Question about Dymo LabelWriter 400 Turbo Thermal Printer

3 Answers

DYMO LabelWriter 400 Turbo Installed but gives error message when sending prints

DYMO gives an error message when sending it the test print. Won't function and is appearing to be an expensive paper weight. Help.

DYMO gives an error message when sending it the test print. Reinstalled software and drivers but still not working. Works fine on different PC. My Dymo Twin Turbo is the USB model. The USB connection is no longer recognized. I plug into USB ports and nothing happens; The printer is no recognized. The autoinstall mode is not entered....nothing happens. All my other peripherals plug into the same port and work fine so it is not the port.

I have downloaded the lastest software but when I get to the script asking me to plug in the Turbo Twin... nothing happens.

Any help?

jbpmd

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,250 Answers

Hi
is it working some times back on your pc
when it is connected to your pc and power on, check the usb status some times the port become disabled
or

yes if it is then you restore your pc back to the date when its working fine to do this go to program - accessories - system tools-system restore option

Posted on Oct 03, 2008

  • pankaj rautela
    pankaj rautela Oct 03, 2008

    also check port status when of the printer

    to do this go to control panel check printers - select the printer right click above the printer go to properties - check port - change it to usb port

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 148 Answers

UNINSTALL THE DRIVER ON YOUR PC, REMOVE ALL THE CONNECTIONS AND THEN RESTART THE PC.. AFTER THE PC REBOOT CONNECT AGAIN THE USB CONNECTIONS AND INSTALL AGAIN THE DEVICE DRIVER...

KEEP US UPDATED.

Posted on Oct 03, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dymo Master
  • 19,396 Answers

First of all, on Dymos you need to use original Dymo roll,.

Dymo rolls have a tag at the back, non original ones does not have it.

Before reinstalling driver you also need to run the dymo uninstaller utility that you find at Dymo website.

I will post the links for download.

Posted on Oct 03, 2008

  • Ginko
    Ginko Oct 03, 2008

    Here is Drivers and Downloads for your printer, for direct download driver and software only Click Here.

    Before reinstalling drivers, unplug printer and use DYMO driver uninstaller software

    Here are recommendations from Dymo on how to proceed:

    "Download and install instructions:
    After downloading one of the files, unzip the file to a location.
    Double-click the file install.exe and follow the online instructions.

    Important notice when upgrading to or reinstalling DYMO Label Software.
    Always uninstall previous versions of DLS

    Important: When reinstalling or upgrading: the Label Files folder is
    replaced. Your own customized labels, stored in the Label Files folder
    (default is ..C:\Documents and Settings\All Users\Documents\DYMO
    Label\Label Files), will be deleted."





    Check also
    https://dymo.custhelp.com/cgi-bin/dymo.c...*&p_topview=1">USB Connected LabelWriter Fails to Print

    If you still get troubles after installing your Dymo in the correct way, and using original rolls then contact Dymo, if the printer is faulty they often offer a replacement even when the printe is not under warranty anymore.

    Here is Dymo contact.


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My MX922 printer worked well this morning. All cartridges have ink but ALL lights under the cartridges are on and print comes out blank. There are no error codes or anything abnormal displayed


This problem is mainly happens to all inkjet printers. If your printer print blank pages then please at least once go to official site of Canon and check whether there is any printer/scanner drivers update is available or not. If yes then download it. Also check your ink cartridges. Because if there is no print on paper that means your ink might be dry.Sometimes it clog the print head. If your ink cartridges get dry change it. Or you should clean your printer's print nozzle by using printer's control panel. I hope all these suggestions helps you. If doesn't then watch Canon MX922 Manual English

Jan 12, 2017 | Canon Pixma MX922

1 Answer

BROTHER P-TOUCH IS not printing


It is obvious it has a failed electronic component, since these are not repaired/exchanged except when they are under warranty best thing to do is just replace it.

Jan 09, 2017 | Brother Office Equipment & Supplies

1 Answer

Need to change font size larger when printing


Change the font on your document before printing

Jan 12, 2015 | Office Equipment & Supplies

3 Answers

My Epson WF-3640 is printing with gaps in the text. How do I fix this issue?


Make sure you should remove shipping tape from the ink cartridge. These taps are used to protect printer during shipping but you have to remove it before starting printing. Beacuse these taps prevent the ink to entering in print head. If you will not found shipping tape in your printer then there is terr off strip, remove it. The tear off strip seals the the vent holes on the top of the cartridge to prevent it from drying out on the shelf or during shipping.
After ensuring that the shipping tape has been removed, run the printer's "Head Cleaning" utility to prime the cartridge, then print a test page.
See full detail at- http://guideusermanual.com/product-name-workforce-wf-3640-manual&po=152836&lang=English

Sep 18, 2014 | Epson WorkForce WF-3640 Wireless Color...

1 Answer

"Error sent to printer" problem with ZDesigner TLP 2844


have you gone to printers in control panel and made this printer with a tick in it so its the one the computer recognises

Dec 24, 2011 | Office Equipment & Supplies

1 Answer

My fax wont work in my ricoh aficio 1515 mf??


Using the 1515 as a fax machine is a pretty simple procedure if everything works right. All you have to do is hook a working phone line up to the phone jack on the back of the copier (the one labeled LINE, not TEL).

Why won't the fax work? If it is giving you an error message, what is the message?

If you are not getting a dial tone when faxing, unplug the fax from the phone line and plug a working phone in, and see if the phone gets a dial tone. If it doesn't, there is a problem with your phone line.

You can also try plugging the fax machine into another phone line. If the fax works on that line, then there may be a problem with the first line.

Are you having problems sending faxes or receiving them, or both?

Jan 05, 2010 | Office Equipment & Supplies

2 Answers

Okidata Microline 30 Turbo dot matrix


The problem your having is a spacer motor. It's located under the carriage that holds the ribbon/printhead. The part number is 56513701. Available at Seattle Platen - Dale 1800-221-2388.

Here's a free copy of the Okidata 320T service manual that will walk you through testing and verfying before ordering the replacement part.

If this helped you, please hit me up with a FIXYA. Thanks.

http://www.feedroller.com/Store/Service%20Manual/SER320T.PDF

Aug 30, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

9 Answers

HP Photosmart C5180 will not read new ink cartridge


Excuse me--but I would like hp to have a look at this series and come out with a statement.

I did call someone in computer repair i think he said they cannot fix it (I don't remember that part)--but (this I do recall) that it probably needed a sensor to be replaced.

I have another bone to pick with hp--revealing: I did use the quick set up format and did not watch any dvd s on it if they gave them--

one thing I've guessed from all of this--there are several colors that get used up awfully fast, and yellow is one of them--even when we have our default set for black. double check yourselves: I believe that their nice black is created with yellow and other colors as well as the black cartridge.

Since I cannot say whether this was revealed in any of the handouts or an instructional video, if there was one--I don't know that they didn't tell this outright.

To be truly user friendly--I don't think that sort of information should be so buried that a casual user wouldn't know that.

(Sure it makes what they more impressive if you don't know how they do it, but I'd like to think they want us to choose easily what colors we are using, especially when printing 'black' ink!)

Feb 02, 2008 | HP Photosmart C5180 All-In-One InkJet...

Not finding what you are looking for?
Dymo LabelWriter 400 Turbo Thermal Printer Logo

1,277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dymo Office Equipment & Supplies Experts

yadayada
yadayada

Level 3 Expert

67930 Answers

Ed Mac

Level 3 Expert

731 Answers

Jax Planet
Jax Planet

Level 2 Expert

921 Answers

Are you a Dymo Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...