Question about EliteGroup P6STP-FL Motherboard

1 Answer

How to get display of CPU on TV

I want to know which is the ways to connect CPU to TV ..iv heard abt the a chip which i can connect to PCI slot on the board but im not sure about the picture quality ..and about VGA to S-Video wire but dont know which is the best option can anyone help me wiht this ...thanks ...

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 69 Answers

Im guessing you mean Computer to TV
If your TV has d-sub input you can connect straight from computer to TV.
If u use s-video and you have a graphics card that supports s-video, then you can do that. or you can have a composite connection which is not a very good quality connection.

Then "Chip" you are talking about is just a graphics card. A good graphics card should support composite, component, s-video, d-sub and DVI and rarely HDMI

Posted on Oct 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Two components that must utilize the same front bus speed


Let's dissect the question

I feel it may help you understand better. Looks like a test. The purpose of a test is to see what you know.........

Bus,

http://en.wikipedia.org/wiki/Bus_%28computing%29

Front Side Bus (FSB)

http://en.wikipedia.org/wiki/Front-side_bus

Now you know what a BUS is, and a Front Side Bus.
Now let's apply that to a Motherboard Diagram, and see if that makes it clearer.......

http://en.wikipedia.org/wiki/File:Motherboard_diagram.svg

You see how the CPU (Processor), is connected to the Northbridge chip, (Of the motherboard chipset)

Data (Information) transfers back, and forth through the FSB, to the Northbridge chip.

Think of the FSB as an 'Information Highway'.

Now,.............what other component besides the CPU, has to operate at the same frequency rate ('Speed'), as the Front Side Bus?

Correct

The Northbridge chip

As you can see the Northbridge chip handles the Faster capabilities of a computer;
CPU (Processor), Ram Memory, and HIGH-speed graphics; plus Jennifer Aniston.

NO! You gonna' believe that? Just messing with you about the Jennifer Aniston thing!
(She is HIGH speed though! Whoa!)

HIGH-speed graphics being the AGP technology, and the PCI Express technology.

A graphics card inserted into a PCI slot, OR using Integrated (OnBoard) graphics; is NOT high-speed graphics

The Southbridge chip handles the Slower capabilities of a computer;

Anything connected to the;
A) PCI bus. (Like a PCI graphics card)

B) Integrated graphics. (Should be stated as OnBoard Graphics.
Easier to understand. ON the motherBOARD)

C) IDE (PATA) bus,

http://en.wikipedia.org/wiki/Parallel_ATA

D) SATA bus,

http://en.wikipedia.org/wiki/Serial_ATA

E) USB bus
F) Ethernet
G) Audio (Sound)

Ram Memory TYPICALLY operates at half, of the Processor's FSB.
I say again -> TYPICALLY
Overclockers would like ram memory to operate at the same frequency rate ('Speed'), as the processor's FSB.

Problem is folks, the expansion slots are also dependent on the CPU's (Processor's) FSB

Mess with the CPU's FSB too much, and ram memory won't operate, and neither will the expansion slots.


Bear in mind Bud, that this is rapidly becoming old technology.
However, you have to know this technology, to be able to understand the Intel Core i technology.

This technology does NOT use a Front Side Bus,

http://www.hardwaresecrets.com/article/535

http://en.wikipedia.org/wiki/Intel_QuickPath_Interconnect

Regards,
joecoolvette

Apr 17, 2013 | Computers & Internet

1 Answer

How to find motherboard details on assembled p4 computers


on the board there are numbers near the pci slots or cpu socket area pci are white plastic slots look on the side of them too

Feb 03, 2013 | PC Chips Computers & Internet

1 Answer

How to install saa7134


Open your CPU casing then install your pci capture card to one of your motherboard PCI slot you can Find it just read the slots of your motherboard they have a label on it some times PCI slot of a motherboard support multiple PCI slots just connect it on one of that slot..After installing install the installation software CD which is included in the package.

Jul 07, 2011 | Philips SAA7130 TV Tuner/FM Radio/Video...

3 Answers

What are the basic parts of the intel motherboard?


cpu, video card.hard drive, floppy drive cpu fan, power supply, is the battery good first for cmos, are all the connection right. is the power supply good.is the mem.right in the slots is it ddr or ddr2 do you have the right speed on cpu for board as well as mem , what is the intel board numbers on it d915 or what i need to know which board to find out anymore ok jim

Jul 04, 2011 | Intel Motherboard

1 Answer

What are the functions of its parts?


1) Motherboard Diagram, (Proper computer speak for motherboard is Mainboard. I just use Mobo.
MOtherBOard)

http://en.wikipedia.org/wiki/File:Motherboard_diagram.svg

2) Soyo SY-KT400 Dragon Ultra - motherboard diagram,

http://techreport.com/articles.x/4139


CPU = Central Processing Unit. Another term is Microprocessor, or simply Processor for short.
The 'Brain' of the computer.

The Processor sits in a processor socket.
The processor socket for the Soyo SY-KT400 is a Socket A. Also known as Socket 462.

http://en.wikipedia.org/wiki/Socket_462


The motherboard chipset is the Northbridge chip, and Southbridge chip.

The motherboard chipset for the Soyo SY-KT400 is the VIA KT400 - Northbridge chip, and the VIA VT8235 - Southbridge chip.

http://en.wikipedia.org/wiki/List_of_VIA_chipsets#Slot_A_and_Socket_A


The Northbridge chip handles the Faster capabilities of the computer.

The Northbridge chip determines what Processors can be supported, what Ram Memory can be supported, and High-Speed graphics.

High-Speed graphics being AGP and PCI Express, not a graphics card installed in a PCI slot, nor Integrated Graphics.

The Processor communicates with the Northbridge chip through the Front Side Bus. (FSB)
Think of the FSB as an 'Information Highway'.

The Northbridge chip communicates TO the Southbridge chip through the Internal Bus.

The Southbridge chip handles the Slower capabilities of the computer.

The Southbridge chip handles IDE, SATA, USB, Ethernet, Integrated Graphics, and the PCI bus.
(As in a graphics card installed in a PCI expansion slot, for one example)

Also handles information from the Super I/O chipset.
The Soyo SY-KT400 - Super I/O chipset is a VIA VT1211

There are 5 PCI slots. All connected to the PCI bus, which is connected to the Super I/O chipset.


Click on this link,

http://techreport.com/articles.x/4139/2

Scroll down a little bit to the photo of the Soyo SY-KT400 motherboard.

A) At the top middle is the Processor socket. White in color, rectangular in shape, square hole in the middle, and socket holes on it.

To the immediate left of the Processor socket are 8 Electrolytic Capacitors in a row.
These capacitors are Radial Aluminum Electrolytic Capacitors. (Used all over the motherboard)

These particular 8 are part of the motherboard voltage regulator circuit.
Specifically, voltage regulation for the Processor.

B) To the right of the Processor socket are three long Black Ram Memory slots. (Proper computer speak for Slot, is Bank. 3 Ram Memory Banks)

C) The Blue and the White connectors to the right of the Ram Memory slots are IDE connectors.
One for the Harddrive, the other one for the optical drive/s.

D) Underneath the Processor is the Northbridge chip. There is a clear fan sitting on it.

E) The large square Black chip with VIA on it, below the Ram Memory slots, and to the right of the purple PCI slots, is the Southbridge chip.

F) The 5 purple long slots are PCI expansion slots.

G) To the right of the bottom purple PCI slot is the CMOS battery.

H) Above the purple PCI slots is a brown AGP slot.
Uses AGP 8X graphics cards

Nov 29, 2010 | Soyo KT400 Chipset MotherboardAMD Socket A...

1 Answer

My Compaq 5500 monitor blinks with amber light and no display appears.When I pluged out the signal cable the status remians same.Pls help me out


First open cpu cabinet.
Then refix RAM memory.
Pull cmos cell for 10 minutes so all settings of motherbord are defaults.
Then pull porcessor fan and processor clean dust from all chip and parts.
Remove pci cards from pci slot then check.
Let me know if you need more assistanse.
Thanks.

Sep 21, 2009 | Compaq MV 5500 (Carbon, Silver) 15 in.CRT...

2 Answers

PROCESSOR, MOTHERBOARD AND POWER


This is a printout of the specification for the Gigabyte motherboard GA-MA785GT-UD3H


products_spec.aspx&websource=www.google.com.au%2fsearch%3fhl%3den%26q%3dgygabyte%2bga-ma785gt-ud3h%2bspecs%26btng%3dgoogle%2bsearch%26meta%3d%26aq%3df%26oq%3d&sourceweb=
arrow_down_deepgray_7x7.gif Specifications CPU
  1. Support for AM3 processors: AMD Phenom™ II processor/ AMD Athlon™ II processor
Hyper Transport Bus
  1. 5200 MT/s
Chipset
  1. North Bridge: AMD 785G
  2. South Bridge: AMD SB710
Memory
  1. 4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory (Note 1)
  2. Dual channel memory architecture
  3. Support for DDR3 1800(O.C.) /1666/ 1333/1066 MHz memory modules
Onboard Graphics Integrated in the North Bridge:
  1. 1 x D-Sub port
  2. 1 x DVI-D port (Note 2)(Note 3)
  3. 1 x HDMI port (Note 3)
Audio
  1. Realtek ALC889A codec
  2. High Definition Audio
  3. 2/4/5.1/7.1-channel
  4. Support for Dolby Home Theater
  5. Support for S/PDIF In/Out
  6. Support for CD In
LAN
  1. Realtek 8111C chip (10/100/1000 Mbit)
Expansion Slots
  1. 1 x PCI Express x16 slot, running at x16 (PCIEX16_1) (Note 4)
  2. 1 x PCI Express x16 slot, running at x4 (PCIEX4_1) (Note 5)
    (The PCIEX16_1 and PCIEX4_1 slots support ATI Hybrid CrossFireX technology and conform to PCI Express 2.0 standard.)
  3. 3 x PCI Express x1 slots (The PCIEX1_2 and PCIEX1_3 slots share the same PCIe bus with the PCIEX4_1 slot.) (Note 5)
  4. 2 x PCI slots
Storage Interface South Bridge:
  1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
  2. 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices
  3. Support for SATA RAID 0, RAID 1, RAID 10 and JBOD
iTE IT8718 chip:
  1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive
IEEE 1394 T.I. TSB43AB23 chip
  1. Up to 3 IEEE 1394a ports (1 on the back panel, 2 via the IEEE 1394a bracket connected to the internal IEEE 1394a header)
USB Integrated in the South Bridge
  1. Up to 12 USB 2.0/1.1 ports (6 on the back panel, 6 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
  1. 1 x 24-pin ATX main power connector
  2. 1 x 8-pin ATX 12V power connector
  3. 1 x floppy disk drive connector
  4. 1 x IDE connector
  5. 6 x SATA 3Gb/s connectors
  6. 1 x CPU fan header
  7. 2 x system fan header
  8. 1 x power fan header
  9. 1 x front panel header
  10. 1 x front panel audio header
  11. 1 x CD In connector
  12. 1 x S/PDIF In/Out header
  13. 2 x IEEE 1394a header
  14. 3 x USB 2.0/1.1 headers
  15. 1 x parallel port header
  16. 1 x serial port header
  17. 1 x chassis intrusion header
  18. 1 x power LED header
  19. 1 x clearing CMOS jumper
Back Panel Connectors
  1. 1 x PS/2 keyboard or PS/2 mouse port
  2. 1 x D-Sub port
  3. 1 x DVI-D port (Note 4) (Note 5)
  4. 1 x HDMI port (Note 5)
  5. 1 x optical S/PDIF Out connector
  6. 1 x IEEE 1394a port
  7. 6 x USB 2.0/1.1 ports
  8. 1 x RJ-45 port
  9. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
  1. ITE IT8718 chip
H/W Monitoring System voltage detection
  1. CPU/System temperature detection
  2. CPU/System fan speed detection
  3. CPU overheating warning
  4. CPU/System fan fail warning
  5. CPU/System fan speed control (Note 6)
BIOS
  1. 2 x 8 Mbit flash
  2. Use of licensed AWARD BIOS
  3. Support for DualBIOS™
  4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
  1. Support for @BIOS
  2. Support for Q-Flash
  3. Support for Xpress BIOS Rescue
  4. Support for Download Center
  5. Support for Xpress Install
  6. Support for Xpress Recovery2
  7. Support for EasyTune (Note 7)
  8. Support for Easy Energy Saver
  9. Support for Time Repair
  10. Support for Q-Share
Bundle Software
  1. Norton Internet Security (OEM version)
Operating System
  1. Support for Microsoft® Windows Vista/ XP
Form Factor
  1. ATX Form Factor; 30.5cm x 22.9 cm
Note (Note 1) Due to Windows Vista/XP 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
(Note 2) The DVI-D port does not support D-Sub connection by adapter.
(Note 3) Simultaneous output for DVI-D and HDMI is not supported.
(Note 4) If you are installing a PCI Express graphics card, be sure to install it in the PCIEX16_1 slot.
(Note 5) The PCIEX1_2 and PCIEX1_3 slots share bandwidth with the PCIEX4_1 slot. When the PCIEX4_1 slot is populated with a x4 card, the PCIEX1_2 and PCIEX1_3 slots become unavailable.
(Note 6) Whether the CPU/system fan speed control function is supported will depend on the CPU/ system cooler you install.
(Note 7) Available functions in EasyTune may differ by motherboard model.

Aug 07, 2009 | Gigabyte Computers & Internet

2 Answers

What is DDR2 graphic cards ? help


Let's make this clear, There are many factors that contribute to a videocard's performance. The BUS which is the connection from the card itself to the Motherboard , though not the most important, is one of them.
PCI is extremely slow compared to PCI express and a videocard with PCI bus suffers from a strong bottleneck that makes it quite unsuitable for 3D graphics.
a PCI card is good as second display adapter to connect extra monitors to your pc: handy feature for data monitoring and multitasking but not that much as a gaming card.
Your motherboard does not have an AGP slot, but also has an Intel integrated graphic chip, so a PCI Nvidia 9400 will be quite a big upgrade, but don't expect high gaming performance...
furthermore Graphic memory speed has a big impact on performance, but size does not.512MB DDR2 is a big but slow memory and 1GB I can say it's totally useless, you need to use a resolution way over full HD to take advantage of it, but a PCI card performs really bad on that.

Mar 04, 2009 | Intel Celeron D 325 2.53GHz 533MHz 256KB...

1 Answer

No video


ok fine i think there exists some problem in the cable connecting from the CPU to the monitor just try removing that & inserting it again ....

if the same problem persists then there may be some problem in the port of the video card just take tester & test is there power supply or not ....

if there is no power supply then some of the capacitor on the video card might have burned out due to this ports will not be working ....

if there is power supply then there will be one IC(integrated circuit ) on the motherboard just near by the AGP or PCI express slot (i think in your motherboard there are 3 IC s near there)
in those 3 IC s if some IC goes means also you will not get the display ...

(the video must be inserted to the PCI express slot or AGP slot only) you must not insert it on PCI slots ...
you make a difference of PCI or AGP slot as this will be only 1 or 2 on every motherboard & it will be smaller in size than the PCI slots & there will be colour difference(may be the PCI slots will be white colour & AGP or PCI express slot in black or brown colour it depends on the motherboard)
check on which slot you have inserted it & insert it correctly if you inserted in some other slots ...

remove the video & insert it again & try check the cables the cable may be loose contact ...

any doubts you can reply me
i am always here to assist you
thank you
bye
dnt forget to rate my solution

Jul 03, 2008 | Computers & Internet

6 Answers

Chips M863G V1.5 Motherboard


This type of problem is so common nowadays. What I did is open up the casing, pulled out the RAM and by using pencil eraser, rubbed the contact pattern. Put it back and turn on your computer. Always work for me and hope it might work for you too.

Feb 08, 2008 | Chips M863G V1.5 Motherboard

Not finding what you are looking for?
EliteGroup P6STP-FL Motherboard Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top EliteGroup Computers & Internet Experts

David
David

Level 3 Expert

778 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Tony

Level 3 Expert

2600 Answers

Are you an EliteGroup Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...