Question about Citizen CBM-1000 Thermal Printer

Open Question

Printer cutting extra inches of blank paper after my order spits out

I tried the CBM1000 No Cut and got about 4 inches of blank paper attached to the receipt. Also tried the CBM1000 Reduced (Cut) driver with results similar to the Partial Cut driver.

Posted by on

1 Suggested Answer

SOURCE: Slow Printing

is it serial or parallel?
If it's serial, You can change the com port settings (baud rate) to a higher speed. You would need to change the dips on the printer to read the same Baud rate.

Posted on Apr 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We are using 8 1/2 x 11 letter size paper. When we print, the top of page is cut off. How do we correct the alignment?


Have you checked the top margin setting of your print job. It should be less than 1/4 inch. If set higher it may cut off the top of the page, before it's sent to the printer. The printer will not print anything within 1/4 inch of the edge of the page, by design.

Feb 01, 2011 | HP LaserJet 6p Printer

1 Answer

Extra Long Receipts


we have Star TSP 700II and it is doing the same. not just 4inches but sometimes it adds extra 20-30 inches blank space. I think it was due to incorrect paper size settings.
Why dont you to go printer properties->Device settings and change the Friction size..as well as set Pagecut to Partial.
Also change preferences under Properties, advanced and change papersize to what suits you .
pl let me know what happens soon
sean

Feb 09, 2010 | Star Micronics TSP100 Thermal Printer

1 Answer

Right side of text doesnt print


Many of these wont' print edge to edge but there may be a setting for it. start>printers (might be in control panel in yours) slect properties for the printer and advanced proterties then printing preferences (specific to your printer) and see if there are any settings. many of these have a 3/4" blank are down one side where it feeds the paper. try to rotate the print 180 (in your print settings) if possible.

Apr 28, 2009 | HP PSC 2175 All-In-One InkJet Printer

1 Answer

Problem Printing Sheet Paper with the Epson 9800


On the machines control panel set to sheet fed (pressing the left button will change from Sheet, roll and roll with cut). In the print settings select your paper profile. On the page setup choose sheet. In the pull down menu you should only have basic paper sizes, no custom size. choose 20x30 and try again.

let me know if this helps

Feb 02, 2009 | Epson Stylus Pro 9800 InkJet Printer

1 Answer

Star tsp100 printer feeds extra paper


check that the paper type is set to receipt and not ticket in the printer properties: device settings.

Jan 14, 2009 | Star Micronics TSP100 Thermal Printer

1 Answer

Printer cuts off top 1 inch of PDF document


Go to the printer properties and try setting it up with border less printing.

Cheers

May 23, 2008 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Scanner cuts off the top 1/4 inch every time I scan.


This sounds like a setting in your software.  Perhaps making sure that you're scanning the right size paper.  Also, look on the printer to see if there's a setting to choose the right size paper.

Oct 28, 2006 | Dell 1600n All-In-One Laser Printer

Not finding what you are looking for?
Citizen CBM-1000 Thermal Printer Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Citizen Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Citizen Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...