Question about Cyberhome DVR 1600 DVD Recorder
Tips for a great answer:
Sep 04, 2016 | Magnavox DVD & Blu-Ray Players
Aug 11, 2016 | DVD & Blu-Ray Players
Mar 24, 2016 | DVD & Blu-Ray Players
Jan 16, 2016 | Samsung DVD & Blu-Ray Players
Nov 24, 2015 | Samsung DVD & Blu-Ray Players
Dec 20, 2014 | DVD & Blu-Ray Players
Nov 30, 2014 | DVD & Blu-Ray Players
With the DVD/VCR unit on, continue to depress the remote controller's "Code Search" button for about ten seconds, release, & the light on the remote controller should stay on. Continue to tap the remote controller's UP or DOWN channel button ONLY UNTIL the DVD/VCR unit responds. Then, press the power button on the remote controller once the channel has changed. If the DVD/VCR unit shuts off, then press the power button again to turn it back on. If the DVD/VCR unit turns on, then the remote controller has been correctly programmed. Otherwise, repeat this whole process until the remote controller is correctly programmed.
Nov 29, 2014 | DVD & Blu-Ray Players
May 11, 2010 | Coby DVD-224 DVD Player
Jan 02, 2008 | Cyberhome DVR 1600 DVD Recorder
294 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: