Question about Jet 3 Ultra Power Chair

10 Answers

Controller Problem Have a Jet 3 Power wheel chair with a wobble stick control box Its got funny actions of dying down and sometimes cutting out and it needs a possible new control box on it?

Posted by on

  • 1 more comment 
  • gordon_luce Oct 04, 2008

    I would use a good used control Box which would work just as well as brand new one if one could be found as it only plugs into the back and fastens with some screws on the bottom side of the arm





  • gordon_luce Oct 04, 2008

    Its got a new Battery and brand new Charger in the requested Help wanted for a solution to the power wheel chair solution

    so far your answers have not solved the problem

  • gordon_luce Oct 08, 2008

    I ALREADY KNOW ALL ANSWERS GIVEN
    I DO NOT FEEL JUSTIFIED TO SAY THEY SATISFIED MY REQUEST AND

    THAT I WISH TO DISCONTINUE FURTHER SUGGESTIVE AND TO PLEASE CLOSE ANY FURTHER OFFERS MADE

    THANKING YOU EVER SO MUCH FOR YOUR
    SUGGESTIVE ATTEMPTS ANYWAY ....

×

10 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Before you change to new control box, try to go to power chair service garage who have PP1 a programmable controller. So they can find a trouble code that occur on your controller.

Regards,
mas Didiet

Posted on Nov 13, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer



10-25-08

I have a Jet 3 Ultra power chair. It stopped going and I decided to see if the bgatteries were in good shape. one of them showed apox. 13 volts, but the rear one only aprox. 6 volts. Looking at the charger meter I did not see any signal of a charge with the chair connected to the 127; volts at the wall. The only thing that works, faintly, is the whistle and the control lights.

Any ideas? Thanks

Posted on Oct 26, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

Please click this link and check out what you want

http://www.medicalmobility.net/products.html

also check out this link

https://www.idaho.at4all.com/welcome.aspx


Posted on Oct 08, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,879 Answers

Read the information provided by ginko :
Comment by ginko, posted on Oct 04, 2008 Call (800) 794-9813 or (800) 790-4792 and enquiry about the price for a replacement control box. They answer Mon.Fri at eastern daylight time.
replace the wobble stick.

Posted on Oct 04, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,614 Answers

  1. Make sure the batteries are wired properly—refer to the battery wiring diagram located on the power base.
  2. Make sure the connections on the battery terminals are tight and secure.
  3. Make sure the main circuit breaker has not tripped—push in the main circuit breaker reset button.
  4. Make sure the controller is completely connected to the power base.

Posted on Oct 04, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 479 Answers

U can buy the new controller box or the required supplies from the link below:

http://www.usmedicalsupplies.com/Jet-3-Ultra-Electric-Wheelchair.htm

thanks

Posted on Oct 04, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 200 Answers

HI

U can get the control box from the company itself that is best for u..

For more detail see the user manual..

Thank you ..

Posted on Oct 04, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

You can order replacement parts here:
Jet 3 Ultra Power Wheelchair from US Medical Supplies
Contact them by phone for price and availability if parts are not listed on website.

If this seller does not have the part, let me know, I will give you more contacts.

Posted on Oct 04, 2008

  • Ginko
    Ginko Oct 04, 2008

    Call (800) 794-9813 or (800) 790-4792 and enquiry about the price for a replacement control box. They answer Mon.Fri at eastern daylight time.

  • Ginko
    Ginko Oct 04, 2008

    If the joystick is defective, it means that the contacts on the joystic board are gone, it is not worth repairing, replace the whole part.
    The seller that I posted at (800) 794-9813 should have the replacement control, and probably at less than factory price, however you can also give a call to pride mobility, and ask a replacement control from them. Here is the number 1.800.800.8586 , and the web page.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,550 Answers

I think manual will be helpful and provide you all details .

Posted on Oct 04, 2008

  • SAM ANDERSON Oct 04, 2008

    You also need to check fuse .

    There is also chance of fuse being blown .


×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Have you checked the battery first to see if that could be the issue?

Posted on Oct 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the fix for Pride power chair code 3101 bridge voltage fault?


The fix for this fault is to replace the chip in the VSI controller. This happens when you consistently drive the power chair with weak or low voltage batteries.

Sep 02, 2014 | Pride Mobility Products New Pride Mobility...

1 Answer

How do you increase the speed in Jet3 power chair


I take it you are talking about increasing the maximum speed beyond the maximum the chair is set for now! the max listed speed for the jet 3 is 4mps, so if your chair is doing that there is only changing a load of hardware to increase speed past that (it is very costly) if your chair is second hand it may be that the chairs programming has been changed to reduce the max speed say for in-door use or for elderly with slow reactions to better control the chair, if that is the case it depends on the controller you have it would need a programmer box, you can buy these on ebay and the like or you could take it to a mobility shop and see if they will change it, a lot of these shops will offer to do it free to try and get your future custom, it only takes a couple of mins, most will just plug in to the charge / data port on the controller, select from the menu and adjust the speed etc. hope that helps.

Jul 09, 2014 | Jet 3 Ultra Power Chair

1 Answer

Joystick error code 7 flashing lights, 3green 3orange 1red


Check and see if the charger is still plugged in when you have this fault. Usually a 7 light flash is a controller fault. Sometimes it will also mean you have one or both motors disengaged. If the charger is not plugged in when you have this fault then try and push the chair. If it moves freely then you need to engage the motors. If you have to engage the motors you will have to power down the chair and power it back up to clear the fault. If this does not work you will need to contact a technician to troubleshoot the root cause.

Apr 05, 2014 | Pride Mobility Products New Pride Mobility...

1 Answer

Shoprider power chair won't move and 8 Battery LED Lights are flashing


Code 8: Controller problem. Also, check to see if your gearbox levers are engaged - if you can roll the chair by hand the gearbox is not engaging the motors.

Mar 20, 2013 | Pride Mobility Products New Pride Mobility...

1 Answer

When I turn on controller power the speed lights flash slowly. Joystick does nothing and chair is dead. Chair is Pride Jet 3 Ultra.


Do all of the speed lights flash at the same time or do they ripple from left to right? If they ripple from left to right the chair is in lock mode and you can use the unlock procedures from my tips to unlock. If they are all flashing at the same time you have an internal joystick problem and the joystick needs to be replaced Hope this helps

Apr 27, 2011 | Pride Mobility Products New Pride Mobility...

1 Answer

Controller got wet and now the speed lights flash on and off


Controller getting wet does not help Sorry but you will have to replace the controller

Mar 21, 2011 | Pride Mobility Products New Pride Mobility...

1 Answer

Hello , The Lights where the control stick is ( Battery meter ) keep going up and down at a fast pace the chair has been charged , but will not move . any suggestions?


It sounds like you may have to reset or unlock the controller system. Take a look at this website to find the model of controller for your power chair, then consult your owner's manual for reset and/or unlock procedures.
http://www.pgdt.com/scenter/diagnostics/diagvsi.html
You can also call Pride Mobility at 800-800-8586 for troubleshooting assistance over the phone.
Good luck!

Oct 13, 2010 | Jet 3 Ultra Power Chair

3 Answers

Lights just flash on controller and wont move jet 3 wheel chair


Do they flash in series? Like ten flashes then a pause then ten flashes?

Mar 27, 2009 | Pride Mobility Products New Pride Mobility...

Not finding what you are looking for?
Jet 3 Ultra Power Chair Logo

583 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jet Health & Beauty Experts

Colin Taylor

Level 2 Expert

341 Answers

wcdoc1953
wcdoc1953

Level 2 Expert

278 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Jet Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...