Schematic diagram Hello , Do anyone here knows where can I get a schematic of magic sing?

Lyrics

Songbird sings from the heart
Each word can tear you apart
I sing you sing along
You find your life in my song
When you need the strength to carry on

You've got me to turn to 
With the songs that I sing
And the magic they bring
They've helped you be strong now

The song sets you free
But who sings for me
I'm all alone now
Who sings for songbird

Sometimes when I'm all alone
I sing my saddest song
Lonely and no one can see
This time the song is for me
I can touch your secret place inside

And still you don't know me
With the songs that I sing
And the magic they bring
You've learned to be strong now

My song sets you free
But who sings for me
I'm all alone now
Where is my songbird
Where is my songbird
Who sings his songs for me



If you need further help, reach me via phone at https://www.6ya.com/expert/casey_35b114d22660c612

Most buzzes are caused by one of two things: "DIRTY" power or a lifted\non-existent ground. Allow me to explain;
"DIRTY" power is just that. It comes in and carries a lot of static with it. Most newer systems have filters built in on the power side of the main board. The fix? Try running your Magic Sing from a wall socket that doesn't have anything else pulling from that particular circuit. You should also invest in a GOOD power strip and not one that cost $5-$10 bucks. All these are good for is getting power to multiple products simultaneously, AND they don't have the resistors and filters to give you a constant 120v AC.
Monster Cable Co. was a very sought after item up to the point to where Radio Shack no longer carried their products.

If you really want to get your money's worth out of the instruments you buy, don't slack on the power strip. This will be the most costly mistake ANYONE can make.

Here is an article that explains what I did and gives you answers on how to fix this issue.

Hope this helps. Dirty Power What It Is and Why You Need to Clean It Up Schneider Electric...

hello saleem in order to help you load up some pictures best regards antonio

it would not sing.

I can reprogram your magic sing,first I want to know the model.Just post the serial number of your unit.Its in the back cover of song chips compartment.

You need to connect directly the sound wire of your magic sing to your home theather while the video wire of your magic sing directly to your hdtv. If its difficult to do because of distance, buy an rca extension to extend your magic sing wire to make it reach to the other end.

i bought et18k. just the same as yours.its 2 days old and has the same problem. the technical assistant says that its because of the digital setting that new tvs have. there are two ways to solve this though:

1. connect the video (yellow plug) to the tv. and the other two plugs (yellow and white) to the stereo. when i say stereo, its not the dvd home theater system that you have but a separate one. if you connect it to the home theater that you have, it'll just sound the same, you still have the delay.

2. connect the magic sing to the older tvs hangin out. and you'll get no problem at all.

**TVs such as sony, samsung, philips, sharp and all plasma tvs including other newly designed tvs will have the delay since they all share the HDMI thingy that causes sh*t.

You need to configure it out.

1. Connect the magic sing in your TV
2. Turn on your TV
3. Magic sing should be Off
4. On your magic sing; Press and Hold "8" then while holding "8" press "power button", count for thre seconds then release both buttons (PAL to NTSC)

or

On your magic sing; Press and Hold "9" then while holding "9" press "power button", count for thre seconds then release both buttons (NTSC to PAL)

Hi im joe,
Regarding your concern the ET 3000 magic sing does not have background vocals at all. The manufacturer design the magic sing for sing along purposes only but they are now improving there future products to have that feature with background vocals.

hi i am working in Wow Magic sing- one of the magic sing distributor in Philippines. Is your unit wow , even if its our competitor, the manufacturer is just the same.

kindly give me more detailed information about the model and description. please be more specific.

please try to remove all song chips- if there are any...inverted and dirty song chip wont make the microphone turn ON.
check the cable and cord- open (loose connection) cord or open adaptor will not make it work as well.