Question about Toshiba 32A33 32" TV
Not sure if its a loose connection but the tv volume will go all the way to 0 and cant get it to go up . every now and then it goes all the way to 100 and cant get it to go down is it a loose connection if so where is the most likely place it is.
Thank you so much cardpsycho! I couldn't find a piece of plastic to wedge the button down, but I taped a penny VERY tightly over the TV/VIDEO button on the set to keep it depressed, and voila!!! FIXED!
This problem had been so annoying that we couldn't stand to watch TV (ours would get stuck on full volume), and worst of all, the World Series is coming soon!
Posted on Oct 04, 2008
Ie pde,,,ano ung volume n my solution project ko lng ^^
Posted on Oct 15, 2008
Tips for a great answer:
on the TV and grab the remote. In most cases, you will need the original remote
to unlock the TV if you aren't sure of the unlock code. If you don't have the
original remote, you will need to purchase one.
at the screen. If you see a blank screen with a red key on the bottom of the
screen, press 'Function' and 'Mute' at the same time. This should unlock the
channel. This is an option for people who want the TV to stay locked but, want
to be able to bypass the lock to watch a certain show or channel. All other
channels will remain locked and the TV will fully lock when it is turned off.
all of the channels on the TV by entering the factory reset code. There are
three main reset codes that TV manufacturers set. These are 0711, 6688 and
3308. Try each one until you find the one that works. This will reset the TV to
original factory settings. When you do this, you will loose any information
that you have stored in the TV, such as favorite channels, automatic timers and
the clock. You will have to go through the full initial set up.
the technical support service number in your owner's manual if none of those
codes work. A technician can help you troubleshoot the television because the
problem may not be the locking control. When you call, make sure that you have
the model number and serial number of the TV.
Take your television to a TV repair shop. In some cases, a
professional who access to wiring diagrams for your television set may have to
rewire certain components in order for the television to unlock. This is
usually the case when the TV locks by itself while it is on.
Check this method too. If neither of them help you, check this link.
Disconnect the AC power
for at least one minute to reset the clock.
Adjust the volume to the minimum using the Volume down button on the front of the unit.
Press and hold the Volume down button on the front of the unit and the 0 button on the remote control at the same time, holding them down for at least 10 seconds.
The user menu will appear with the V-Chip cursor blinking.
Press the ENTER key on the remote control and the NEW PASSWORD menu will appear.
Enter your new password.
Jan 05, 2013 | Standard (CRT) Televisions
Mar 23, 2011 | Orion1934 19" TV
Mar 13, 2010 | Toshiba 32A33 32" TV
Apr 25, 2009 | Sony FD Trinitron WEGA KV-32FS120 32" TV
Mar 10, 2009 | Orion1934 19" TV
Jan 25, 2009 | Orion1934 19" TV
Jan 23, 2009 | Orion1934 19" TV
Jan 18, 2009 | Orion1934 19" TV
Nov 01, 2007 | Standard (CRT) Televisions
Jun 11, 2006 | Sharp 25N-M100 25" TV
1,310 people viewed this question
Usually answered in minutes!