Siemens hf36v305 microwave contol panel does not work. Ir keeps doing what ever it wants. Reseting by removing power and plugging in again has very little effect. Control panel fails to work as desired.

Pull the plug for a few seconds . Plug back in . With door closed try reseting clock . ( not recomended unless your a pro isid3 the main control typically behind pcb there is a chematick that will let you do a test on touch panel , pcb, and reseting the display etc.

Microwave Automatic Vent Fan Operation - YouTube

? 2:07
https://www.youtube.com/watch?v=6LoK1geGXbQ
Aug 1, 2011 - Uploaded by GE Appliances
This video explains the operation of the automatic vent fan feature on over the ... We have a Hotpoint Counter ...Missing: siemens ‎hf36v305 ‎01

Microwave vent fan won't turn off - Appliance Repair Forum

Its your Mag tube (what makes the heat) It will be cheaper to replace

keep an eye open on trash nite theyre at the curb all the time. or go to siemens and pay probably 40 bucks

internal short that can damage your control panel but do not try to fix it yourself its got 4000v !!! sorry :( your life worth more then this microwave.

what did you clean it in??? the dish washer???? some times if the plug is removed on an older unit or the power turns off, they just wont start up again,,, its a fult with the micro chips in the computer, the suden surge of power when switshed back on just blows it up,,, iv lost at least 3 in this way
you could try pulling the plug out again but its not very likely to get it working again the real problem is they just dont build in a soft start on them now, so if unpluged then switched back on the computer get a wopping big smack of power that just blows is socks off,, like i sead, i lost 3 evey time the power was cut off they died on me

yes there is a fuse, it is behind the contol panel be sure to un plug

bad control, smart board is bad

I found an HF36V305. Look HERE and see if that's the manuals you want.

Hope that fixed ya up...

Geno