Question about Apple (661-1220) Motherboard

1 Answer

Imac mother board connection to hard drive

I have a imac g5 and tried to replace the hard drive that was showing defective , to find that the connection was coming apart from the mother board, can I get this mother board and is it all just plug in connections.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 116 Answers

Ask an apple technition

Posted on Jan 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

A885GM-A2 new mother board will not boot up screen


You are missing the driver for the monitor. It should have come up but sometimes all the drivers are not or do not activate. If you have a disc for it run it and try to activate the monitor. It could also be the type of hook up you have. Make sure the cable is connected in the right port and that it compatible with your monitor. Might try the user friendly controls on the monitor. Make sure the contrast or black and white settings are not blacking the monitor out. Then there is always the possibility that you have a bad MB. Everything can work and it have a bad monitor driver as a matter of fact I have seen a lot of new and especially refurbished boards that were missing drivers. Also if you have the disc for the monitor you may have to run it again and it should program itself to the MB. Sometimes that has to be done. I have two monitors an Acer and a Dell and every time I have a hard drive go out I have to reprogram the Dell monitor. Try these things and let me know what results you get.
Later-

z

Mar 17, 2014 | EliteGroup ECS A885GM-A2 (V1.1) AM3 AMD...

1 Answer

Unable to copy in pen drive from pc


try to connect other device on the same port. if it is working then your pen drive is defective. if any of the usb port is not working then u need to replace the mother board. if other device is not working on the same port then u need to replace the USB port.

Sep 13, 2011 | Motherboards

1 Answer

My mother board gigabit 61pme s2p series mother board.with amd althon 3ghz processor.the problem is when i connect the usb pendrive to back of the usb port...if i send data 1 or 2gb data to pen drive.the...


your problem is kind of complicated. Check if you have a defective usb flash drive or an usb connector by doing so:
  1. Try other usb flash drive. If it solves the problem you have a defective flash drive
  2. Try to plug in to other usb port. Observe each port. If you see that you have a problem with your usb ports, buy a new usb port card

Aug 01, 2011 | Intel Motherboard

1 Answer

It keeps saying operating systme not found


it appear because of a defective hard disk drive or a defective operating system or maybe a defective IDE cable the one who connects the hard disk drive through the main board. try to replace a new IDE cable. then if it still have the problem try to reformat the hard disk drive with a new operating system(windows xp etc..)if still the problem occurs try to replace the hard disk drive.. may this one helps you

Jul 25, 2011 | Texas Instruments Motherboards

2 Answers

Was workin ok but no signal imput now


One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect your hard drive

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your ((motherboard to your hard drive)) make sure they have a secure connection and are not faulty or just replace them there probably old and faulty
make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electic extensions or just replace them they are probably faulty a computer needs its connections to have an end so any faulty leads will end up with a computer error hope this helps

Mar 29, 2011 | Asrock K7VT2 Motherboard

2 Answers

Hard disk not detecting


It is very likely that your motherboard is not capable of handling large HDDs. Too bad, friend. Use a smaller one, or may be two of them.

Sep 08, 2009 | Asrock K8Upgrade-VM800 Motherboard

1 Answer

Imac G5


Check the Memory9RAM) on your computer.

Jul 24, 2009 | Apple (661-2795) for iMac Motherboard

1 Answer

Will not boot,bios does not show a hard drive,only two CD drives


The peripheral devices as Hard disk and cdrom is not connected with the IDE cable or has loose contace. Even power cable of devices is not properly done or left out. So you need to check the IO IDE cable connetions and the power cable connections of the devices being connected to the mother board.

Mar 30, 2009 | Intel D865GBF Motherboard

1 Answer

Motherboard installation guide for IMAC


You may want to try:
http://www.fixya.com/support/t1828507-motherboard_installation_guide_imac

Also there is other versions that have a slightly different layout, but essentially the procedure is the same with all G5 models.

I will C if there are better DIY Manuals.

Mar 20, 2009 | Apple (661-2795) for iMac Motherboard

4 Answers

17" iMac quit working



Your Imac may be one of those affected by Apples purchase of inferior capacitators from Taiwan. If you are less than 3 years from the purchase date, apple will repair the problem for you for free. Just take the unit to your nearest local Apple Genius or tech. If you are outside of the repair extension guidelines, I have provided a link here which can show you or someone more skilled how to repair the problem. Ordering a new motherboard and power supply will set you back a lot of money, however the following guide and pdf give you step by step instructions on how to ressurrect your dead imac without speding more than $100.00. I was able to repair my imac using this guide and it was worth it to save a $2k computer that was only 3 1/2 years old. Check it out:

the following information (in italics and bold)  is taken directly from: http://www.jimwarholic.com/2008/07/how-to-repair-apple-imac-g5.php.  (this site is complete with instructions, manual and the full compliment of materials available at an extremely affordable and fair price. I took a chance and repaired my own, it is not as hard as it sounds1)

The iMac G5 Repair Extension Program for Video and Power Issues applies to first generation iMac G5 computers that have video or power-related issues as a result of a specific component failure. If your iMac G5 is exhibiting any of the symptoms listed below and your computer's serial number is within the noted ranges, your computer may be eligible for repair, free of charge. If Apple or an Apple Authorized Service Provider (AASP) determines that your iMac G5 computer is eligible as part of the program, the repair will be covered by Apple for up to three years from the original date of purchase even if your iMac G5 is out of warranty.

This is a worldwide Apple program.
Affected systems will exhibit one of the following video- or power-related symptoms:
Scrambled or distorted video 
No video 
No power 
Note: If your iMac G5 is not experiencing any of these symptoms, you do not have to contact Apple or any Apple Authorized Service Provider.

Which iMac G5 computers are affected by the iMac G5 Repair Extension Program for Video and Power Issues? 
The program is available for certain first generation iMac G5 models that were sold between approximately September 2004 and June 2005 featuring 17- and 20-inch displays with 1.6GHz and 1.8GHz G5 processors.

The affected iMac G5 computers have serial numbers where the first 5 digits fall into the ranges noted below.

Serial Number ranges:
W8435xxxxxx - W8522xxxxxx 
QP435xxxxxx - QP522xxxxxx 
CK435xxxxxx - CK522xxxxxx 
YD435xxxxxx - YD522xxxxxx 
Some second generation iMac G5 computers have serial numbers that fall within the upper band of the ranges listed below. Only first generation iMac G5 computers are affected by this program.


Where do I find the serial number of my iMac G5?
The 11-digit serial number is located on a label under the foot of the iMac G5. There is a bar code underneath the serial number.
To view the label, hold the sides of the iMac and gently lay the computer face down on a soft, clean towel or cloth.



Is the iMac G5 Repair Extension program available for other Apple computers? 


This program applies only to the systems noted in this FAQ. Other versions of the iMac G5 line are not part of this program. Click here for more information on how to identify iMac G5 models

Free guide for how to repair the motherboard capacitors, rescue the hard drive and more.

http://www.jimwarholic.com/docs/Repairing-Apple-iMac-G5-Motherboard.pdf

Feb 22, 2009 | Apple (661-2795) for iMac Motherboard

Not finding what you are looking for?
Motherboards Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apple Motherboards Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Brad Brown

Level 3 Expert

13530 Answers

Are you an Apple Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...