F906 is blown

Tries pushes the power switch on the remote few times,each times push wait like a 1 mins or 2 mins for the tv Tuner signal board to take it effect.This process should get ur tv picture back,because the tv Tuner signal board it is old and having problems,evenually require replacement of a refurbish tv Tuner signal board.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish tv Tuner signal board for the replacement.

you have a looseconnections on the boards.

Hitachi Ultravision power light on but on picture

Hello dhack56,

Can you post a picture of the screen as the TV is playing, this way I can see if the picture is fuzzy, or if the images are split, all of which classify as not a clear picture. A picture of the screen will help with the diagnosis.

Thank you,

Shuttle83

Good Day, papamotts;
Won't turn check Q912, Q914 & I901. No relay click check Q003. Good Luck, big IRISH.

Good Day;
Try this:

Symptom: All Front LED indicators are flashing in sequence: Power-->Temp-->Lamp-->Power......continuously
Cause: Replace Lamp . This symptom may happen all the time or it may be intermittent. It is normal if it occurrs from time to time, See OG under TV Front Indicators explanation notes.
Good Luck, big IRISH.

Good day, 1gary;

Hitachi has LED’s, green ‘lights’ and a red light to determine what circuit may be the problem; after removing the back of TV, bottom only, plug TV back in and observe which LED’s come on …..BUT most important which LED’s don’t come on; locate and note number, EG; DP37 and etc.

Good luck, big IRISH. Ps let me know.

does the led on the front of the set light up? Is 50UX26B the right model number of your set?

10 years is about life for these, booming noise like a gun shoot?
i would suspect a cap blew up can you open the back and see any burn marks or paper ?

http://en.allexperts.com/q/TV-VCR-Stereo-1749/Hitachi-big-screen-tv.htm