Question about 2wire 2700HG-B Router (2700HGB)

1 Answer

2700HG LAN configuration

We are trying play LAN games via 2700HG, but we cannot see each other in games, please help me to solve this issue,thanks! OS:XP

Posted by on

  • owen_shan Oct 03, 2008

    thanks,I'll try it

  • owen_shan Oct 05, 2008

    OK, I appreciate you a lot!


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,689 Answers

Common to all routers were you cannot see each others in the network...

here is a work around:

1. try to do a ping test from one computer going to the others and round-robin, find which one cannot pass.

2. set a statis IP address on each cameras grasually stiking to numbers lower than the DHCP server start address. so if your IP address not is, go for a statis IP address of and below.

3. firewalls, you may want to turn them off since you have a router, which is someone a good enough firewall for its SPI and NAT. BUT... do not turn your anti-virus off, just the firewall.

4. last resort, turn off your anti spyware, establish a communication, then start adding each computer under "My network computer" then turn it back on.

hope this helps, if you have other questions just lemme know

Posted on Oct 03, 2008

  • marlon john madrid
    marlon john madrid Oct 03, 2008

    no problem owen, if you have other questions just lemme know, you can even give me your email address and I will forward you some useful information about networking,

    or you may try logging on to "my articles"


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

The CD is not available for installation is it necessary? I have all of the cable if the Yellow cable connects to the cable router what does the white cable on the wireless router connect to. Thank...

If the cables supplied have RJ45 connectors then they are used for connecting and configuring the wireless settings in Netgear router and to connect the Netgear to the DSL modem foe Internet access.
Most likely the color of the cables is not important.
To configure the wireless settings, connect a cable from one of the LAN ports (not the WAN/Internet port) to the LAN port on your computer. You may remove this cable after configuring the wireless settings if you want to connect to the Netgear by wireless only. You need to connect other computers to the Netgear's LAN port with a cable if they do not have wireless cards installed in these computers.

The other LAN cable is used to connect the Netgear WAN/Internet port to the DSL modem so you computers can connect to the Internet via the Netgear router.

Follow these instructions to configure the Netgear router.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :-

Feb 23, 2011 | NetGear WGT624 Wireless Router

1 Answer

I have a 2Wire 2700HG-B router that has been working fine between my desktop, printer and laptop. But recently I have lost the inability to print from the laptop and I have no idea what to do. Can you...

You may perform reset and re-configure the settings and crendentials. If issue persists you may post again by indicated symptoms. Like blinking lights etc

Jan 25, 2009 | 2wire 2700HG-B Router (2700HGB)

2 Answers

I have a 2wire router from AT&T, all lights are green, except the "wireless" light. It's not on, how do I become wireless?????

Hi dilex
The 2wire router wireless light comes only when a system is connected to it wireless.

Please post the system that you are using and also what exactly when you try to connect via wireless.

Thank you
Dell Laptop Expert

Jan 06, 2009 | 2wire 2700HG-B Router (2700HGB)

2 Answers

How to connect the 2wire2701hg-b

connect via an RJ45 lan cable and open up internet explorer and type in the web address

Aug 17, 2008 | 2wire 2700HG-B Router (2700HGB)

1 Answer

Configuration not accesible

Hi There.

You may try to ping the IP Address of your router just to check if it is responding to pings. If you still can, check if there is proxy settings enabled on your browser, you may try to disable it by going to Internet options> connections> LAN settings.

Or try to use another browser to access your router. Lastly, sometimes, it does really work when you do it via RUN command on the computer.

Hope this works

Aug 03, 2008 | Belkin (F5D5231-4) Router

1 Answer

Can't get connected

try reset switch on back unplug it al then back in try again

Feb 04, 2008 | 2wire 2700HG-B Router (2700HGB)

1 Answer

Router help!!!

open the internet explorer.

Go to Extra then Internetoptions

Tab connection

Change phone in lan

Problem should be solved.

Jan 23, 2008 | 2wire 2700HG-B Router (2700HGB)

3 Answers

Acquiring network address

From the PC you are trying to connect to your wireless router LAN there are two possible causes of these problem.

1. No DHCP Server Available.
2. You are using MAC Filters and the MAC is not defined in the router configuration.

Please verify this and you can easily get through it.

DHCP can be configured over your wireless router also incase you don't have DHCP Servers in your LAN / WAN. Other wise you can go for manual IP addresses.

Jan 04, 2008 | Linksys WRT300N Wireless Router

1 Answer



My name is Laxman.,

Please check this link, you can get some information about the port-forwarding in 2700HG-B Router (2700HGB)

Please feel free to ask, if you have any further questions. I can answer as much as I know.

Nov 14, 2007 | 2wire 2700HG-B Router (2700HGB)

Not finding what you are looking for?
2wire 2700HG-B Router (2700HGB) Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top 2wire Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers


Level 1 Expert

15 Answers

William Dehn
William Dehn

Level 3 Expert

318 Answers

Are you a 2wire Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides