Question about Baby Lock Imagine

1 Answer

Baby Lock Imagine

Haven't used my serger for a long time. Don't know where owners manual is since I moved. Wanted to make rolled hem on light weight cottom. Don't know the settings. (I've tried a million combinations) I either get whiskers or the loop on reverse sticks out over the edge. Any suggestions?
Thanks

Posted by on

1 Answer

Here are rhe directions from the manual of "Image" model BLE1AT: 3 Thread Rollled Edge
With the stitch selector set on "D", a narrow edge can become a rolled edge. Remove the left needle and the corresponding thread. Clear the stitch fingers. Turn the stitch length adjusting dial clockwise into the rolled hem range and set the dail at 1.5 Set the stitch width to 3.5

Hope this will be of some help. Good luck and have a great day! Lisa

Posted on Oct 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set Bernette serger 203 for rolled hem


Be sure you have the proper foot for your machine to make a rolled hem.

Bernette 203 How to use rolled hem foot have the one page manual but it...

Sew Inspired Serger Rolled Hem Tips

In case you don't have a manual, you may be able to glean some information here:
Sergers Overlockers
need manual for the Bernina Bernette 203 overlocker

...

Aug 31, 2016 | Bernina Sewing Machines

1 Answer

I need help in good tension for rolled hem in empisal 606D overlocker


Your owner's manual should have instructions for rolled hem settings. My Bernina manual has a the following settings:
Medium weight fabric
80/12 Universal needle
3 cones serger thread
Upper looper 3-5
Lower looper 7-9
Left needle (no thread)
Right needle 3-5
Stitch length 1-1.5
Cutting width 2-3
Differential feed N

Can use woolly thread in the upper looper, but the tension may need to be loosened since the woolly nylon thread will stretch.


Make It Handmade Threading Your Serger or Overlocker

...

Dec 19, 2015 | Sewing Machines

1 Answer

Please give me instructions on changing thread color in the serger


go to the babylock website
go to the downloads
it will bring up a menu
pick manuals--it will take you to another page
click on sergers
the babylock imagine are toward the bottom

I have a Eclipse--they are great sergers

Feb 09, 2012 | Baby Lock Imagine

2 Answers

Left needle on baby lock serger "imagine" skips


Change needles if they have done a few hours. Ales use ballpoint if seaming stretch fabrics. Also you can get EL 705 needles, which have a longer scarf (groove at back) which helps with the loopers catching the needle thread. Or SUK is the stretch type with this longer scarf Also if you are using cheaper thread cones, try a better quality with smoother finish and consistent weight, this will help too. However if this doesn't resolve issue, your looper timing might need adjustment.

Oct 28, 2011 | Baby Lock Imagine

1 Answer

I was doing a rolled hem on flannel baby blankets. My machine stopped and overload notice came up. How long before it will work again?


the rolled hem should only be used for light weight fabrics, if you read the manual it will tell you this..flannel is just too thick a fabric.

Jun 08, 2010 | Husqvarna Huskylock Computerized 936

1 Answer

Juki baby lock EA 605 'rolled hem'


No way to rolled hem, machine as much as 40 years old

Aug 26, 2009 | Sewing Machines

1 Answer

How many foot for Baby lock E5280 like flat, blind, rolled hem?


i dont have a baby lock but on my machine i change from rolled hem to flat needle plate
or change setting to n from r also loosen lower looper tension as rolled hem requires a tight lower looper tension.
hope this helps you
mary h

Jan 05, 2009 | Baby Lock BL1556

2 Answers

Rolled hem on chiffon


Turn under the edge just about 1/4" and do a rolled edge then you can go back and trim off any of the folded under fabric that may show. Also, this keeps the hem from pulling away so easily. You may also try putting some water soluble stabilizer under the fabric before you serge.

Jul 03, 2008 | Baby Lock Eclipse Serger

Not finding what you are looking for?
Sewing Machines Logo

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baby Lock Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

SewTechWayne
SewTechWayne

Level 2 Expert

186 Answers

Custom Exchange
Custom Exchange

Level 3 Expert

397 Answers

Are you a Baby Lock Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...