Casio tk-7000 scanning and PLU programming

It is here

To Print Plu Programmings - Casio SE-S400 User Manual ...

https://www.manualslib.com > ... > User manual
Casio SE-S400 Manual Online: to print preset characters of plu, To Print Plu Programmings. Step 1 Turn The Mode Switch To Pgm Position And Select [System ...

You can add a Hand held Scannerbar with your Casio Tk -7000
Hand held bar code scanner(HHS-15) *

Essential functions for the scanning environment such as Not Found PLU(NFP),PLU batch maintenance file,bottle link and Mix & Match functions are available on the TK-7000 model.

You can attach a Voyager Scanner with your TK-7000 model.

How to add in Casio Cash Register:
1. connection to cash register - unscrew and screw back in.
2. connection to scanner, unplug using paper clip into hole and push back in again.
3. rescan default sheet given whe nyou purchased the machine.
4. clean head of scanner.
5. check for cracks on scanner, ie. loss of vacuum.

For MOre Information visit the following sites:
1. Multisoft India
2. Cash Register
3. Bar Code Basic
4. Scanner Model
5. Casio 7000

Regards
Ellin

Yes, the PLU number for each item will first have to be programmed into the machine before it can recognize any barcode.

Hi Ray Jump,

I am not 100% on the TK 6000 but on the TK2300 you turn the key to PGM press 3 subtotal, 1166 subtotal, XX00 (xx being department number) press all of the PLU's you wish to change and press subtotal to finish.

Good Luck

Most models allow you to set a department price. Try that

The TK-T200 comes with 30 Flat PLU buttons. These can be set to open price if you want to use them as departments. To remove the fixed price, Turn key to program mode 0 now press the PLU button you want to change SUBTOTAL
Now you will need to enter a price (no decimal point) each time you use it in REG mode.
If this is not suitable, please let me know more information about your needs.
-------------------------------------------------------------------
If anyone needs a manual for a Casio TK-T200 cash register,
http://the-checkout-tech.com/manuals/cashregisters/Casio_TK-T200_users_and_programming_manual.html

http://the-checkout-tech.com/manuals/cashregisters/Casio_TK-T200_service_manual.html

just link the PLU in the link list program to another PLU, list, deptment etc. In P3, #3 key features, and then plus

Hi.
I haven't worked with the 1550, but most Casios are the same.
Try this:

Turn key to program.
Press 0
Press the PLU that you want to set as open priced.
Press SUBTOTAL

That will set the price as 0 for that PLU. Now we set the feature for that PLU to allow manual pricing.

Leave key on program.
3
SUBTOATL
0
Press the PLU again
SUBTOTAL

Try that. If you had tax set to that PLU, you may need to set it again.

Mark

find out what plu it is then re pgm it

turn the key to PGM
enter 3 & press Subtotal
enter 0166 & press Subtotal
enter 0 and press the faulty PLU
now press Subtotal

enter 1066 & press Subtotal
enter 0 and press the faulty PLU
now press Subtotal
turn the key back to Reg

take a readout of the department and groups first
pgm6
205 subtotal
1 cash 30 cash
this will print out your departments

pgm6
206 subtotal
this will print out your groups

pgm3
1166 subtotal
enter your 6 digit number then press all the products linked to that department / group

your 6 digit number = DDGG00 DD= Department GG= Group
then 00
so for dept 1 gp 1 = 010100

when finished
press subtotal