Question about Universal Office Ink Tank Cartridge for BJC 3000/6000/S400/S450, Replaces Canon BCI-3EC, Cyan Printer

1 Answer

How to replace ink cartridge in canon pixma IP1800

Don't know how to remove old cartridges

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Make sure that the ink cartridge is in the docking posistion on far left hand side of printer. press down firmly on the cartridge and then slide it out.

Posted on Jun 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have to get a letter typed and don't know how to open the machine to change the ink????


  1. Open the cartridge access door. Figure 4: Open the cartridge access doorc00127636.gif
  2. Raise the cartridge latches for both cartridges. Figure 5: Raise cartridge latchesc00127637.gif
  3. Remove the protective tape from the end of the cartridges. Figure 6: Remove tapec00127639.gif
  4. Insert the cartridges into the carriage. Figure 7: Insert cartridgec00127642.gif
  5. Close the latches, and then close the cartridge access door. Figure 8: Close latchc00127644.gif The control panel displays a message prompting you to align the cartridges.
  6. Press the Enter button to start the cartridge alignment. Wait until the alignment completes before continuing.

Jun 24, 2011 | HP PSC 750 All-In-One InkJet Printer

1 Answer

Changed toner---back side now prints dirty with band on the top. Did the cleaning procedure - no luck


If you changed toner because old was empty and now you have this defect with the new cartrige, it is most likley a defective cartridge. Try the old cartridge again, if it prints clean, then you know for sure it is the cartridge. If you purchased a new HP cartridge, get it replaced by HP, they warranty their toners against defects. If you bought a 3rd party toner, return it to where you bought it and get them to replace it. If you had your old toner refilled by someone, get your money back, they don't know what they are doing. This type of defect is often caused by a filled waste toner bin then then runs back out when you print. Some refillers just throw toner in and don't empty the waste toner bin.

Jun 07, 2011 | Office Equipment & Supplies

2 Answers

Do the reset chips really work on the cartridges of HP 2500N laserjet printer


Yes, reset chips really work on laser printer cartridges, if you have a know good source for the chips and if you know what your doing, you can't put a new chip on an old cartridge, the chip is what registeres how may prints you will get out of the cartridge if you put a new chip on an old or 1/2 empty cartridge of course it will say it's full but then try and print.It will register as a full cartridge but it can only print with the amount of toner that is actually left in the cartridge, be careful there are alot of remanufactures out there that don't put new chips on or that do but don't fill the cartridge full, or replace all the wipers and drums, they just dump some toner in and say here you go, Only buy your remanufactured cartridges from a reputable company, do your research on them first or you'll be sorry

Aug 14, 2010 | HP LaserJet 2500N Printer

1 Answer

I need help removing an empty ink cartridge from canon mp480 printer


just open the cover .when you open the cover cartridge will come to center just pull all the cartridges one by one don’t make pressure too hard it will come easily if you put more pressure and try to removing it and it is not come out then don’t do it may be you doing wrong . let it be and take help from some one who using printer and know how to fix the cartridges.
Have a nice day and do not forget to rate please...!

Feb 15, 2010 | Canon Pixma MP480 All-In-One InkJet...

1 Answer

Printer cartridge problem ( Printer HP officejet 5610 All-in-One)


you need to replace color cartridge
or refill an old one if you have one


utube.png You-Tube video "sOriLrbuBao" placeholder (do not delete) utube.png

utube.png You-Tube video "II9gpIXs_lE&feature=related" placeholder (do not delete) utube.png

Dec 02, 2009 | HP Officejet 5610 All-In-One InkJet...

1 Answer

Can't change ink on dell 810. what do I do first? I don't know how to change ink in dell 810,I couldn't see how to take old one out as well and how to put new one please


Lift the priner unit lid on the printer llift he print cartridge lid,
The ink cartridge carrier moves and stops at the loading position unless the printer is busy.

Press down on the ink cartridge lever to raise the ink cartridge lid.
Remove the old ink cartridge.
Dispose of the old cartridge properly.

If you are installing a new ink cartridge, remove the sticker and transparent tape from the back and bottom of the ink cartridge.

Insert the new ink cartridge.

Snap the lid closed.
Lift the printer unit, and hold the scanner support up while lowering the printer unit until it is completely closed. Let me know if you have any questions.

Apr 14, 2009 | Dell 810 All-In-One InkJet Printer

1 Answer

Ink cartridge


you have to on the printer. Then you open up the front cover, the cartridge place will move to the center of the printer.  push the lock button of the cartridge and you may remove the old cartridge. You have to remove the old cartridge and change with the new one.

May 06, 2008 | Lexmark Z600 InkJet Printer

1 Answer

Printer goes through motion, but no prints. New cartridges.17 and 27


The safety strip found at the bottom of the cartridges might not have been removed, if its removed take a damp paper towel, press and hold it against the ink nozel n check whether u find ink on the paper or not. If u don find then u might have got a old cartridge n the ink might have dried in that.

Apr 23, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

1,108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Universal Office Office Equipment & Supplies Experts

kakima

Level 3 Expert

98816 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

63990 Answers

Are you an Universal Office Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...