Question about Printers & Copiers

1 Answer

Dear Sir Plz Help Me Plz.

Sir I have Konica Minolta Bizhub C252 and i am very confuz.
I have setup for DHCP and Auto IP after that netwok option gone from administrtor settings.
Sir How can i get back network option no. 5 so i can add manual ip address for my printer plz help me.......I will be very thank full to you.....

Posted by on

  • Mr-Jas Oct 08, 2008

    Sir Thanks for your help but i have still same problem i am sending you details about.



    TCP/IP


    • TCP/IP = Enable

    • IP Address = 169.254.173.68

    • Subnet Mask = 255.255.0.0

    Netware = Disable



    Raw Port No.



    Port 0 = 9100

    ....

    ....

    port 5 = 9116



    pc is connected with printer with cross over cable



    i have setup pc ip 169.254.173.67 and subnet mask 255.255.0.0



    then try to scan ip and open printer ip in mozila fire fox same problem



    Sir kindly request to you plz help me and gave me a good solution I will be very thankfull to you.



    Is that possible somting could be burn inside after chainging the Network settings.

    Thanks. waiting.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 146 Answers

If the button on the touch screen is not visible for the network settings in the administrator settings there is definately something going on. Try connectng to the web interface by typing the current IP address of the copier into the address bar in Internet Explorer. If you do not know the IP address that was assigned to it then Google for Angry IP Scanner, download, and install it. Let it scan your network and find the IP address that way. If you have the right IP address nd cannot access the IP then try it in Mozilla Firefox. You PC must be in the same IP range for any of this to work.

Once you get into the web interface you need to hit LOGOUT as you are in public mode. Then log back in as administrator. The default password is 00000000 or more likely, 12345678. YOU MUST LOG OUT OF ADMIN MODE. DO NOT JUST CLOSE THE BROWSER WINDOW. This will lock up the control panel and cause problems.

You can change the IP address from the web interface in admin mode.

If none of this works then contact me and I will go further. Hope this helps.

Posted on Oct 05, 2008

  • wimpie266 Nov 30, 2010

    Hi Sir, i am having the same problem and tried mozilla, but it didn't work, what else can i do?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Konica Minolta BizHub C252 - pale colors on the long side


Konica Minolta BizHub C252 Repair Questions,... - Fixya

www.fixya.com > Forum > Printers & Copiers > Konica Minolta
Konica Minolta BizHub C252 - pale colors on the long side · Konica Minolta. ... I have a Konica C250 machine which cannot print red color at all. I had changed ...

Konica Questions answered here ' FixYourOwnPrinter

www.fixyourownprinter.com/posts/40820
Aug 22, 2008 - On the right hand side of the drum (the part that has the large green handle) that easily slides out. There is a ..... I have konica minolta bizhub c252 colour printer. ... The K light came on a long time ago and is constant on now.

How to clean the drums/i units on the konica minolta number ...

? 0:28
https://www.youtube.com/watch?v=eD8HdNq0MlE
Nov 23, 2011 - Uploaded by Tennants Nottingham
How to clean the drums/i units on the konica minolta number plate printer ... Fix or repair color laser printer with fading, lightprint, or lines samsung clp 300 ... Imaging Unit Reset for Konica Minolta Bizhub C203 / C253 / C353

Dec 14, 2015 | Konica Minolta BizHub C252

1 Answer

Need to replace imaging unit . konica c252


http://www.precisionroller.com/imaging-units-for-konica-minolta-bizhub-c252/products.html

push down, slide out, pull tapes and fixtures off new unit(s) and replace. These IU's have chips in them to keep track of life. Another option instead of replacing the unit is to buy just the chip and replace it on the old image unit. This depends on the condition of the existing unit(s).

Jan 07, 2015 | Konica Minolta BizHub C252

1 Answer

Error c252


no such code for bizhub c252

Apr 01, 2014 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Need to disable dhcp on a konica minolta bizhub


1-Press "Utility/counter" button on basic panel of your printer.
2-Press "Administrator settings"
3-Press "Admin-2"
4-Press "Network Settings"
5-Press "IP settings"
6-From this menu you can disable/enable network settings.DNS Settings, DHCP, Auto, manual, etc all network settings are in this menu

Jun 01, 2012 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

Konica Minolta Bizhub c252 network problem


firqst: DHCP disabled
copier IP adress should be 192.168.x.y
IP Pc must be 192.168.x .z (169.254.xx.xxx is a bad address!! = No-IP address !!)
see my recommendation for the scan on a previous post (http://www.fixya.com/support/t1395654-konica_c252_scanning_address_book_job)

Oct 09, 2008 | Konica Minolta bizhub 250 All-In-One Laser...

3 Answers

Konica minolta bizhub C252 printer Problem


Is anyone else having problems getting Konica to stand behind its products.  

Dec 04, 2007 | Konica Minolta bizhub C250 All-In-One...

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

475 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96576 Answers

old marine
old marine

Level 3 Expert

1472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...