Question about Jenn-Air JGR8850 Gas Kitchen Range

1 Answer

Jenn-Air Electric range clock display

The digital display does not work, the display slowly got lighter until it is not longer visable. The timers, oven temp works but no display.
Does it require replaceing the part which I believe is part # 695128 or can a specific part relating to the display only be replaced or repaired. The range is seven years old model SVE47600WC

Betty

Posted by on

  • 1 more comment 
  • dturecki Dec 30, 2008

    I have the same problem, did anyone solve it for you?
    Darren

  • Anonymous Mar 04, 2009

    I have the same problem but when I replaced the clock, the
    touchpaddoesnt work, and the oven light stays on with the cooling fan.
    Ireplaced the oven circuit board in the back, the timer, thethermal
    protector ,the touchpad, checked all the wiring, replaced thefan board
    and it is still broken. Repairs cost over $ 500.00 ITIS STILL BROKEN!
    might as well throw it away! so think before you putalot of money in it
    it is a model SVE47600W

  • Anonymous Apr 07, 2009

    I HAVE THE SAME PROBLEM THE CLOCK DON'T TURN ON AT ALL BUT MAKE SOUNDS

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 19 Answers

The problem is likely bad capacitors on the clock module. I had the same problem on a similar oven and fixed it by replacing the capacitors on the clock module. Find someone who is good with electronics to help you. The parts will be a few dollars at most. See this link for more info: http://www.badcaps.net/forum/showthread.php?t=7902

Posted on Feb 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The display is very dim and it's difficult to see


This is a clock assembly that has gone out on this unit. This is a simple repair and one that you can save a lot of money on by making the repair yourself.

Simply contact us at:

http://www.fixya.com/repair/d499389-accurate_appliance_repair_service
from 7 AM until 7 PM CST and we will get the correct parts out to you asap.
We look forward to working with you and hope to get your range working right again soon.
Thanks, Ella

Jan 20, 2010 | Jenn-Air SCE30600 Slide-In Electric...

1 Answer

The touch pad on my Jenn Air Model JES9800BAF does not work. The clock does not display either. All four burners operate normally.


All burners work fine, clock display is blank, if the oven isn't working either, your display / control board is shorted out

Nov 13, 2009 | Jenn-Air JES9800BA Electric Range

1 Answer

Jenn Air SVE47600b dead touch panel and blower runs constantly


I have had similar problems:
Display was the Part # 71001799 circuit board..$175+labor
Oven blower problem was control relay board, part# 12001689...$224+labor
My solution. replace with non-Jenn Air.
Check Consumer Reports. Jenn Air has high repair history.

Mar 14, 2009 | Jenn-Air SVE47100 Slide-In Electric...

2 Answers

Kitchen range random chatter noise


could be clock motor or fan motor keeps running.

Jan 24, 2009 | Jenn-Air SCE30600 Slide-In Electric...

1 Answer

Clock/oven/temp screen for a Jenn-Air electronic range #SVE87600


I believe Jenn Air will pay a portion or electronic parts replacement on their ranges less than 5 years old.
You might try unplugging the stove for 1 hour and this is supposed to reset the stove to factory settings

Sep 06, 2008 | Kitchen Ranges

1 Answer

Jenn-Air JES9900BAB Electric downdraft range with convection oven


sounds like the power outtage fried the clock. unfortunately, none of today's ovens come with a UPS (uninterruptible power supply), sort of like a power box for your computer. if he power goes out, it'll fry the electronics, including the clock.

have a technician come out and test the clock to see if there is power going to it and what voltage is coming out of it. i would suggest replacing the clock.

Apr 05, 2008 | Jenn-Air JES9860 Electric Kitchen Range

1 Answer

Electronic Display


Further inspection found that the ribbon got damaged during the re-instalation of the clock board. A new front control board had to be ordered and installed.

Feb 23, 2008 | Jenn-Air SVE47100 Slide-In Electric...

1 Answer

Jenn-Air JES9860 burners and oven stopped working problem with display


sounds like you lost power to your stove. if you can't reset the clock, it needs to be replaced. in otherwords, the power outtage shorted out the clock.

have a technician replace it.

Jan 14, 2008 | Jenn-Air JES9860 Electric Kitchen Range

1 Answer

Jenn-air slide in range/convection


its not a loose wire. jenn-air is famous for having to replace the display board. once you replace it it will be fine

Nov 28, 2007 | Jenn-Air SVE47100 Slide-In Electric...

Not finding what you are looking for?
Jenn-Air JGR8850 Gas Kitchen Range Logo

516 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Kitchen Ranges Experts

Mike Carew

Level 3 Expert

958 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Jenn-Air Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...