Question about Projection Televisions

Open Question

My month old LG 60PG70FD plasma TV freezes to a black screen with a "no signal" message. Powering down and up restores it OK. Regards! Graeme

Posted by on

6 Suggested Answers

SOURCE: SAMSUNG PICTURE FREEZE (LOOKS BLACK&WHITE)

got mine working better unplugged the sound and wiggled the plastic coated wire above the large fan works but freezes maybe once in a day some days never have the sound running through the receiver (surround) I shut it off and it comes back on when it does freeze figure loose connection

Posted on Jan 06, 2008

ThaMp3Doctor
  • 8596 Answers

SOURCE: I have an LG 50PC5D

DVD player is stuck in Progressive Scan mode - can happen quite easily. I will need to know the mnaufacturer and model of the dvd player to tell you how to reset it.

Posted on Apr 07, 2008

Bubbabear64
  • 2794 Answers

SOURCE: The short version: Will a

The converter box should work. Getting the remote to work with the TV might be a challenge. You might have to stick with two remotes. It used to be in the old days you could plug your tv power into the remote that way you would turn the tv on with the tuner remote but I be they stop doing that.

There is website that will let you check the digital televison signals for your area. This site should help you:

http://www.tvfool.com/?option=com_wrapper&Itemid=29

Posted on Jun 29, 2008

CA92793
  • 78 Answers

SOURCE: I have had a Hitachi

The signal from the STU to the Hitachi box is going in the wrong direction.
Is the adaptor that you have switchable? If so, flick the switch in the
other direction and this will fix it. If the adaptor is not switchable get
one that is. Then set the STU output to RGB.

Hope this Helps. -CA

Posted on Jul 14, 2008

SIGDOM
  • 17 Answers

SOURCE: tv-- signal strength normal but

When ever the picture freezes intermittendly the problem is usually poor connection on the signal line (antenna or connection on tv) or poor reception. Could be the tuner if the tv has one.To eliminate the tuner possibility try anther tv set if possible.
If you still cannot figure out the problem,let me know what kind of set up you have connected to your tv set.
Do you have a satellite or cable box and if you have splitters.

Posted on Jul 19, 2008

  • 22 Answers

SOURCE: 2 vertical bars on right half-side of screen

you are in luck my friend!  i just performed a fix on a gateway plasma that has LG boards inside.  It is exactly what you are talking about.  Go to the attached link and follow the thread carefully and read it all before starting.  IT WILL WORK!
http://www.avforums.com/forums/plasma-televisions/462873-black-line-fault-hyundai-hpt4240-fixed.html

enjoy!
stephen

Posted on Apr 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My LG - 60" keeps powering on and off. Its only 16 months old.


Loose board problem need for resolder.If your TV is under warranty just forward to LG service center.

Oct 05, 2010 | LG RU-60SZ30 60" Rear Projection...

3 Answers

I have had a Hitachi 42" Plasma screen TV for almost 3 years and recently it has had problems. When you turn it on, the TV only stays on for about 10 minutes, and then the screen goes black with the...


The signal from the STU to the Hitachi box is going in the wrong direction.
Is the adaptor that you have switchable? If so, flick the switch in the
other direction and this will fix it. If the adaptor is not switchable get
one that is. Then set the STU output to RGB.

Hope this Helps. -CA

Jul 14, 2008 | Projection Televisions

1 Answer

Power on tv and I get black screen with sound.


You have lost the input signal...you will have to go to Setup/Net Command and set your input to the one with signal (either a TV input or a Component input). If it is reset...the input likely switched to a non-usable input

Jul 12, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Plasma tv screen goes black once you turn it on. Only sound


I have a panasonic TH-42PX60U plasma TV. When I watch TV programing I have no problems, or with the DVD input. But if I switch to another input, be it video game (PS2) or vcr the screen sometimes goes black and the red power lcd light next to the power switch flashes. Holding the power button in for a few seconds will shut down the tv. Then I can turn it back on and it may operate normally again for a undetermined period of time, before the screen goes black again. This never happened when new. The tv is about 1 year old. Any ideas on this problem? Thanks Ernie

Aug 13, 2008 | Projection Televisions

1 Answer

Tv-- signal strength normal but signal on all channels "blipping" down intermittently causing freezing of picture. Have replaced aerial with high gain antennae together with aerial cable and...


When ever the picture freezes intermittendly the problem is usually poor connection on the signal line (antenna or connection on tv) or poor reception. Could be the tuner if the tv has one.To eliminate the tuner possibility try anther tv set if possible.
If you still cannot figure out the problem,let me know what kind of set up you have connected to your tv set.
Do you have a satellite or cable box and if you have splitters.

Jul 11, 2008 | LG Projection Televisions

1 Answer

I have an LG 50PC5D plasma screen tv. The DVD player has audio but the tv lists the component as NO SIGNAL. It has been working fine for 2 months. I made no changes to any cables or anything. Please...


DVD player is stuck in Progressive Scan mode - can happen quite easily. I will need to know the mnaufacturer and model of the dvd player to tell you how to reset it.

Apr 07, 2008 | Projection Televisions

1 Answer

I don't know how to connect the cables from my VCR & DVD to the LG HD Plasma TV. "No Signal" appears on the screen when I try.


So, does it always say 'No Signal' or does it come up when you get it connected? If they are off when you are connecting them, that sounds okay; you'd get a signal when you turned the DVD player on (and told the TV to pay attention there.)

You might need to get an upconverting DVD or SVHS machine (since those are not normally HD) to get the TV to tolerate the signal, but the TV menus might let you activate that too. Why not look up the HD Plasma TV manual online according to the model number? If it turns out to be a monitor rather than a TV; of course, that is why it would not display those signals...you would need a separate tuner or signal selector box for that.

What's that bumpersticker abbreviation... ROFLMAORTFMYGDSOB? Good luck checking those out, since you get to decide which box renders the SD signal into HD....

Mar 11, 2008 | Projection Televisions

5 Answers

TV doesn't turn on


I bought a LG 39" flat screen 6 months ago. TV has been working great until this morning. Power comes on for about 5 seconds and then cuts off. Have checked all connections and have unplugged from wall to reset, NOTHING!! And a brand new TV!! Any help would be great!

Aug 10, 2007 | LG RU-52SZ51D 52" Rear Projection...

2 Answers

The Picture Freezed on the screen ...


This is the 3rd LG tv to appear to have problems today on this site. If it's only a couple of months old, i don't know about Australia, but in the UK the retailer must replace the set, but after 3 months, you have to get your local LG service centre to collect it, and in past experience, they can't seem to find a fault after holding on to it for weeks and not returning e mails or calls.

Mar 16, 2007 | LG RU-52SZ51D 52" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...