Question about Casio DL 250LA Calculator

8 Answers

Clear plastic cover...

I am looking for the clear plastic cover with the serrated edge (where the paper exits the machine).

Posted by on

  • jfCeC Oct 07, 2008

    the link provided http://www.free-service-manuals.com/Calc... requires another membership fee to access the service manual. I do not need to service this machine, I only need to know where to purchase a plastic part.

  • jfCeC Oct 07, 2008

    I have tried Ebay, but have only found complete machines, no parts. Any other suggestions?

×

8 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 763 Answers

Sir ive seek all the websites and still i cant find one. did you try to check on some electronic stores or school supplies. try other plastic cover that fits to your calculator or maybe they can make one for you.


CHARCOIS

Posted on Oct 07, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

Www.radioshack.com

you will get all you require here.
just click the link and order 1 for you.get at your door step.

Posted on Oct 07, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Casio Master
  • 67,912 Answers

They don't supply these kind of parts, no demand, I am not trying to be smart but either replace it or use a pair of sissors to cut the paper.

Posted on Oct 07, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 171 Answers

Parts Distributors This list is subject to change without notice.
Official Parts Distributors Listing.
California
Pacific Coast Parts Dist. Inc.
153 E. Compton Blvd., Gardena, CA 90248
Tel: 310-515-0207, 800-421-5080
Fax: 800-782-5747
Clear plastic cover... - mark_link_def.gifwww.pacparts.com
mark_link_def.giforders@pacparts.com
New Jersey
Eric Armin Inc.
567 Commerce St.
Franklin Lakes, NJ 07480
201-891-9466 & 800-272-0272
Fax: 201-891-5689
mark_link_def.gifwww.eaiusa.comClear plastic cover... - mark_link_def.gifhttp://i.fixya.net/uploads/images/mark_link_def.gif" alt="mark_link_def.gif" class="h_mi" />info@eaiusa.com
New York American Perfit Crystal
520 8th Ave., New York, NY 10018
Tel: 212-246-8292 (NY), 800-345-0537 (Outside NYCClear plastic cover... - mark_link_def.gif265-4085
mark_link_def.gifwww.americanperfit.com
mark_link_def.gifinfo@americanperfit.com
mark_link_def.gifWorld Wide Authorized Service Centers

Posted on Oct 07, 2008

  • Todd Gale
    Todd Gale Oct 07, 2008

    Why shouldn't he just go to the Casio Parts Distributions Centers and get a new, quality part. Please, all of you, stop wasting these peoples time and patience. If you do not have the correct answer, do not answer at all. It is just frustrating the customer.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 65 Answers

Hi... its not possible to get that cover... better try to contact the manufacturer (CASIO) regarding this issue.. 

Posted on Oct 07, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 334 Answers

Best bet is ebay for parts

Posted on Oct 07, 2008

  • nick helpap
    nick helpap Oct 07, 2008

    well on ebay look for one broke cheap 2 bucks then take cover what i ment

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,879 Answers

EBay

search for Casio > DL 250LA Calculator accessories

Posted on Oct 07, 2008

  • monk3ybidzness
    monk3ybidzness Oct 07, 2008

    >for the other guy
    i dont think we need a manual for this :)

  • monk3ybidzness
    monk3ybidzness Oct 07, 2008

    you're right, it's hard to find one

    i tried :
    http://www.amazon.com/b?ie=UTF8&node...

    http://www.calculatorsource.com/accessor...

    do some browsing

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,422 Answers

HI

Please click on the below link to download the service manual:

http://www.free-service-manuals.com/Calculators/Casio_Calculator_Manuals/

Posted on Oct 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i clear paper jam after tearing half of the paper leaving other piece locked inside machine?


IF the jammed paper tears and you cannot remove the paper either from the paper output slot or from the transport unit, or the jammed paper remains inside the machine, remove the paper following the procedure below. 1. Turn off the machine, and unplug the power cord of the machine from the power supply. 2. Open the paper output cover. Remove the paper on the front tray if any.
Important:
    Do not touch the clear film (A). If the paper or your hands touch these parts and blot or scratch them, the machine can be damaged.

3. Make sure that the FINE cartridge holder does not hang over the paper. If the FINE cartridge holder hangs over the paper, move the FINE cartridge holder to the right edge or the left edge whichever is easier to remove the paper. When you move the FINE cartridge holder, hold the FINE cartridge holder and slide it slowly to the right edge or the left edge.
4. Hold the jammed paper with your hands.
If the edge of paper is jammed near the paper output slot, pull the edge of paper to the position where you can hold it with your hands.
5. Pull the paper slowly not to tear it, then pull the paper out.

6. Make sure that all the jammed paper is removed. If the paper is torn, a piece of paper may remain inside the machine. Check the following and remove the piece of paper if it remains.
7. Close the paper output cover, then reload the paper.
All print jobs in the queue are canceled. Reprint if necessary.

Jul 20, 2014 | Canon Pixma Mx432 Wireless Inkjet Office...

2 Answers

I have a message on screen sayng " ADF Jam" there is no paper jamming the system. I cannot make this message go away, and so i cnnot use any other function of the printer. How might I clear...


Hi travlynn2,

  1. The ADF
    unit is the grey paper tray located on the top of the scanner unit.
    Check the following points if it does not feed paper, or you receive an "ADF jam" error message:


  2. Check the position of the ADF document guide:


    1. Lift up the ADF unit. Locate the document guide on the underside, as shown here:


    2. The document guide should be tucked in behind the grey plastic casing, but a paper jam can push it out of position. Figure 8 below shows the correct (1) and incorrect (2) positions:


    3. If your document guide looks like example (2)
      on the right, lift it out on the right-hand side. Tuck it in behind the
      grey section, so that it matches the example on the left (1).




    1. Close the scanner unit.


    2. If the printer is displaying "ADF Jam, press start to continue", press the B/W Start button to clear the error:


    3. Test the printer by scanning or faxing via the ADF unit.


  3. Check the ADF edge guides:




    1. The adjustable paper tray edge guides must be set to the correct paper size for the paper you are loading. Otherwise, the paper may skew, misfeed and/or jam.



    2. Slide the edge guides to enclose the loaded
      paper (in the direction of the yellow arrows below), without causing it
      to bunch or crease. The paper should be aligned with the relevant paper size marker:

      Figure 9. The ADF edge guides.


  4. Check the ADF unit feed rollers:


    1. Open the cover of the ADF by pulling up the grey lip, as shown below:


    2. Check thoroughly for fragments of paper and foreign objects. Take care not to tear any jammed paper when you remove it.


    3. Use the green gear (circled in yellow below) to turn the paper feed rollers and feed through jammed paper:



    4. Paper dust or foreign material on the rollers may cause paper to misfeed. Clean these parts with a damp, well-wrung cloth:


      1. The upper paper pickup rollers (circled in red, above top left). You can turn these by hand.



      2. The lower paper pickup rollers. These will rotate as you turn the green gear (circled in yellow above). See the inset for a close-up of the lower rollers.


    5. When complete, close all the covers.


    6. If the printer is displaying "ADF Jam, press start to continue", press the B/W Start button to clear the error:


    7. Test the printer by scanning or faxing via the ADF unit.



  5. Check that the ADF unit sensors are not obstructed.




    1. Open the cover of the ADF unit.



    2. Look at Figure 12 below. Check the position of the black plastic parts (the actuators) circled in red.



    3. If the black plastic actuators do not stick out from the ADF cover, they may have been pushed out of position by a paper misfeed and be obscuring the ADF sensors. Tap the back of the ADF unit firmly to release the actuators.


    4. When complete, close all the covers. Check and test the printer as explained in Step 6.d.vi.
Hope this helps.

Thank you for using FixYa.

Sep 21, 2011 | Epson ACULASER CX11NF All-In-One Printer

1 Answer

Cannot remove the paper jam


To clear the message Paper Jam from the display, follow the steps listed below:

NOTE: images shown below are from a representative product and may differ from your Brother machine.


STEP A. Check for and remove any jammed paper or foreign objects in the machine

  1. Unplug the Brother machine from the power outlet.


    Caution Before you unplug the machine from the power source, you can transfer your faxes that are stored in the memory to your PC or another fax machine so you will not lose any important messages. Refer to the Related FAQs in the end of the page for information. (only for applicable models)

  2. Lift the scanner cover using the plastic tabs or finger holds, located on the left and right side of the machine until it locks securely into the open position.


    jam_coveropen.gif

    Caution DO NOT touch the encoder strip. The encoder strip is a clear plastic strip in front of the white vinyl band (outlined in red as shown in the picture below). If the encoder gets markings or debris on its surface, it may cause other problems.

    20090511_02.gif






  3. Verify the location of the print head. The print head is a black square object, located behind the encoder strip. The print head moves from left to right.




  4. Move the print head to the middle using your fingers.


    Caution DO NOT touch the encoder strip (marked in red shown below).
    20090511_04.gif

  5. Check for and remove any ripped paper or a foreign object in the left corners or underneath the print head.


    Hint The ripped paper may be very small. Using a flashlight will help you to find the ripped paper.

  6. Turn the machine around and open the Jam Clear Cover (1). Look inside the machine and remove any jammed paper.

    jam03.gif

  7. Close the Jam Clear Cover. Make sure the cover is closed properly.


    jam05.gif

  8. After removing all of the paper scraps, Close the scanner cover by lifting the scanner cover to release the lock. Gently push the green scanner cover support down and then close the cover.

  9. Remove the paper tray (1) from the machine.

    jam01.gif
  10. Place one of your hands under the LCD unit and into the opening of where the paper tray was.

  11. Using your hand, lift the front of the machine approximately 6 inches off the surface.

    jam_6inch.jpg

  12. Look inside the tray areas roof of the machine and a row of black rollers will be aligned across. See picture below.

    jam_exit_roller.jpg

  13. Look in-between each of the black exit rollers for a piece of stuck scrap paper. (A flash light may need to be used if you are having trouble locating the paper scrap).

    jam_paper_scrap_stuck.jpg

  14. Using a pair of tweezers, the paper scrap can be easily removed from the exit rollers.

  15. Place the machine gently down onto the surface.

    • If no paper scraps were found inside the machine, please check the paper in the tray. If the paper is slightly curled, the print head will catch the edge of the paper and tear it. To resolve the issue, the paper in the tray must be replaced and continue to STEP 16.

    • If paper scraps were found and removed from the machine, continue to STEP 16.


  16. Put the paper tray back into the machine.

    20090511_09.gif

  17. Plug the power cord back into the power outlet.

    • If the LCD displays the date and time, go to STEP D.

    • If LCD displays the message "Paper Jam" go to STEP B.


- If the print head is on the right side:

  1. Plug the power cord back into the power outlet and wait for the machine to stop making noises.


  2. Press the Stop/Exit key for approximately 5 seconds until the print head moves to the middle.


  3. Unplug the machine from the power outlet.


    Caution Make sure to unplug the machine. The print head may move and injure your hand. Before you unplug the machine, you can transfer your faxes that are stored in the memory to your PC or another fax machine so you will not lose any important messages. Refer to the Related FAQs in the end of the page for information. (only for applicable models)

  4. Examine the right side of the machine where the print head had been positioned and underneath the print head and remove any pieces of ripped paper or foreign objects.


    Tweezers may be used with caution to remove paper scraps or the foreign objects.


    Hint The ripped paper may be very small. Using a flashlight will help you to find the ripped paper.

  5. After confirm the paper scraps or the foreign objects in the right corners or underneath the print head, go to STEP 6.

Mar 10, 2011 | Brother MFC255CW All-in-One InkJet Printer

1 Answer

Please advise what you charge for solving following problem:\r\n"Paper jam on Brother MFC-260C:Following Brother User's Guide, I removed the Jam Clear Cover, and pulled out jammed paper, but got only...


1. Unplug machines power cord from the power outlet. 2. Lift the scanner cover using the plastic tabs, located on the left and right side of the machine until it locks securely into the open position. 4c89ecbe03c0173ae1000000cd8620c6.gif 3. Remove all of the paper scraps stuck inside the machine. NOTE: The print head can be moved manually with hand to assist with removing all of the paper scraps. 4c89ed1103c0173ae1000000cd8620c6.gif

4. Turn the machine around and open the Jam Clear Cover (1). Look inside the machine and remove any jammed paper. Then close the Jam Clear Cover (1).


4c89ed6103c0173ae1000000cd8620c6.jpg


5. After removing all of the paper scraps, Close the scanner cover by lifting the scanner cover to release the lock. Gently push the green scanner cover support down and then close the cover.

6. Remove the paper tray from the machine.


4c89edc803c0173ae1000000cd8620c6.gif


7. Place one of your hands under the LCD unit and into the opening of where the paper tray was.

8. Using your hand, lift the front of the machine approximately 6 inches off the surface.

4c899e3b1aad6d37e1000000cd8620c6.jpg


9. Look inside the tray areas roof of the machine and you should see a row of black rollers. See picture below.

4c899f921aad6d37e1000000cd8620c6.jpg

10. Look in-between each of the black rollers for a piece of stuck scrap paper. (A flash light may need to be used if you are having trouble locating the paper scrap).


4c898807276d1739e1000000cd8620c6.jpg


11. Using a pair of tweezers, the paper scrap can be easily removed from the exit rollers.

12. Place the machine gently down onto the surface.

- If paper scraps were found and removed from the machine, continue to STEP 13.

- If no paper scraps were found inside the machine, the paper in the tray may be causing the issue. If the paper is slightly curled, the print head will catch the edge of the paper and tear it. To resolve the issue, the paper must be replaced.

- If you do not have replacement paper, follow the rest of this solution, after you have replaced the paper.

- If you replaced the paper, continue to STEP 13.

13. Put the paper tray back into the machine.

4c898ab7276d1739e1000000cd8620c6.gif

Dec 18, 2010 | Brother Office Equipment & Supplies

1 Answer

P26-dh III - I am also unable to load the printer paper. I can't figure out how it is to be fed in.


It is necessary to feed the paper through a slot on the back of the printer in the dark gray area. Feed a single paper through and push the FEED button. When you see it appear, feed the paper through the clear serrated slot on the top cover over the printer.

Mar 18, 2010 | Canon P1-DHV Calculator

1 Answer

Need to identify where paper sensors are in paper path. Can not clear paper jam. have totally cleared paper path removed all necessary parts even removed covers and blew machine off. also, sensor for over...


its probably exit sensor which is in the right hand corner just above fuser. hard to get to will need to remove fuser,front small square cover and prob exit cover ull see actuator and a long shaft which will lead u to a sensor.it will prob out of place or covered in dust.

Feb 24, 2010 | Ricoh Aficio 180 Laser Printer

2 Answers

Paper jam every time you try to print


remove existing paper..check for black sensor. clean pickup roller
your question is as evasive as my answer.

Jul 09, 2009 | Dell 1700 Laser Printer

1 Answer

Close Exit Cover to Continue error message won't go away


sounds to me like one of two things has happened.
More than likely the actuator tab on the cover snapped off,
Look for an opening around the edge of the cover , there is a cover interlock switch in there. Note its position and look at the cover to verify there is a tab on the cover to actuate the switch, Or you may have a loose connector on the interlock switch, or a bad switch, although I have never seen one of those switches go bad.

Jan 30, 2009 | Xerox Phaser 8400 Laser Printer

1 Answer

Paper Jam - Xerox 8200 Phaser Printer


I was same problem and I repaired. In to machine, look of preheat switch ( behind of black roller ). I found piece of paper under the switch. Good luck :)

Jun 02, 2008 | Xerox Phaser 8200 Laser Printer

6 Answers

OKI C5100 printer repeated jams. Usually flashing the code of "380: paper jam" as the message.


I too kept getting the front cover paper jam despite followings Oki's paper jam removal instructions and blowing out the printer with compressed air.
In my case, the paper drawer was the problem.  When you pull out the drawer there is a spring loaded piece of white plastic at the very front of the drawer.  In the center of that is a gray rubber strip.  That strip had come loose in the center and bowed out, preventing paper from exiting the paper drawer.  I manually removed the strip, clipped off a little piece from one end so that it fit back in the recessed cavity on the white plastic piece and glued it back down.
This should be applicable to all Oki c5xxx color LED printers.

Dec 03, 2006 | OKI C5100n Laser Printer

Not finding what you are looking for?
Casio DL 250LA Calculator Logo

312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Office Equipment & Supplies Experts

k24674

Level 3 Expert

7993 Answers

kakima

Level 3 Expert

101580 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18357 Answers

Are you a Casio Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...