Question about Hand Tools

1 Answer

HMD57SMH hand mixer

I require the two drive gears to drive the mixer blades

Posted by on

  • Erick Beckwith May 11, 2010

    what kind of mixer is it

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hand Tools Master
  • 71,231 Answers

What isthe brand name.

Posted on Nov 25, 2008


1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't the blades spin on the mixer ?


what sort of mixer is it? If it is a small hand help are the mixing blades fully inserted up to the little bumps on the side of the rods of the mixer blades where they attach to mixer. If a larger mixer like a kenwood, agin make sure the blade / s are properly inserted.

Aug 18, 2014 | Food Mixers

1 Answer

I have a A701A mixer and require a new planet gear which is made in nylon. This gear drives the mixer attachments. Where can I get this gear?


Please post your query to the following link and send details to the customer care/contacts link:
www.kenwoodworld.com/en-my

www.thefind.com/appliances/???browse-kenwood-mixer

Sep 29, 2010 | Kenwood KM800 Major Classic Stand Mixer

1 Answer

Blades won't turn - motor seems ok


It is most likely a stripped gear and most likely the worm gear which is driven by the motor shaft. Here is a link to the parts manual which contains the listing of the gears and shows you how to split the gear case.

http://shared.whirlpoolcorp.com/assets/pdfs/literature/Repair%20Part%20List%20-%208212010.pdf

Remove the chrome ring with a screwdriver by prying it off carefully. This exposes 5 screws, however they can't be accessed on all models. Remove the pin (17) that goes through the planetary housing and the drive shaft, and carefully drive the planetary housing from the shaft to expose the screws. Then remove the two remaining screws and split the case to expose the gears. The worn gears will be obvious. Also check the bearings. Replace all affected parts. Remove all grease since gear pieces will have contaminated it from any worn out gears. The grease is a special food grade grease which you can purchase along with the gears and bearings.

Apr 06, 2010 | KitchenAid KSM150PS Artisan Series Stand...

1 Answer

Broken mixer blades on a bravetti 300watt hand held mixer


Bravetti Mixer Beaters 10+ Bravetti Products Shop, Compare and Save at Pronto.Bravetti.Pronto.com

Nov 02, 2009 | Bravetti 130 Watts EP524H Hand Mixer

1 Answer

Blade will not turn


motor will hum but no blade turn if bottom seal worn and material leaks into shaft. Rekove drive head and try turning shaft if nio go dissasemble entire unit ,clean and service, replace seals

Sep 20, 2009 | Robot Coupe MP600 750 Watts Hand Mixer

1 Answer

Hi,we have an old kenwood chefette hand mixer with worn parts.


does anyone know how I could get the whisk beaters for a Kenwood A375? Was given mixer but no whisks!!

Jul 29, 2009 | Kenwood Food Mixers

1 Answer

My west bend hand mixer (model # 41015) blades do not turn


your unit is not worth repairing parts will be very hard to get this unit is usally a throw away unit

Dec 10, 2008 | West Bend 41036 Mixer

1 Answer

Regarding the Sunbeam Mixmaster (model 2346): How do I remove the front cover of the mixer so that I may reallign or replace the beater gears?


Pry the beater release button out with a screwdriver. There are two screws underneath it and one under the motor housing between the the beater holes. This will allow you to remove the chrome front cover, but not the motor and drive assembly. Getting to the part that contains the gears requires complete disassembly of the mixer. It is not designed for service, and requires patience and a variety of tools to disassemble.

It has a metal worm gear and plastic drive gears. If the beaters are out of alignment, then one or both of the plastic gears are stripped and the mixer is junk. Repair plus shipping costs equals the price of a new mixer. This is the weak point of these mixers and a fundamental flaw in an otherwise robust and sturdy design. It is definitly not the same mixer *********** bought 30 years ago.

Jul 18, 2008 | Sunbeam 2346 Heritage MixMaster Series...

Not finding what you are looking for?
Hand Tools Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hand Tools Experts

yadayada
yadayada

Level 3 Expert

71162 Answers

Don Numinen
Don Numinen

Level 2 Expert

55 Answers

Bill Boyd

Level 3 Expert

38850 Answers

Are you a Hand Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...