Question about RCA P52926 52" Rear Projection Television

1 Answer

How do i no what channel line for my area guide pluse its giving 4 options

How do i no which channel line up to pick for my area its giving me 4 choices

Posted by on

1 Answer

No sound, just a popping noise

Posted on Oct 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset factory defaults


I will presume you have the model listed here and have the Mitsubishi remote in working condition.

These sets have 3 hidden menus: Adjustment (stay out of that one), Convergence, and the OPTION MENU.

The option menu is the one you would want--it requires that you turn set on--enter a 4 digit number that is model specific.

In the option menu you can do a HARD reset which puts everything except convergence back to factory (that is stored in another area).

The reset puts all settings back to factory--set will come on once done on channel 3 in air band etc.

Let me know model number here is or is not correct and I will give you a link to the service manual with page number to look at---explains how to do the reset. Not a bad idea to save that manual as it contains all kinds of good info on this set.

SD TECH

May 26, 2012 | Mitsubishi WS-65411 65" Rear Projection...

1 Answer

Cable in my area has switched to digital cable. I own a Hitachi HDTV about four years old. When I scan my channels it will only scan analog channels...the digital channels are an option but I don't...


Unfortunately, you need a set-top box. The Hitachi 65F59 has an ATSC (digital OTA) and NTSC (analog) tuner. It doesn't have a clear-QAM (unencrypted digital cable) tuner.

There are a few DVR set-top boxes with QAM tuners that you can buy separately. (You will need to make sure a given model is compatible with your service. FIOS uses a different option on the Cable Card than other providers.) Alternatively, you can get a cable box from your company.

Retrevo has the manual for this Hitachi TV here: http://www.retrevo.com/support/Hitachi-65F59-TVs-manual/id/371ci977/t/2/ . You will need to enter a code to access the PDF.

If you want OTA HD, you will need to determine the correct antenna for your area and the direction to the transmitters. (External antennas pick up more stations. In some areas amplification may be needed to get a good signal.) See antennaweb.org or tvfool.com for searches on the appropriate antenna to get a signal and where to point the antenna. Antennaweb assumes an external antenna but is very conservative in the received channel list. You would need to set the TV signal input to Air and rescan for channels if you choose to go with the OTA signal.

I wish that I had better news for you.

Cindy Wells

Sep 06, 2011 | Hitachi 65F59 65" HDTV

1 Answer

CANNOT GET itv1. NEED TO RETUNE BUT DOESN'T PICK


Good Day,

Try this to reset your programming, but try to reset the whole set by unplugging TV and BOX from power source for 3-5 minutes then plug power cord back into power source. If that does not work try this:

Option Menu Setup
Follow the steps below for the initial set-up:
1. Select the "MENU" display by pressing the "MENU" button once.
2. Press the number buttons "0", "1", "7", "0" in sequence to select
the "OPTION MENU" display.
3. Press the "ADJUST" button to select "INITIAL."
4. Press "ENTER."
NOTE: At this time channel 3 is automatically selected.

Good Luck, Big IRISH>

Dec 15, 2009 | Mitsubishi WT-46809 46" Rear Projection...

1 Answer

Horizontal lines in the picture.


Give it time to warm up like another 10 to 15 mins i find put a tv guide channel on the screen stays pretty much the same picture, then leave the TV on" i use a 4 hour rule if i dont view in 4 hours or more i will close tv power

Oct 07, 2009 | Mitsubishi VS-60705 60" Rear Projection...

1 Answer

Have Warning message on DVD 'Your Guide Plus has not received TV Listings. Check your host channel.' What do I do?


Symptoms / Customer Description
TV Guide issues.
Example:
1. Not getting the correct info, or no information.
2. TV Guide giving double channels.
3. TV Guide grid comes up but no information.
[Primary Symptom Code: 118X ]

Solution

TV Guide information comes from the Host Station.

1. If no information on some channels or incorrect information not TV issue, but station not giving any information or incorrect information.

2. If grid comes up, but no TV Guide Info could be
siginal issue.

3. Double stations showing up. Unfortunately double listing is the way it's going to be. They have to send out all possible OTA listings for the area. You can hide the channels that you are not getting.

For these type of issues
Please have the customer call our Customer Support Line 800-222-7669
Our Call Center Rep. will fill out an investigation form with data pulled from the TV. These reports will be sent to Gem Star for their investigation, and the Call Center will get
back to the customer.

Apr 14, 2009 | Projection Televisions

1 Answer

How to use 2 switches in back of Mitsubishi tube TV


With any color conventional tube TV, magnetic fields can cause problems with the color. You can have areas on the screen where the colors will be wrong (green faces on people, for example). A circuit in the TV does something called degaussing, which helps to eliminate any magnetic field on the tube face. With a big tube set like yours, that degaussing isn't always 100% effective. Those two switches add in some extra neutralization. You don't need to use them if you aren't having color issues.

If you don't use the switches, leave the direction switch in neutral. If you do have some discolored areas, try all 4 combinations of the switches (north and south, high and low strength) and use whichever setting gives the best result.

Mar 31, 2009 | Mitsubishi Projection Televisions

1 Answer

Panasonic dmr-eh50 Clock setting greyed out - unable to reset clock after clocks went back.


To resolve this issue follow the steps below:

(1) Remove all discs from the unit.
(2) Set the unit to DVD Mode
(3) From the front panel of the unit, open the middle door to display the up and down channel buttons
(4) Press and hold both the up and down channel buttons until the unit displays "BYE" and then flashes "12:00 A"
(5) Release the up and down channel buttons
(6) This will clear the unit and you will be prompted to reset the TV Guide Settings
(7) Setup your TV Guide according to the on screen display
(8) From your remote select "SETUP"
(9) Scroll down to "Setup", right arrow to the options on the right, and down arrow to "Clock Settings"
(10) Select "Set Clock Manually" if your TV Guide Function is not providing you with the proper time

Good luck!!!

Oct 26, 2008 | Projection Televisions

1 Answer

RCA MM61110 Television


I had the same problem sometimes when my Gold Plus would reset itself and include all the channels but only those Over-The-Air channels. The only way I could change the programming was to completely shut down the power. Not just turning the tv off but completely unplugging it from the wall outlet. When you turn your tv back on you'll be able to choose from Antenna/Cable option. As for Guide,if you don't want to use it, don't set it up, it won't effect anything else on the television.

Aug 08, 2007 | RCA MM61110 61" Rear Projection Television

Not finding what you are looking for?
RCA P52926 52" Rear Projection Television Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...