Question about Mitsubishi WS-55511 55" Rear Projection Television

2 Answers

Sharp LC-32DA5U When you turn the tv on there is no picture. The green power light comes on then starts flashing back and forth with the opc light. Then, if you wait long enough there is a very loud pop that comes from the lower left side of the set. The tv will not turn off and I have to unplug it. Any ideas, It is pretty scary. The first time this happened I pulled the plug and the tv came back on. That was a few months ago. Now, no picture at all and I am afraid to plug it in. Any ideas?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It is not a Mitsubishi Rear Projection TV, It is a Sharp LC-32DA5U. Liquid Crystal Flat Screen.

Posted on Oct 06, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,146 Answers

Sounds like youve had a pic tube go out,,probly just one and the other 2 are still good,,thats why it came bck on,,take it to a tv shop ,know ,,want be that much if its just one pic tube,,good luck

Posted on Oct 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I turn on the main power switch of my LCDTV #LC-22SV6U and the pwer indicator (RED) flashes. I cannot get the remote control to turn the indicator to green and give us a picture.


IT SEEMS LIKE THERE IS A FAULT WITH THE POER SUPPLY IN SIDE THE TV IS THERE ANY AMOUNT OF FLASHES OR ANY CODES ITS SENDING OUT?

WHAT BRAND OF TV IS IT?


Sep 25, 2008 | Sharp Projection Televisions

1 Answer

Power and OPC blinks, TV will not change Input modes


Try removing set and or a box if used from power for several minutes.

Dec 23, 2012 | Sharp LC-46SB54U LCD TV 46 inch Class,...

2 Answers

I HAVE THE SHARPTV MODEL LC-46D64U PROLEM WHEN I TURN ON TV , THE TV IS NOT ON AND ONLY POWER LED AND OPC LED ARE FLASHING WHAT PARTS ARE BAD THANKS FOR YOUR HELP


Your TV has defaulted to "protect mode", the micro-processor has detected a failure within the circuitry that would be damaging if the processor allowed the TV to power up, unfortunantly the TV will have to be serviced by an authorized Sharp servicer. I would recommend calling 1-800-BESHARP and talk with them about your TV problem, who knows they may compensate you in some way. Good luck !

Jan 08, 2010 | Projection Televisions

1 Answer

While watching tv it just turned off, we turned it back on but no pictures but there is volume. also to turn it back on we see red light and green light together flashing then it turns off. i just replaced...


MY TV TURNS OFF AFTER WE TURN IT ON IT GOES BACK OFF A FEW TIMES AND THEN STAYS ON. AND WHEN I COME HOME FROM WORK IT STARTS ALL OVER AGAIN, THAT HAPPENED FOR 2 WKS NOW IT JUST GOES OFF YOU ONLY SEE THE GREEN LIGHT ON THE FRONT COME ON(POWER LIGHT) AND IT GOES RIGHT BACK OFF IT WILL NOT STAY ON

Sep 18, 2009 | Toshiba Projection Televisions

1 Answer

New Sharp Aquos LC37X20E. After 30 mins turns itself off to standby and comes back on after 2-5mins (even though the automatic return to stanby has been set to "disable"). Eventually after...


According to Sharp it is a software problem. Engineer came, installed software update ,10 minute job.....TV worked fine for 1/2 day unfortunately: Then images turned black and white in all channels TV turned itself off, and stanby and OPC buttons started flashing. When TV came back on its own 10 mins later , screen had 2 large square staines superimposed in image (as if it was a burnt screen)...Engineer will be back next week...all quite sad really for a new TV.....will keep u posted

Jul 03, 2008 | Sharp Projection Televisions

1 Answer

My Sharp Aquos TV turns itself on and off. There is no picture most of the time, and the audio comes on briefly. The power light and the OPC light flash simultaneously at times. The remote only works...


The Sharp people told us they have had 35 complaints in my area about the Cable company signal (Cablevision) screwing up these t.v.s. Seems the digital channel settings are not compatible with the signal. I tried to confirm this with the cable company and they have no plans to fix anything on their side. If I unhook and re-hook the cable, the t.v. seems to work again. This is annoying because it happens on ABC where my favorite shows are!

Mar 14, 2008 | Projection Televisions

3 Answers

Tv wont power up makes a noise but no picture


Your power transformer is likely shot. It'll cost at least $200 to have it replaced. Someone can come to your house to diagnose it. Usually costs around $65.

Nov 03, 2007 | JVC AV-56WP74 56" Rear Projection...

Not finding what you are looking for?
Mitsubishi WS-55511 55" Rear Projection Television Logo

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68197 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...