USB device not recognised. One of the USB devices attached to tis computer has malfunctioned and Windows does not recognise it?

G'Day Mate,
Are you running the Lexmark driver for Windows 7 64 bit.
Try down loading the driver and installing it on your p.c.
Suspect USB driver for printer is missing - Windows can't detect it as it doesn't recognise it. By installing the Lexmark driver it updates windows to recognise the lexmark printer usb interface.
you will find driver here
http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_E332N&segment=SUPPORT&userlocale=EN_US&frompage=null#1

Assuming you have tried other usb ports and had no change,remove the usb connection, then go back into device manager and select the usb controller, right click and select delete as this will erase any input driver the usb port recognises. Restart the pc and then the controller should be reinstalled automatically as it sounds as though the controller has become corrupt for some reason. Go back into device manager and check there are no exclamation marks, reconnect the drive and see if it's recognised.

Here is the Link which can help you
malfunctioned

Reinstall the printer drivers again and see if the problem corrects itself or if you prefer roll the computer back to when the printer worked using System Restore. If this fails to correct the Issue time may have come for a printer upgrade unless this is a high end business printer, then have it repaired, home units are dirt cheap right now.

The problem you have stated can be due to several causes. Please eject your USB drive from your computer and insert it again. If windows does not detect it, then restart your computer and try again. If the problem is still there, please check the Device Manager if the USB port is properly working and if it is possible to use the troubleshoot. The best way to check whether your USB device is properly working or not, insert it to another computer other than your's. If the problem persists, check your USB device's warranty period and simply go for the replacement and contact your retailer or service provider.

You can go to Device Manger by following the steps below:

My Computer Icon>Right Click on the Icon>Properties>Device Manager

Thanks for using FixYa.

Hope this helps,

Mrityunjay.

Hi,
- Make sure you have been installed JVC driver on your PC - If your PC has multi ports USB, just try other ports to make connection - check your firewire, it may be malfunctioned . Try other USB cables

remove all the usb connection to the computer and insert one by one and isolate tthe non recognised device cange the usb por and reload the drivers while conectin you will see adding new hard ware and the name of the device if you dont see and it shows unknow device the udb device is fried

This might be because it not able to recognise the driver. Sometimes you need to install a drive for it recognise it.

sounds like a hardware driver issue with your cable or dsl modem. try running your software disk that came with your internet package.

This problem's caused by the usb cable which is may be long enough or ordinary brand. so change usb cable is solution of your problem