Question about Audio & Video Receivers

1 Answer

I have HP Multimedia Speakers. No sound comes from speakers. computer says Realtek digital output...Realtek high definition audio working.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 142 Answers

If your speakers are powered speakers i.e. they plug into a wall outlet\has a red power LED etc...then unplug the input wire from your computer. Turn the volume all the way up on the speakers. This'll sound silly but it works. Lick the tip of your finger and tap the input wire tip with your wet finger. You will hear a "Pop" come from the speakers every time you touch the input wire to the speakers. This tells you the speakers are working and your computer is to blame. Good luck!!

barneyluc

Posted on Oct 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does change sources audio to PCM mean


PCM or Pulse Code Modulation. It's basically the form of sound that digital sound is decoded into to be outputted to the speakers. In the case of Blu-Ray, it is high-bit rate uncompressed audio that should be significantly better than the standard compressed Dolby Digital track. So change audio output on your device to the HDMI output

Dec 03, 2014 | Audio & Video Receivers

1 Answer

Can I run 6 ohm speakers on my amp avt5000


Hello
You can run speakers in the range of 4 to 16 Ohms impedence with this amp. As the impedece go high, output will come less and sound quality will go up and vice versa. Never connect speakers of impedence less than 4 Ohms with this amp, as they will overload the audio output state. OK.

Sep 19, 2011 | Harman Kardon AVR 55 Receiver

1 Answer

I have no sound coming out of receiver all of a sudden. Connected speakers to another radio and speakers work fine. Everything looks fine on receiver just no sound. Oh, and the mute button is not on.


It is an indication that you have a faulty output ic.
Output ic is responsible for amplifying the audio from your reciever to sound output which is converted by your speakers.

If you're output ic is defective then definitely you haven't sound produce even your unit is working.

I've advice you to look for a qualified technician to checked the condition of your output ic and do some re-soldering for some dry joints on the board.

Thanks for using fixya...

Jan 09, 2011 | Sony STR-DE335 Receiver

1 Answer

Sony STR-DG510 hook up with BDP-S560 no sound


The Sony manual for this receiver is not wrong, it is just a little misleading.
It does in fact use HDMI but ONLY for the HIGH DEFINITION video portion of the signal, as output from the receiver to your television. High Definition Multimedia interface carries both audio and video, however, your receiver is not decoding the high definition AUDIO portion of it and passing it through the HDMI, nor is it passing any form of multichannel audio through HDMI. So you can see why the receiver is no longer available for sale from the Sony website. The HDMI connection on your receiver is redundant unless you are not using a multichannel audio format, in which case you would be using either the TV speakers or connect an additional audio cable from the TV's "audio out" back into the receiver for external speakers.
All that should be done is use the HDMI cable from your blu-ray player connected directly to your TV. That will give you your picture, and possibly a better one since the receiver will no longer be in the signal path.
Then connect either a coaxial or optical cable from the blu ray player to the receiver for your audio. You will then be able to have Dolby Digital and DTS surround formats.
Your service person was wrong.

Jan 17, 2010 | Sony STR-DG510 Receiver

2 Answers

Yamaha HTR-6030: all speaker have sound coming out but it is not true surround. The display only shows front speakers on, how do I get all speakers to come up on the display?


I think you mean the display only shows Front >>Channels<< available.

What source? Digital or analog (analog is only stereo).

Dec 27, 2009 | Yamaha HTR-6030 Receiver

1 Answer

Connecting computer speaker to a receiver


Which output section of the Denon are you using? Tape monitor out? And are you getting sound through the speakers (not the PC speakers) that are attached to the Denon speaker terminals?

Oct 26, 2009 | Denon AVR-1601 Receiver

1 Answer

Digital optical output for technics 5.1 surround sound receiver


I went to the HDTV plasma manual. It stated the only way the digital optical audio output would work (from this TV) was to go to the menu, select audio and turn off the TV speakers. Basically, it had nothing to do with the technics receiver.

Sep 16, 2009 | Technics SA-DX930 Receiver

1 Answer

Noise coming out of speakers connected to Denon AVR 1908


Check for nearby wireless devices and move them away. -If the audio output from the source device (i.e. DVD, CD player) is digital (i.e. PCM, DTS or Dolby Digital) you're on your own. I'd be willing to bet the output is analog (red and white RCA), because the "beeps" and "exploding sounds" you describe seem like it could be caused by interference. Try replacing the cables. Otherwise the issue is probably with your receiver.

Aug 11, 2009 | Denon AVR-1908

1 Answer

XBox 360 to Reciever to TV via HDMI no sound


I recently got the same receiver and had the same problem. Here's what I was told - and it worked for me:

Even though HDMI cables carry audio and video, for whatever reason this reciever won't accept audio through hdmi. Apparently only much more expensive recievers carry audio through hdmi. What you have to do is run optical audio cables from your xbox, cable box, dvd player or other video device to the optical inputs on the back of the reciver. Then you customize the scene buttons to match your video and audio inputs.

You can get these optical cables pretty cheap on line or even at target. Don't get ripped off by Best Buy for these cables. I love best buy, but they rip off on cables!

This receiver is great - once I got it all figured out and running right I've loved it! Hope everything works out for you!

Mar 09, 2009 | Yamaha HTR-6130 Receiver

3 Answers

Xbox connectivity problem


As dumb as this sounds here is the mistake Sony made. The receiver does not process sound from the HDMI, it will only pass through that data to you TV. So you will not be able to get sound from your 5.1 speaker setup if you only connect the HDMI, you have to use the matching audio input for that respective HDMI input. Make sense? So the HDMI DVD Input must have digital coax for sound, HDMI Video2 must have fiber optic for sound, and there is another fiber optic port for the Sat input. Yes thats right, if you have 2 HDMI HD components and each only has fiber optic(neither one has digital coax) you cant hook both up properly the way you would think. Sony made this receiver poorly, turning High Definition Multimedia Interface into High Definition Multimedia Except For Audio Interface.

Nov 18, 2007 | Sony STR-DG510 Receiver

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68223 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Are you an Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...