Question about Meridian Two-Line Corded Business phone

Open Question

How can I program 2 lines into my Meridian M8314 phone?

I have 2 phone lines into my home and I'm trying to use my Meridian M8314 phone; when I plug in both lines and try to make an outbound call, it puts the call out on both lines.

How can I program the phone to give me "Line 1" and "Line 2" buttons?

Posted by on

4 Suggested Answers

  • 3 Answers

SOURCE: Programing outside (CO) line button

press program button then press the flexible where you want program the CO line then press 0, here u can select which CO line need to be program.

Ali

Posted on Sep 11, 2009

Testimonial: "Brother Ali I appreciate your help"

consultel1
  • 856 Answers

SOURCE: Hi there ... We have 4 lines in the office but on

Programming is done on M7310, M7324 and T7316 sets.
To set up line appearence you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt,
press the show key (top right arrow).
The display should now ask for an extension number. Enter extension number you wish to program the new lines on.
Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should say line 001: appear & ring
press the next key (bottom right arrow) till it says 003:unaaign.
press the chng key till the screen says appear&ring
Press the next key(bottom right arrow)
The display should say line 004: unassign
press the chng key til the screen says appear&ring
press the Rls key when finished

Posted on Jul 03, 2010

cnavarro
  • 2460 Answers

SOURCE: By mistake I have pressed the program buttom, then

Press PROGRAM line 1 and dial 0 1 STORE

That brings back line 1 to the button.

Carl

Posted on Oct 10, 2010

Testimonial: "FANTASTIC"

cnavarro
  • 2460 Answers

SOURCE: We have an old Meridian

A couple of thoughts. What happens when you ask about line 2 (as in Feature *0 and press line 1 then line 2 etc to see what it says). If line 2 is really there, and you can PICK UP but not see it ring, it could be programmed as Appear Only in system programming. If L2 doesn't appear at all, although it's highly unlikely, it could be that your phone is only told to have ONE line. Again that's a system program.

The admin instructions should have all of the access codes and it's just a stepping process to program terminals and sets.

Carl

Posted on Jun 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Meridian M3820 - why is display not working


Try another 4 wire phone cord from the wall jack to the phone it is possible that you have a bad cord. These phones will only work with a Meridian System .2 wires are line ,the other 2 wires are power to the phone. If you have another phone try plugging it into the same wall jack to check the jack/line itself. Anything else would be a defective phone/ lcd ( note you can have dial tone without display, but the unit will only access one line.

Feb 19, 2015 | Nortel Meridian M3820 Corded Phone

2 Answers

How to program feature buttons on meridian 7310?


Go to 7310 set you wish yo program leave handset on hook push feature star 3 then the button you wish to program then feature and
the code you want ex:feature 0 is speed dial that key will now be
programmed for speed dial. You cant program line keys or intercom keys.

Sep 02, 2014 | NorStar Meridian M7310 Phone

1 Answer

All of a sudden the line lights on our nortel switch Meridian M7310 phones started blinking and the lines are dead. Any ideas?


If you only have one line,why not just lose the Nortel system? You can reuse the wiring from the phone sets to the contoller as regular inside wire,and just plug in regular phones(and maybe put the Nortel phones and controller on EBay and make a few bucks off it!)

Oct 26, 2012 | NorStar Meridian M7310 Phone

1 Answer

I can not access my main line


If a system defaults programming it assigns only lines 1 and 2 to each set.
You either had this issue or somebody removed line 3.
Call a tech in to program.

Aug 01, 2012 | NorStar Meridian M7310 Phone

1 Answer

Cannot dial out on my Meridian 9516 telephone


Is the Program button on . If it is turn it off. You can also try resetting the phone by unplugging the silver line cord from the phone or the wall jack and then replugging it after about 10 seconds.
see if that works

Sep 03, 2009 | Meridian Two-Line Corded Business phone

1 Answer

Line buttons showing wrong phone lines


When a phone has only 2 lines, it's not programmed. By default, a Nortel system has 2 lines and that's all. Go into system programming and assign the number of lines and intercoms to a phone. After that, you can copy the buttons from a working phone to the new phone and you're done.


Carl

Jun 22, 2009 | NorStar Meridian M7310 Phone

1 Answer

Meridian M7208 Phone-Only 2 lines are working


Sounds like it might be a telco problem. Do lines 3 ,4 work on the other phones?
Switch lines 1 and 3 to see if the problem changes.

Apr 22, 2009 | Nortel Meridian M7208 Corded Phone

3 Answers

No ring and appear on my Norstar M7310


This should work on M7310, M7324 & T7316

Feature ** 266344 - password 266344 - configuration - line data - line access - show ext (yours) - line assignment ( which lines you have, usually 1 & 2) - show line - appear only/ring/apprear and ring

Hope this helps

Oct 02, 2008 | NorStar Meridian M7310 Phone

2 Answers

Meridan 7208 help please


Dear sheryl498,

Your phone is designed for a PBX (Private Branch Exchange) unit like the Compact ICS or the 6x16 TCU that was at the office. It is not compatible with regular POTS lines or standard home lines.

Jul 29, 2008 | Nortel Meridian M7208 Corded Phone

Not finding what you are looking for?
Meridian Two-Line Corded Business phone Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Meridian Phones Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

kakima

Level 3 Expert

96576 Answers

ray gallant

Level 3 Expert

36333 Answers

Are you a Meridian Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...