Question about Maytag PAV2300 Top Load Washer

1 Answer

Will not spin out heavy loads, stated by not balancing 2 mos ago

The washer would not balance any load at first, I would have to do it on every spin cycle. Now it won't spin out the excess water unless it is a very small or light load. It will spin, just not at maximum speeds to finish the wash properly.

Posted by on

  • jwdoc11 Mar 04, 2009

    The washer will not spin unless there is a very light load. It also makes a very loud noise and seems to move too much.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The transmission is shot after 20 loads a week for 4 and a half years

Posted on Oct 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Spins out of balance even emty


http://www.askmehelpdesk.com/plumbing/whirlpool-out-balance-spin-cycle-18991.html
http://fixitnow.com/sbrvrs/washers.htm

http://www.repairclinic.com/Washing-Machine-Troubleshooting


This model of washer does not have an out of balance cut off switch. If the load is not balanced properly the tub could hit the cabinet sides. If the unit spins evenly while empty & out of balance while loaded, I recommend checking & balancing the load. If the basket spins out of balance while empty, I recommend having the suspension springs & balance ring checked. Be sure not to wash light fabric with heavy fabric clothes. Also ensure that the adjustable feet are level, that's most important.

Aug 01, 2010 | Kenmore 24032\24036 Top Load Washer

1 Answer

Washer spins than it gets off balance and shuts


Hi, Washing machines can become unbalanced when the wash load has too much weight in one area of the basket. A machine in good working order can handle most problems through its balancing mechanisms. However, when washing heavy single items such as comforters, the machine's tub can become so lopsided that it damages the washer.

Washing machines that get unbalanced can shake, make banging noises, and even more across the floor. When machines are secured in one place, they can vibrate and bang so much the entire house shakes and things fall off shelves. This is not good for the washer. Bolts can come loose, and parts can break.

When washing heavy items such as pillows or down coats, stay near the washer so you can correct any balance problems as they occur. Some washers have an automatic shut-off feature when they become too far off-balance. If yours does not, stop the spin cycle, open the lid, and redistribute the load. If this is a continuing problem, you may want to wash heavy items at a coin-operated laundry in a heavy-duty machine.

Take care














Jul 14, 2010 | Whirlpool Washing Machines

1 Answer

Front loader tub out of balance


Try running the washer with a small load. Still out of balance? Call a technician.
A very large load or a load with one heavy item is hard to balance. For example, one pillow cannot be spun but two can. Lots of jeans may not spin well. Wash a towel with the jeans.
Check the manufacturer's website for more help.

Mar 22, 2010 | Frigidaire Washing Machines

1 Answer

Making a loud noise when on the spin cycle and not balanced


It could be a drum spring has broken or stretched too far, there is too much of a heavy load in the drum, or the bearing needs replacing.

Sep 11, 2009 | Kenmore 3.8 cu. ft. HE3t Front Load Washer

2 Answers

Comes up with the sign UE ??


Hi

Thanks for using FixYa. The error code UE means there are some heavy clothing is loaded. Rearrange items to help balance the load. If the imbalance is heavy, the washer will make several attempts to restart the spin cycle. If an imbalance is still detected, the washer will stop and will display the error code UE. In case, if the load is small then you need to add 2-5 clothes to balance the load. If the load is out of balance then you need to rearrange the clothes to balance it. Although the Washer has an imbalance detection and correction system but if still the problem persists then it means that it is due to control error and needs to replaced preferably by a qualified service technician.

Please do rate the solution and revert for further assistance.


Thanks
Rylee

Sep 09, 2009 | LG WM-2277HW Front Load Washer

1 Answer

The machine stops after the wash cycle and won't finish.


The code is UE

load too small.
• Load is out of balance.
• The washer has an imbalance
detection and correction
system. If individual heavy
articles are loaded (bath
mat, bath robe, etc.) and the
imbalance is too great, the
washer will make several
attempts to restart the spin
cycle. If an imbalance is still
detected, the washer will stop
and the error code will be
displayed.
• Add 1 or 2 similar items to help balance the load.
• Rearrange items to help balance the load.


please rate this help to keep the service online

Aug 20, 2009 | LG Washing Machines

1 Answer

My 9150 doesn't spin well and my clothes are very wet, when they come out. Then when I try to spin & drain only, it wants to run for 4 hours. Looking at the problems how good of a product did I buy.


from the description you are giving, i would guess that: 1. the "coin-catcher" ahead of the pump is plugged. 2. the tub is overloaded. 3. the loads are heavy, bulky [ blankets, jeans, towels]. when a load is too big or it is all very absorbent materials, the machine tries to balance the load before it goes into a final spin, it will not spin on high if it cannot balance - remember, ten towels or pairs of jeans soaked with water is darned heavy - mix the loads i'm familiar with this machine because i have one, i repair washers and dryers as part of my job, in my opinion, the duet is the best and most reliable washer available

Aug 18, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

My washer is perfectly level but during the spin


if you can make it rock by hand or by jumping the legs are not adjusted proper.it can also rock if the floor is soft... then get thick plywood under the washer ....11/2 inch should be good.you should try to balance the load put heavy things in first

Aug 04, 2009 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag Washer MDE7400AYW goes off balance while spinning about half the time. Walks across room. Springs are OK. Tub seems very easy to move from side to side by hand.


Typically when the drum spins and walks the washer, it is a loading issue.
As the clothes spin, they collect on 1 side, due to cintrifical force acting upon an uneven load.
THis is especially prevalent in loads that are:
1. small,
2. contain lots of towels and
3. anything else that really holds water and is very heavy when wet (like comfortors, pillows)

These will very quickly throw the load off-balance.

When it happens, pull out some of the itmes, and re-load the laundry more evenly around the drum. Be sure to circle the post with towels and sheets, etc.

If you continue to run the machine off-balance for an extended time, the bearings and seals will wear quickly. Unfortunately, you will only know this when the washer begins to leak out under the machine onto the floor.

Hopefully this will fix-ya....if not let me know please!

Nov 07, 2008 | Maytag Washing Machines

1 Answer

Beeping on spin cycle


It is most likely out of balance, could be for many reasons.
1 could be too many heavy items such as jeans, towels, etc in one load.
2 could be the machine or floor is unlevel.
3 Could be a balance sensor needs replacing.

Mar 09, 2008 | Bosch Nexxt 100 Series WFMC1001UC Front...

Not finding what you are looking for?
Maytag PAV2300 Top Load Washer Logo

Related Topics:

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...