Question about Hitachi 51G500 51" Rear Projection HDTV-Ready Television

3 Answers

Did you fix your Rear Projection TV, I have the same problem...

I have the exact same problem on my Hitachi rear projection HDTV. It too is just over 1 year old and has the same red flashing or fluctuation in the red crt. Did you find the reason for this? I can find no solution so i'm hoping that you did and can help me. I do not have the exact same set, but I'll say the problem could be the same...

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a rear projection phillips magnavox about 10 years old. it was only used probably about 3 years. When I turn it on it shows briefly AUG 1Y PB PR and thens goes off. Any suggestion?























it

Posted on Jul 09, 2010

The red crt board was cold soldered. I took it out, completely resoldered the entire board and have not had a problem since.

Posted on Oct 24, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

IS UR TV BULB DRIVEN IF NOT UR TV WILL NEED TO HAVE THE CONVERGENCE ADJUSTED

Posted on Oct 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hitachi 46f500 46 in problem double picture end two collor


This is symptom of convergence output chips failure in rear projection tv, replacement of convergence output chips will fix the problem.
Chips/ IC replacement requires soldering work in circuit board, if you are not familiar with electronics stuff fixing an soldering work, call local tv repairman to help you.
Thanks.

Oct 26, 2010 | Hitachi 46F500 46" Rear Projection...

1 Answer

OLD Hitachi 50EX13K rear projection TV now has bow shaped picture


Your convergence ic's have to be replaced along with checking all the bias resistors for exact value. Easy for me! I don't know what your electronics background is?

Oct 30, 2009 | Hitachi Projection Televisions

1 Answer

Broken screens on 53'' Hitachi rear-projection TV


I think it would likely work if you trimmed it evenly around the sides in order to maintain the central position. Focus may have to be adjusted but thats all.

Oct 25, 2009 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

Hitachi rear projection tv 50UX22b


Symptom: DEAD
Cause: CHECK I402-IS05-I601

The full repair manual can be found HERE!

May 12, 2008 | Panasonic PT-53TW53 53" Rear Projection...

1 Answer

Blue haze on hitachi 51" tv


http://www.hdtvoice.com/voice/showthread.php?t=15263

Jan 12, 2008 | Hitachi 51F500 51" Rear Projection...

2 Answers

Hitachi 50 rear projection


Just curious... since the Hitachi 50UX57B projection TV does not have any lamps in it, exactly which "lamp" did you replace? Did you actually replace the entire blue CRT itself?

Jul 23, 2007 | Hitachi 50UX57B 50" Rear Projection...

Not finding what you are looking for?
Hitachi 51G500 51" Rear Projection HDTV-Ready Television Logo

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hitachi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...