I have seen a previous post related to a convergence problem on the Mitsubishi projection TV. As of last night, I am having the same problem. I've gone through the menu and adjusted the blue (red and green are fine), but I can't adjust enough to fix the problem.
I saw you mention that you could help somebody with soldering skills and a meter. I have both, so any guidance would be great.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Ok, a long time expert and person who has repaired a lot of these sets.
This set has 3 hidden menus: adjustment (stay out of that one), convergence, and the OPTION MENU----THAT ONE CURES ALL SORTS OF ODD ISSUES--it requires the original Mitsubishi remote and a 4 digit code to enter.
It will if used reset the set to factory in all respects except for convergence which is stored elsewhere.
Seen a number with no sound, no inputs etc that it cures.
Let me know and I will get you a link to the service manual for free if the site has this one(I think they do).
10 minute job and point and click---what likely happened is the micro in the set became confused--happens a lot and reason the Option menu is there.
No,this problems is not the projection lamp problems.The tv now have a problems known as a convergence problems,it dead.The tv colors lines R,G,B mis alignment,have colors shadows pictures or look like 3D pictures.The tv convergence board,the 2 STK convergence ICS and some or all it resistors are dead.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u like 300-350 for parts and labors.
Convergence ICs are STK392-110 you will need two of them they are available at the link I am posting and they give free instalation instructions with pics and free tech support so you can do the repair yourself.Heres the link. http://servicemanuals.vstore.ca/
Convergence amp ic bad http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html http://www.hdtvoice.com/voice/showthread.php?t=28929