Question about Lands Phones
I doubt it's the battery. As I understand it the base works fine and the problem is only with a cordless phone. Are you using an external charger stand for the cordless handset? These phones need to be registered to the base unit. That is usually done by installing the cordless phone in the base unit but you may need to do that shortly after insalling the battery or you could have a register button or setting.
Posted on Jul 07, 2007
unplug everthing from all jacks in the house. call your # a couple of times. if the line rings, plug everything in 1 at a time, but call again after each hook up. if the line goes dead or is busy, that phone you just plugged in is the problem. [ a short in the phone, computer, answer machine, or any piece of equipment plugged into the phone line.] if the line is busy when everything is unplugged, call your phone company. there maybe a problem with your inside wire.there also maybe a box [called a nid] inside your basment/garage or on the side of your house, where you can plug your phone directly in, bypassing all the jacks in your house
hope this helps.
Posted on Feb 13, 2008
Try punching in the number to call first THEN hit talk.. It should dial and call at that point..
Just like when making a call from your cell phn - dial the # first..
good luck ;o)
Posted on Sep 17, 2009
Tips for a great answer:
Feb 06, 2015 | Philips SE145 Cordless Phone
Apr 24, 2013 | Philips SE145 Cordless Phone
Oct 29, 2012 | Philips SE145 Cordless Phone
Oct 02, 2010 | Philips Kala 6523 Cordless Phone
Jul 10, 2009 | Philips CD1552B/17 Twin Cordless Phone
Apr 07, 2008 | Philips 2252 Twin Cordless Phone
521 people viewed this question
Usually answered in minutes!