Question about Office Equipment & Supplies

1 Answer

RE:canon Fax B120 ##342 error message

Hi,
Have you found the solution for the canon Fax B120 ##342 error message?
If yes, mind sharing the solution, thank alot:)

Posted by on

  • Mike Berja
    Mike Berja Nov 04, 2008

    I have the same problem every time I insert paper for copy there is always appearing "check printer"

  • Anonymous Nov 27, 2008

    canon Fax B120 ##342 error message problem

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

....
1.) press function then # u reach SERVICE MODE
2.) arrow right until TEST MODE confirm with Start / Enter (green button)
TEST MODE [1] - [8]
3.) press # ... u reach AMI MODE [1] - [*9]
4.) press 7 ... u reach FACULTY [1] - [6]
5.) press 6 ... .u reach LOST INK CHECK...confirm with green button...
u get [1] - [2]....
6.) press 2 u reach SET LOST INK CNT....confirm with green button...
u get LOST INK = 100 (in my case it was 100 ..this was the error..)
7.) press 0 (the digit zero..) confirm with green button...
8.) wait a few seconds....the unplug and reboot....

this worked in my case....

Posted on Nov 13, 2010

  • lestari23
    lestari23 Mar 15, 2013

    tank you so much, its work too

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

BROTHER P-TOUCH IS not printing


It is obvious it has a failed electronic component, since these are not repaired/exchanged except when they are under warranty best thing to do is just replace it.

Jan 09, 2017 | Brother Office Equipment & Supplies

1 Answer

How do I connect two computers to my Canon MX3520 printer?


in the control panel where you see add a printer, you have to add the printer to each computer then click on the share printer box

Jan 09, 2017 | Canon Office Equipment & Supplies

3 Answers

How do i solve an error e000-0000 canon ir 2202 please


Dear
Its related to the fixing temp. do the error clear on service mode. then check the fixing film assy. heater circuit contact points for corrosion. Replace it.
Thanks.

Dec 12, 2014 | Canon Office Equipment & Supplies

1 Answer

Hp laserjet m1522f error 5 turn off and on


Hi, Error 5 is a Scanner error. When turning the printer on, have the lid up so you can watch the scanner movement. Does it move smoothly? It should go through a warm up and you should be able to watch the scanner movement. If there is a problem with the scanner, there isn't a lot you could do except. The service manual says the scanner assembly should be replaced. If it was my printer, I would try to take a closer look at the scanner assembly and check to see if the scanner unit is bound up somewhere, or maybe a drop of 3 in 1 oil on the scanner rails. Let us know what happens.
thanks

Oct 02, 2013 | Office Equipment & Supplies

1 Answer

Error code 3501


HI
I HAVE KONICA C6500
ERROR CODE 3501 and 3802 but know the error 3501
I know it rech high temperature I change the sensor 1 UP fuser roller
and I reset the error, the machine start and stop again with error 3501

Oct 01, 2013 | Konica Minolta Bizhub C 6500 Copier

1 Answer

Canon pixma mx 922 will not scan


This happen due to poor version of drivers.Make sure that you install latest drivers. If you don't have then download it from PIXMA MX922 Canon Software Driver
For more help or guidance check Canon MX922 Manual English

Jul 28, 2013 | Office Equipment & Supplies

1 Answer

My fax wont work in my ricoh aficio 1515 mf??


Using the 1515 as a fax machine is a pretty simple procedure if everything works right. All you have to do is hook a working phone line up to the phone jack on the back of the copier (the one labeled LINE, not TEL).

Why won't the fax work? If it is giving you an error message, what is the message?

If you are not getting a dial tone when faxing, unplug the fax from the phone line and plug a working phone in, and see if the phone gets a dial tone. If it doesn't, there is a problem with your phone line.

You can also try plugging the fax machine into another phone line. If the fax works on that line, then there may be a problem with the first line.

Are you having problems sending faxes or receiving them, or both?

Jan 05, 2010 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

2,297 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

98921 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

64286 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...