Question about Printers & Copiers

2 Answers

Printer (psc 2200) does not print. It tries to do an alignment, alignment is cancelled. asks that one press enter for alignment and keeps looping.

Posted by on

  • 1 more comment 
  • carscot Oct 04, 2008

    when will you answer my question. I have an HP psc 2200 all-in-one printer. It is looping when it tries to do an alignment and it does not go beyond the "press enter for alignment" before I added the new cartridges and I sent a page to print the page would exit the printer blank.

  • carscot Oct 04, 2008

    I will try reinstalling but if that does not work can i resubmit the problem?

  • carscot Oct 05, 2008

    yes, I uninstalled and reinstalled and the printer is working..Thanks for your valuable help.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,550 Answers

To bypass the cartridge alignment problem
Try the following

  • Press and hold the Setup button.
  • Press the Options button. The printer should be ready to print.

Thanks for using Fixya

SAM ANDERSON

Posted on Oct 04, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Printers & C... Master
  • 6,487 Answers

This can be a software problem on your printer , you have tried uninstalling and reinstalling the printer on your computer if not yet try doing that and hopefully that will fix the problem..

Hope that helps...........

Posted on Oct 04, 2008

  • Mark Gil
    Mark Gil Oct 04, 2008

    Yes, you can contact us bac here and post again your concern or just a comment...



    Thank you for using FIXYA..

  • Mark Gil
    Mark Gil Oct 05, 2008

    NO problem glad to help with your concern....

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My hp psc 2175 all-in-one keeps giving me the message "press enter to align cartridges." When I do that it says" printing align cartrigdes page" then it says "alignment cancelled" and then goes back t


Hello Dear; When you install new cartridge the machine going to alignment it is neccessary you just follow the direction step by step to finished the procedure.

Apr 28, 2009 | HP PSC 2175 All-In-One InkJet Printer

1 Answer

Cartridge alignment


Put a teeny tiny bit of oil (3 in one on fingertip) all over the slide (chrome bar that you see looking into the printer from the front) and retry. Just a thin film, NOT enough to drip.

The self test and align 'scan and print' procedure is timing out.

Mar 27, 2009 | HP PSC 2175 All-In-One InkJet Printer

1 Answer

"Press enter to align cartridges"


Try removing the ink cartridges and cleaning the electrical both on the ink and iside the unit with some rubbing alcohol and qtip then reseat them back into the unit and see if that works

Feb 21, 2009 | HP PSC 2210 All-In-One InkJet Printer

1 Answer

Keep getting message Press Enter to Align Cartridges


after each alignment you press enter key or start key not cancel key,

Dec 12, 2008 | HP PSC 2175 All-In-One InkJet Printer

1 Answer

Printer Issues


my hp psc 2210 after putting in new cartridge keeps saying press enter to align cartridge. it keeps repeating the same reading.

Apr 08, 2008 | HP PSC 2210 All-In-One InkJet Printer

2 Answers

Aligning printer after new ink cartridge inserted


SOLUTION: Start the cartridge alignment by performing a series of button presses from the front panel of the product.
  • HP PSC 1200 and 1300 series:
    1. Turn on the HP PSC 1200 or 1300 series product.
    2. Disconnect the USB cable from the all-in-one.
    3. Press the sequence of front panel buttons below to start the print cartridge alignment process. The button-press sequence must be completed within ten seconds. It might take several tries to complete the sequence within ten seconds.
      1. Press and hold Cancel .
      2. While holding Cancel , press On .
      3. When the Check Paper and Check Print Cartridge lights begin to blink simultaneously, release both buttons.
      4. Press Cancel again.
      5. Press Copies .
      6. Press Paper Type .
      7. Press Color Start Copy . The alignment page will begin printing. If the alignment page does not print, repeat the button-press sequence in this step.
    4. When the alignment page has printed, place the page face down on the scanner glass and press Scan . The alignment is complete when the On light stops blinking.
    5. Reconnect the USB cable.
CAUSE: This can occur if the cartridge alignment is canceled or times out without a valid print cartridge alignment stored in memory.

Oct 29, 2007 | HP PSC 1350v All-In-One InkJet Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96396 Answers

old marine
old marine

Level 3 Expert

1461 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...