Instruction manuals for dell 1355 printer - Dell 1350cnw Laser Printer

tanutran,
That references the ADC sensor on the printer. which should be located on the belt of the unit. Might be a bit difficult to get to on a 1355 since it is all enclosed. You might try using the cleaning rods on the toners and looking into a replacement if you warranty is valid.
Thank You,
Dell-Jesse L
Dell Social Media and Communities
#iwork4dell

Replace the fuser

Common problem. \this is a common problem with many printers. You have taken the correct action. For this problem, open the side where the ink is inserted. Take out the cartridge and re-insert. More times than not this resets the printer and should work just fine.. Let us know how this works for you!

Hello

You can download software and driver from:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=306898&

Best regards,
Zizzler

Hello,
You want to isolate g, Ok. Start stripping it of all extraneous factors, by doing the inverse of each operation.
1. There is a 1355 multiplying the term with g: I divide by 1355 to get

(1+g)^7=20000/1355 = 14.7601476

2 The expression containing g is raised to the 7th power. So I do the inverse operation which is to extract the 7th root. If my previous result is still in [Ans] memory I write on my

(1+g) =[Ans][^](1/7) that gives 1.468970104

3. Now g is an expression that involves and addition. I perform a subtraction: I subtract the number 1. Assuming that my last result is still in [Ans] memory (I did not perform any other operation)

g=[Ans]-1 that gives 0.468970104

Hope you find this more instructive than just giving you the answer.

not surprising.

first thing you'll need are good clean drivers

get em here