Question about InFocus ScreenPlay 4805 Multimedia Projector

1 Answer

Blank screen All of a sudden when trying to watch a movie all I get is the blue Infocus screen. The sound is on but the picture is not. This happened before, but I do not remember what I did to correct it. Any suggestions? Also, I'm not sure what the model # is. We lost the manual while moving.

Posted by on

  • patickl Oct 04, 2008

    After unplugging as suggested, all is well in movie land. Thanks IrishDruid!!!!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

First check if the cables are working properly. Check for loose connections and any kinks in the cables. If they are fine, try a hard reset - Unplug from power source, remove cables. Wait about 10 minutes. Now redo everything and plug in. If it still does not work, then you will have to get the device serviced..

Posted on Oct 04, 2008

  • Swilin Sampson
    Swilin Sampson Oct 04, 2008

    Great! Glad I could be of help :)

    Cheers,
    IrishDruid


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't get anything other than a blue screen with my Wii connected to my tv. All cables are firmly plugged in and the blue screen appeared while I was watching a movie. Now there's no sound or pictur


The Wii has a known video problem. At fault is the nVidia video chip which gets hot and separates connections to the motherboard. The solution is on utube. Search for the oven solution for nVidia chips.

Feb 03, 2013 | Televison & Video

3 Answers

I have digihome tv has sound but no picture and nothing on virgin


is this happened either watching a tv channel or even watching dvd movies?. and then does the display only white screen or a totally black screen?.

Oct 16, 2012 | Digihome LCD TV

1 Answer

Emerson TV no picture, but still have sound


If this is an LCD TV, show a flash light (torch light) on the screen from a safe distance.
If you can see the picture, the backlight has gone off and might need
of a qualified service technician.

Aug 05, 2012 | Emerson Televison & Video

1 Answer

TV goes blank - no sound or picture


Sounds like a bad capacitor or two in the power section. Do you hear a hissing sound also?

Nov 18, 2009 | Pioneer PRO-510HD 53" Rear Projection...

1 Answer

Infocus X1 picture freezes and dissapears and then comes on again


your display settings may be off, so change settings to factory reset and you may have to drop the resolution on your computer. you may also have a bad cable, so try a different cable.

Jul 03, 2009 | InFocus X1-RE Projector, Factory...

1 Answer

Blank screen on my laptop when trying to watch movies yet sound is audible


maybe it is a problem with your video card driver, try to install it again

May 28, 2009 | HP Compaq Presario 2200 Notebook

1 Answer

My Infocus 4805 suddenly blackout


First check what is the lamp you using please use lamps recomended by SONY only. That lamps might run up to 2000 hours so.......try checking your lamps and let me know.

Jan 26, 2009 | InFocus ScreenPlay 4805 Multimedia...

1 Answer

Blue screen with alpine DVE-5207


there is a ground wire off of the back of the deck find it using intall manual the screen is blue because this wire isnt hooked up and set properly this is a safety switch so the driver cant operate the vehicle and try to watch a movie at the same time

Jan 26, 2009 | Car Audio & Video

2 Answers

No picture or sound, just blinking power light


Hi...I am sorry to say that I had this exact problem. It ended up being the upper and lower panel drives. I contacted Hitachi and even though my unit was out of warranty, they agree to pay for parts. I paid for labor myself, and it cost me $199.95.

Good luck with it...let me know how it turns out for you.

Aug 10, 2008 | Hitachi 55HDS69 55 in. Plasma Television

1 Answer

Screen goes blank momentarily


cover up the infrared remote sensor on the projector. The heat of these colours or something might be messinf with the infrared remote sensor. TRy this and see what happens. It may just be bad contacts. Some projectors just cant handle stuff like this. Some were meant for presentations and presentations only. BUt seriously try covering the remote sensor to see what happens. If it is an older projector the infrared signal detector might be sensitive to bright light or stuff like that.

Aug 23, 2007 | InFocus ScreenPlay 4805 Multimedia...

Not finding what you are looking for?
InFocus ScreenPlay 4805 Multimedia Projector Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top InFocus Office Equipment & Supplies Experts

Juan Carlos Pacheco

Level 1 Expert

36 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Are you an InFocus Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...