Audio & Video
Nov 08, 2010 | Car Audio & Video
Jun 30, 2010 | Car Audio & Video
May 08, 2009 | Car Audio & Video
Jun 19, 2008 | Car Audio & Video
64 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: