Question about Panasonic Projection Televisions

2 Answers

Panasonic TX28DTM1 can see picture through a blue hayse on digital freeview The analogue picture is OK

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 125 Answers

Hey William,

I see that you are having trouble with your freeview tuner although i do not know if you are using a freeview box or the one that is integrated in your Panasonic TV. I have noticed also that the integrated freeview is of poor quality since and there have been some concern and questions about freeview. Try switching to an off board freeview box, such as panny dvd recorder dmr es20, or my Sony vtx 800u, you'll find out that it gives a brighter overall image. Hey I hope this works out for you Will and anymore questions let any of our experts know and we'll be glad to further assist you.


Posted on Oct 04, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,550 Answers

So what is your problem it looks like a statement . Specify your problem clearly with necessary details .

And old is your tv and have you faced any problem or replaced any component recently .


post back these details



Posted on Oct 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you tell me how to tune in a channel when ppreparing to use a freeview box on a onyx sw 1536 ld


Unless you've got an "expensive" Freeview box that modulates its output on to the RF (Aerial) connector then you can't. Most Freeview boxes have 2 aerial connectors - 1 IN from the Aerial itself and 1 OUT to connect to the TV - BUT this is ONLY a PASS-THROUGH connection. This means that the digital Freeview signal which is decoded from the aerial signals is NOT output on the OUT connector and sent down the co-axial cable to your TV. Only the "old" ANALOGUE (not Freeview NON DIGITAL) comes down that co-ax. What you should do is connect the Freeview box to your TV with a SCART cable via the SCART connectors on both. You need to select the AV input on the TV using the remote.
Even if you do have an "expensive" box that does modulate the digital decoded programmes and output these of the RF OUT connector, you should still use a SCART cable as the picture produced will be far better
Hope this helps

Jul 06, 2010 | Projection Televisions

1 Answer

Tv works but picture is showing in blue


If the picture is blue only and there is no red or green, you have either colour gun failures or if you are trying to watch a picture from a component source there maybe something wrong with the red and green cable feeds. Try watching a DVD using a single composite video feed (usually a yellow RCA plug). If this unit has an internal tuner (either analogue or digital) and you still only see blue broadcasts then you have a problem. Whether this unit is an LCD or CRT rear projection TV the repairs will probably be expensive. Ultimately, it is not a user repairable device and needs a qualified Sony tech to undertake the work.

Sep 26, 2009 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

No digital picture on digital TV


Are you getting a snowy picture, If so, you`re still on analogue. If you are on a digital channel with say no signal, you should get a blank screen with either a message saying no signal or a dot on the screen. Ian

Jul 24, 2009 | Sony Projection Televisions

1 Answer

Cant retune my digtal freeview as my picture keeps freezing


The retuning process is as follows:

  1. Press the [i+] or MENU button on the remote control to display the DIGITAL INFO menu.
  2. Press the BLUE button to display the MAIN MENU.
  3. Press the UP or DOWN buttons to highlight AUTO TUNING then press the OK button to display the AUTO TUNING MENU.
  4. Press the RED button to start the auto tuning process for all available digital channels.
  5. Wait for the process to complete.

If you wish to CANCEL the auto tuning process whilst it is processing then press the BLUE button at any time.

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

Jun 02, 2009 | Samsung HL-S5086W 50" HDTV

2 Answers

Do not understand how to set up my alba digi box to my television and recieve basic digital channels help!


Hi.

Ok
1) plug aerial in to the antena in sock on freeview box.
2) plug short aerial type lead in to rf out socket on freeview & antena in socket on TV.
3) plug A scart lead in to the socket marked TV on freeview box & the other end of scart in to one of the scart sockets on the TV.
If your TV has more than one socket plug it into the one marked AV1 or AV2.

4) plug in freeview to mains electricity & switch box on.
5) Turn TV on freeview should appear automatically if it doesnt look on your TV remote for A button marked AV or a button with either A circle or square with an arrow going through it you may need to press this several times until you see digi picture come up.
Thats basically it but do check that you dont need a new aerial etc to be able to get digi signal in your area.

http://dysonmanuals.llc.nu/

Jul 26, 2008 | Projection Televisions

1 Answer

WHARFEDALE LCD2610AF WHEN I TURN ON DIGITAL I HAVE PERFECT PICTURE &SOUND.AFTER 10 TO 30 MINUTES THE PICTURE FREEZES AND THEN SCREEN TURNS WHITE WITH AGREEN HORIZONTAL BAND LOWER HALF OF SCREEN.WHEN...


Hi.

If the picture & sound are ok in analogue mode then chances are you have problem with digital tuner.
This may be expensive to repair so I would advise connect external freeview box or sky etc to get digi channels using scart to connect to your TV.

Jul 16, 2008 | Projection Televisions

1 Answer

Will this tv work without a converter box when everything goes digital?


Hi.

If your set only has Analogue tuner you will need either Sky. Virgin, Freesat, or freeview box to be able to watch TV channels.

Jun 22, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

Are you a Panasonic Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...