Question about Epson Stylus Photo R220 InkJet Printer

4 Answers

Printing in wrong place

After a clean installation on my computer I had to re-enstall the printer.Could`nt find the cd , so I down loaded them from Epson.No probs.Could`nt find the software for `cdprint`anywhere on line, so I installed it of a cd for my old r200.It works except it prints on the very bottom r/h side, well out of the range for adjustment.I also installed it on my Laptop but gets the same results.Pc is running XP and the Laptop is running Vista, both with appropiate printer drivers.Can you Help

Posted by on

  • irvinmr2 Oct 05, 2008

    This is to print onto a cd, not paper.

×

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 435 Answers

Try to install the Easy Print software for your printer. You can download it by clicking on the link below:

http://www.epson.com/

Here, you have to give your email id and click on accept. Then, download it.
This software helps you to correct your printer settings.

Posted on Oct 05, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,035 Answers

Remove the cartridges and power down the printer and then power it on after 10 min insert the cart and print a alignment page form the printer ,please use this link to user manual and follow to print a alignment paper page 50:

http://files.support.epson.com/pdf/r200__/r200__pb.pdf#page=50


Good luck...

Posted on Oct 05, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,614 Answers

Have you try to do a a print head alignment. it is better to do this if you have change ink or re install it again,,,

let me know

Posted on Oct 05, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,894 Answers

Recheck the alignment and then do a check of the paper alignments.

Posted on Oct 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I print onto cd?


Please follow these steps:
1.
Turn your printer on. Most power buttons are located on the top of the printer. Press and hold down the button until its LED light turns green.
2.
Choose the image or text you desire to print onto the CD. On your computer, open the image or text you desire to print. images should be opened by clicking on your computer's "Start" icon and selecting the "Pictures" tab folder within the Start menu. When the Pictures folder opens, click on the image you desire to print onto the CD to enlarge it. If you are planning to print text onto the CD, open the text in Microsoft Word or any other desktop publishing program you may have on your computer.
3.
Insert the CD into the printer. Press the "Eject" button that can be found on your CD printing enabled printer. A CD tray will open automatically. Place the CD into the tray print side up. Close the CD tray. The printer will begin working to detect the CD. Once the CD is detected, your printer's LED light will either flash green or another indication color.
4.
Print the image or text onto the CD. For image printing, click on the enlarged image's tab that will be on your computer's taskbar. You will see a horizontal row of action icons below the image. Click on the thumbnail image of a printer to print the image onto the disc. For text printing, simply click on the "File" action on the navigation menu in your desktop publishing document. Click "Print" within the "File" drop down menu. The image or text will be sent to the printer once you choose the "Print" action.
5 .
Remove the CD from the printing tray. The CD will be fed through the printer during the printing process. Once the process is complete, the CD will come through the bottom of the printing tray. Take the CD from the tray when it reaches the bottom.
The above mentioned steps must help you. In case of any difficulty please revert back.

Apr 08, 2011 | Canon PIXMA iP5300 InkJet Photo Printer

1 Answer

I upgraded to windows 7 w/64 bit computer and down loaded new drivers for my Epson R340 PRINTER. It prints pages alright but when I start to print on a CD a window pops up saying I am missing the driver...


Try looking on the manufacturers website. If this fails.

Uninstall your current drivers

Restart the computer

Re-install the printers software using the original cd ( along with the drivers )

May 20, 2010 | Epson Stylus Photo R340 InkJet Printer

2 Answers

Can not print direct to cd dvd


  1. Find a printer that prints directly on a CD; this is becoming a popular feature and these printers are getting more affordable.
  2. Step 2 Buy some printable media. Printable media is a bit harder to find and a bit more expensive but you need a special surface that will absorb the ink. They will be marketed as "inkjet printable" discs. Look for them online or at your electronics store.
  3. Step 3 Set up your printer for CD-R printing. Chances are your printer can print on paper and CDs, so you'll have to let your printer know what you are up to. In your printer properties, select CD or DVD as your media type. You can do this from the print dialog right before you print.
  4. Step 4 Clean the rollers. You can do this by running a clean sheet of paper through the printer without printing anything. Load up several sheets of paper and press the cancel button to feed it through. Do this a couple times.
  5. Step 5 Pull out the tray. This may be a separate part of your printer or built-in. Read the manual and learn how to pull it out properly before you go yanking at random and breaking things.
  6. Step 6 Place the CD in the tray. Make sure there is no dust or paper scraps on the tray and place the CD on the tray so it lies flat and the printable side is facing up. For smaller CDs, place the adapter first and then put the CD down.
  7. Step 7 Insert the CD tray into the printer. If the tray was attached to the printer, put it back where it came from. For separate trays you may need to wait until you are ready to print and load it into the manual feed.
  8. Step 8 Design your label. Your printer will have come with label designing software. Take some time. Make it pretty.
  9. Step 9 Print. Double check your print settings and print directly onto your CD. Choose "File" then "Print" and click "Okay." If you are loading manually, now is the time. Manual loading slots are usually on the back.
  10. Step 10 Allow your CD to dry. It is recommended to let it sit for 24 hours. There is a lot of ink on there and you do not want to ruin it with smudges.

May 10, 2010 | HP Photosmart Premium C309A All-In-One...

1 Answer

My lexmark keeps displaying wrong cartridge on right side and it's the right one anybody have an idea whats wrong


Hi, it might be the cartridges are not seated well in the carrier or just needs cleaning. Try this if it helps. Remove the cartridges from the printer. Close the cover. Unplug the printer from the power source for now. Grab a damp paper towel and place it on the table. Have one cartridge and set it on the towel with the nozzle facing down. Draw about 2-3 lines in one direction to wipe clean the nozzles. Do the same to the other cartridge. Plug the power for the printer. When printer's ready, load the cartridges back in. Let it print the alignment page. After printing, check if problem persists. Hope this resolves the problem. Good luck!

Mar 16, 2010 | Lexmark X7170 All-In-One InkJet Printer

1 Answer

Brother printer HL-2070N Stopped printing. Toner light stays on. Installed replacment toner cartridge. Rocked side to side to spread toner evenly. Cleaned the primary corona wire. Light still on. Will not...


go to the start of your computer and find the control panel and when you see the ad and remove program click it and and you see the currently install files find words brother printer HL. click it and remove after that please restart your computer din insert your brother printer installer cd into cdrm and install again maybe your current printer driver some files is missing, or reformat your pc using os/operating system and install the printer again make sure your printer have a load tuner or ink. thank you

Jul 03, 2009 | Office Equipment & Supplies

1 Answer

Lexmark 2600 not printing


I recently had the same problem. Your Lexmark printer has automatically placed itself on pause. You must go to the control panel and unpause it from there. Its' simple, just go to control panel and select printer and faxes. Select your Lexmark printer and right click it. Then select resume from the drop down menu. Your printer is now unpaused and ready to print!

Dec 15, 2008 | Lexmark All-in-One Printer with PictBridge

2 Answers

Canon MP810-CD-R Tray loading-printing problem


I read on another site that you must wait until prompted on the screen to put the tray into position. Opening the inner door and loading the tray before asked to and then pressing OK was the key to fixing the problem on the MP830. 
It's the simple things that always get you into trouble, I guess.

Oct 02, 2008 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

Epson stylus r1800 problem with printing on cd/dvd


Try this :

Disconnect the printer from the computer.
Turn it off & make sure the CD/DVD tray is closed then turn it back on.

***

Here's generic instruction for you:

If you are receiving an error pertaining to the CD TRAY NOT BEING INSERTED CORRECTLY, please do the following:

Recommendations:
-Don't force the CD/DVD tray into the printer.
-Make sure your printer is powered on, and the output tray is in the upper position.
-Please ensure there is at least 3 inches of space behind the printer, or the CD tray may eject.

Included, are the correct CD/DVD loading instructions. Please follow the instructions below:

CD/DVD LOADING:
1. Ensure the printer is powered on. Remove any paper from the sheet feeder.
2. Push in the paper support extension on the printer, and close the paper support.
3. Push in the output tray extensions, but leave the tray open.
4. Lift the output tray. Place one hand on the top of the printer, and pull up on the output tray until it stops. Lay the tray down in the upper position.
5. Place the CD or DVD into the CD TRAY with the white (or printable) side facing up. Note: To print on small 8cm CDs, please place the small CD ring on the tray first, then place the CD inside the ring.
6. Slide the tray into the tray guides located in the output tray. Push in the guide until the arrow on the tray matches up to the arrow on the tray guide.
7. Press the PAPER button to load the CD/DVD into the printing position. The CD is correctly loaded when the printer's POWER button stops flashing.

General tips for CD and DVD printing:
-Burn data/video/images onto CDs or DVDs before attempting to print on them.
-Do not use thermal-printable or regular CDs or DVDs in the printer.
-Moisture or fingerprints on the printable surface of the CD may cause marks or smearing to appear after printing.
-All printable inkjet media is different. Some surfaces will absorb ink better than others. If output appears banded, faded, or streaky, print a Nozzle Check pattern to confirm that all colors of ink are printing completely. If the ink does not completely dry or smears after 24 hours curing time, you may need to use the Epson Print CD tools to adjust (lower) the print density.
-The only supported resolution for CD/DVD printing is 1440 dpi (aka "Photo")
-Borderless printing and printing on the "inner circle" (plastic around central hole) of CDs is not supported.
-Do not use the "print preview" feature provided by the Epson printer driver as it will only show the image on a blank field and does not offer a clear indicator of where the image will print.
-The Epson Print CD software works best with JPG images and may not import some TIFF images.

Sep 26, 2008 | Epson Stylus Photo R1800 InkJet Printer

2 Answers

Help


Lexmark.com has drivers for all their printers.

Jun 14, 2008 | Lexmark X63 InkJet Printer

1 Answer

Grey & Black Printing on everything


Hi,
it appears that the printhead has a problem. try cleaning the printhead, via software. usually in printer prefs. also try running a few test pages. to see if you have any colours at all. if it,s only printing in grey scale. i.e grey-black. check the colour cartridges ink has,nt run out or blocked the nozzles.
Hope this helps Mike@Compurepair.

Feb 20, 2008 | HP DeskJet 9800 InkJet Printer

Not finding what you are looking for?
Epson Stylus Photo R220 InkJet Printer Logo

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Michel Smith

Level 3 Expert

1218 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...