ERecovery expects there to be both C: (system) and D: (DATA) partitions on the drive as well as the hidden recovery partition. If you use Disk Management to shrink the C: drive, and create the D: drive, things will install properly.
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 50 answers of more than 400 characters.
An expert whose answer got voted for 20 times.
Re: non installment of acer erecovery solution
Do you get an error code? If not,are you running a system recovery thru
a CD or thru the HDD partition? If thru the CD, chances are, the disc's maybe corrupted. Check this out, and get new copy of recovery disc.
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1 Press <Alt> + <F10> or select Acer eRecovery Management from the Empowering Technology toolbar to start Acer eRecovery Management. 2 In the Acer eRecovery Management window, select the type of backup you want to create using Full or Fast. 3 Follow the instructions on screen to complete the process.
Acer eRecovery stores pre-loaded software internally for easy driver and application re-installation. 1 Boot to Windows XP. 2 Press <Alt> + <F10> to open the Acer eRecovery utility. 3 Enter the password to proceed. The default password is six zeros. 4 In the Acer eRecovery window, select Recovery actions and click Next. 5 In the Recovery settings window, select Reinstall applications/drivers and click Next. 6 Select the desired driver/application and follow the instructions on screen to re-install. At first launch, Acer eRecovery prepares all the needed software and may take few seconds to bring up the software content window.
If you have to use the CD/DVD's for recovery then you will have to buy or borrow a usb connected CD/DVD reader/player.
Using Acer eRecovery by following these steps:
1.Click Start, and then All Programs 2.Click Acer, and then Acer eRecovery Management 3.You may be prompted to enter or create a password. This password will be required to use eRecovery in the future. 4.In the next window on the left toolbar, select Restore. 5.Choose Reinstall Drivers or Applications 6.Choose Contents 7.Choose the driver or application you wish to install 8.On the right, click the Install link and follow the prompts. 9.The computer may restart when installation is complete. If it does not restart, manually shutdown and restart the computer. Note: For older Acer products, the Acer eRecovery Management program may not be available.
If you do not have a set of Acer Recovery Media, they may be purchased from our Acer Recovery Media Order Form.
Please take time to rate me thumbs up
In order to do this, you need to reformat your laptop. That means that you need the installer for your Operating System as well as your drivers. Secure this two installers and get back here if you need further information.
I do apologize for the inconvenience you have been facing.The reason why the laptop does not reboot to Windows even after reinstalling Windows is because the issue is with the hard drive not being recognized the reason for which you get a blinking line on the screen after the Acer logo .In this case I would suggest that if the laptop is under warranty please contact the Acer Technical support and have an order placed for repair.
Thank you for your time and best wishes for your effort.
Acer eRecovery Management and Acer disk-to-disk recovery are protected
by a password that can be changed by the user. Follow the steps below
to change the password in Acer eRecovery Management.
Boot to Windows XP.
Press ALT + F10 to open the Acer eRecovery Management utility.
Enter the password to proceed. The default password is six zeros.
In the Acer eRecovery Management window, select Recovery settings and click Next.
In the Recovery settings window, select Password: Change Acer eRecovery Management password and click Next.
Follow the instructions on screen to complete the process.
Drivers for Acer products may be found on the Acer support page ( http://gd.panam.acer.com/home/ ). Search for the product and download the drivers.
Alternatively, the factory installed drivers and applications can be re-installed by using Acer eRecovery.
Follow these steps:
Press ALT and F10 to start Acer eRecovery.
Please note: It will be prompt to enter or create a password. This
password will be required to use eRecovery in the future. Forgetting
this password will require the use of the recovery discs to reformat
In the next window, select Restore or Recovery. This will vary from system to system.
Choose Reinstall Applications/Drivers
Click on Windows on the left side of the page.
Choose driver or applications.
Choose the item to install
On the right, click the install link and follow the prompts.
The system may restart when installation is complete. If it does not restart, manually shutdown and restart the computer.
If a set of recovery
discs was created, or received when the system was purchased, the
factory installed drivers and applications may be reinstalled from that
media as well. Start the computer and insert the System CD (or the
first disc) and browse the disc and choose which item to install.