Question about Hitachi 60V710 60" Rear Projection HDTV

1 Answer

Blinking lights we were watching tv and all of a sudden the tv made a popping sound and turned off. We unplugged the tv and plugged back in. The three lights in the front of the tv kept blinking (power, temp and lamp) After a little while only the lamp button keeps blinking. Any answers on what are problem could be. We no longer have any warranty on the tv.

Posted by on

  • fairy9599 Nov 19, 2008

    I havethe same problem, their was a blue stripe down the left side for awhile and then there was a popping noise and then the blue light blinked and then the red temp light and lamp light started blinking? Help we have no warranty, what could it be??

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 40 Answers

Buy this lamp p/n UX21513 but first take out the old check it should be blown by what you say..

Posted on Mar 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What's your problem? won't turn on..... yellow/orange light continually flashes three times...


Toshiba Regza 37in - 37HL17
TV will not turn on - Yellow power ind. Light blinks three times...
Fixed with a firmware update (hard to believe, but true). Search Google for a file named: 2007SEN069.zip (don't worry if the page you find it on doesn't mention the 37HL17 - it worked fine). Unzip the file, and copy the 3 folders and 3 files to the root of a small SD card. The SD card MUST be 2GB or less in size (I used a 1GB card), and it MUST be formatted with FAT-16 (not FAT-32). Mine was pre-formatted as FAT (FAT-16). The SD port is on the back of the TV behind a cover plate near the power cable. You do NOT need to remove the back cover of the TV, just the small cover plate (1 screw). UNPLUG the TV; remove the cover plate; insert the SD card (prepped as explained above); Plug in the TV; Watch the yellow lights blink, then turn blue, then go dark; UNPLUG the TV; remove the SD Card and replace the cover; Plug in the TV; Yellow lights will blink a few times (this is normal); when blinking stops, turn on the TV and you should be good to go. :-)
Pictures attached are from a Toshiba software upgrade bulletin I found online.
09adb97e-8925-4d59-b218-7443a6e64989.png 82ea33aa-2353-4e13-a5db-8be13ba85711.png

Aug 06, 2012 | Toshiba Regza 37HL17 37 in. LCD TV

1 Answer

Watching TV and all of a sudden a loud pop came from the back of the set. Doesn't turn back on after unplugging.


Hello
Check its power supply regulator board. The pop sound you heard may be due to an explosion to any electrolytic capcitors on it. If the line voltage exceeds, this fault will happen. just repalce the damaged component. It is best to replace this board as card basis.

Mar 19, 2012 | Hitachi 50HDA39 50 in. Plasma HDTV

1 Answer

Was watching TV, heard a pop and the screeen went black. Now when I turn it on, the pwoer light blinks green but their is no picture or audio. The light then starts blinking red


Hi,
Is is standby light blinking red or any other light? Let me know how many times red standby light blinking after three seconds long pause to provide you helpful info.
It seems pop sound was due to broken lamp, please check lamp inside tv and if it is broken, replace it to solve tv problem.
Hope this will help.
Thanks.

Mar 09, 2011 | Sony KDS-50A2020 Television

1 Answer

TV INOP


Sounds like you need to replacew the lamp.

Jul 08, 2009 | Televison & Video

1 Answer

Whistle noise? POP? Black out


sounds like the lamp has shattered. check the lamp

May 18, 2008 | Samsung HLN5065W 50" Rear Projection...

1 Answer

RCA TV D52W136D


unplug your set leave unplug for 30 min plug back up any change?...this reset it.. if still not come up may have other issues

Nov 21, 2007 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Blank screen, no sound


If ti blinks three times, then it may be an issue with the flyback transformer. It's called "three strikes"...it tries three times to come on, and after that enters a safety shutdown mode to protect the TV. Might need to have a professional shop take a look at it.

May 02, 2007 | Durabrand DWT1905 TV

Not finding what you are looking for?
Hitachi 60V710 60" Rear Projection HDTV Logo

Related Topics:

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2296 Answers

The Knight
The Knight

Level 3 Expert

72650 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...