- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Tries websites like Amazon.com,Ebay.com buy a set that call a DVD or CD disc laser eye cleaner.Used it might help.If still happening than the laser eye itself it is dying and to be dead soon.DVD players that are having laser eyes are dying or don't read DVD or CD disc like say no disc all the time.Are not repairable except replaced the whole laser eye data's reader itself not practical,because u can a whole new basic DVD player just the same prices or even cheaper.These day a basic DVD players u can buy it like $40 brand new at any major box retailers stores like Walmart,Target..extra.
When you put disc in dvd player tray, optical laser got initialized automatically and all previous data in memory of player erased. You should not worried about laser movement because its control by servo section of dvd player circuitry. Kindly contact Samsung to provide warranty cover of your newly player. Need further info, let me know please.
Not reading anymore DVD movies disc or CD musics disc.The DVD laser eye head reader it is dead.Can't be repair must be replaced,not worth it well cost the same price as a new DVD player unit,if repair by a tech and have to buy parts for it.Basic DVD player unit are very cheap these day.U can buy a new one just a basic DVD player only will cost u like $40.
Hi, Unfortunately , Some DVD players cant read some DVD s and then it gives either "loading" or " no disc"..reading on the display... it generally happens when you want to play "A copied DVD/CD " taken from somewhere else.. Just
to make sure that such DVD is ok ,you can try to run them on your
laptop.If the disc itself has problem, laptop does not read either.. Just in case,quick remedy ,pls Clean your DVD player's LASER lens .. A clean DVD player Lens ensures that
your DVD disc would be read properly. Unfortunately, your DVD player's
Lens accumulate as much dust and lint as the other parts of the DVD
player. There are many available DVD lens cleaner kits
that you can purchase and use to clean your DVD player.
YOUR DVD disc itself should be clean and finger prints free as well.... Here are three suggested DVD Lens Cleaner that should do the job of cleaning your DVD Player's lens. Memorex Laser Lens Cleaner for DVD
- This cleaner contains six soft brushes that gently remove dust, dirt
and other airborne contaminants from your DVD player's lens. (Price:
$6.09) Maxell DVD-LC DVD Lens Cleaner
- This DVD Lens cleaner features the "Thunderon Brush System" and
include tests for audio performance including Dolby 5.1 surround sound.
It also features an interactive on-screen instructions in 8 languages
including system set-up. (Price: $10.81) Allsop 23321 Carbon-Edge DVD and CD-Drive Cleaner
- This DVD Lens Cleaner features an 8 brush carbon-system with carbon
edge that removes static build-up from your DVD Players. It prevents
skipping and also improves the sound and picture output of your DVD
if this remedy does not help and if your set has
still under warranty ,consult to service they may replace the LASER Reader
EYE...most of the time Laser Eye malfunctions and does this.. if it is not under warranty ,never ,never have someone repaired it..go buy a new one,It will be cheaper.. ... Hope this helps! Take care and please Remember to rate/vote and give me 4 Thumbs Up for me to continue for Helping out the Community :) Thanks
In most cases when the CD does not play it is possible that the optical head is a suspect. Sometimes it might pick up ordinary audio CD but will not play other formats. This indicates that the optical head is weak and so there is no detection or scanning of the CD . If the optical is working the tracks will be read immediately but with no scanning the laser head can be defective.
Now since you have changed with a new one ( please make sure that the solder jumper was removed which is for static damage security in the new unit)
The main motor will not work in some cases as unless the tracks are read the drive motor will not work with signal from the processor. Sometimes certain cleaner disks will not be tracked to run for cleaning as it will not be read and so will reject. Hence it is ideal to manually clean the laser head eye using a cleaning swap /cotton bud with gentle pressure on the lens eye. If there is no result then watch if the CD spins or tries to spin. If so the board seems to work unless a test is taken on the main board but the possibility of a defective optical head can be the suspected fault. If any of the above seems otherwise we must recheck with possibilities of a malfunction of the main processor board
Hi, You are not alone...Some DVD players wont read the DVD s and then it show no disc.. it generally happens when you want to play "A copied DVD/CD " taken from somewhere else.. Just
to make sure that such DVD is ok ,you can try to run them on your
laptop.If the disc has problem laptop does not read either.. if your set has
still under warranty ,consult to service they may replace the LASER
EYE.. ("cross your finger ! " )..most of the time Laser Eye malfunctions... Just in case,quick remedy ,I recommend to buy a "wet DVD/CD laser cleaner "
from any store.it is available at Electronic Stores ..And clean the laser eye
at least twice.. YOUR DVD itself should be clean and finger prints free as well.... Hope this helps! Take care and please Remember to rate/vote and give me 4 Thumbs Up for me to continue for Helping out the Community :) Thanks
Put in an ordinary audio CD and play to notice if the CD is detected. If yes the optical is working, if not there is no laser scanning and the possibility that the laser head can be defective. Now certain cleaner disks will not be tracked to run for cleaning as it is not read. Hence it will reject. So it is ideal to clean manually the laser head eye using a cotton bud with gentle pressure on the lens eye. If there is no result then watch if the CD spins or tries to spin. If so the board seems to work unless a test is taken on the main board but the possibility of a defective optical head can be the suspected fault. If any of the above seems otherwise we must recheck with possibilities of a malfunction of the main processor board
Ur DVD disc movie work,only CD music have problems?Laser eye,might be dirty,not reading the laser disc.Tries websites like Amazon.com,Ebay.com to buy a Laser eye cleaning kit.Just put in the disc,play it,will clean the laser eye,it'll tell u when it finish and to take the disc out.