Question about Audio Players & Recorders

3 Answers

Rel Q50 SPEAKER

How to connect red black and yellow cables

Posted by on

  • kestrelkev Oct 04, 2008

    Sorry but that not what i needed

    i know its speaker + left speaker +right and any speaker - on the amp but not sure which one goes where



    kev

  • Yamah A595a Nov 06, 2008

    i have the same problem and dont have a clue wher to put the red,yellow.or black wire..
    HELP plz

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi ive got a 303 amp trying to connect it to a studio mixer there is only 3 wires coming from the amplifier white and red then black trying to connect to xlr plugs white and red to one where dos the black go thanking you jimmy

Posted on Feb 16, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Red/Yellow go to + connection on left and right speaker output and the Black connects to either (left or right) - connection.

Posted on Jan 06, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 125 Answers

This is very easy. The Red and Black(Sometimes white) are for your Audio Usually Left and Right respectively. Yellow is for Video let me know if that helps. there are some instances where if you plan to hook it up to a Television, specially the older ones, you'll find that you just have two inputs for only two cables so what do you do then. Well... Just hook up the yellow for the Video Par and Either the black or Red leaving one unused. Let me know how that works out for you alright. And feel free to ask more questions where we will be more than happy to assist you.

Posted on Oct 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi ! I have a Kenmore central vacuum (model # 34326), 3 inlet valves on different floors. the inlet valves on the second and third floors are already connected. I need to connect the inlet valve...


By your description it seems that You have telephone wire used. You only need two low voltage wires to complete the circuit to turn on the power to the central vacuum unit. The low voltage wires must be arranged so that when you insert the hose into any valve it closes the circuit. You will wire it as if the black and red are just one wire and the green and yellow are the other, they are actually doing exactly the same as if you only had two wires.

Mar 05, 2017 | Kenmore Vacuums

1 Answer

I just reconnected my haier television to the cable box and now the picture is in black and white not in color


U are using a AV RCA cable for the connections?Ur AV RCA cable connections all matches up like RED to RED,YELLOW to YELLOW and WHITE TO WHITE?Tried another AV RCA cable?Might even tries a HDMI cable for the connections?U tried all these still getting the same result no colors,just black and white.Than ur Tuner board is defective,must be replaced to solved this problems.

Apr 24, 2010 | Haier HLH406BB 40 in. LCD HDTV

1 Answer

How can I wire fluorescent tube light.There's 2 cables incoming through the wall.One has red,black and green/yellow.Other has red and black only.I've tried connecting both reds from the incoming cables to...


if you have 1 switch ! take the cabel wiv the yellow red black an green conect green to E earth , conect the to reds together that will feed the switch connect the black to the nutral on the light fiting and tape up the yellow not needed !,then take the cabel wiv only red and black , the red is connected to the other red as explaind above ,then the black is the return from the switch therfor connect it to the live tuminal on the light fiting MAKE SURE U TURN IT OFF AT THE FUSE BORD FIRST PLEASE!!!!!!!!!!!

Sep 29, 2009 | Hydrofarm Hydrorfarm Flco200d Fluorescent...

1 Answer

VHS to Easy capture to computer


The plugs you speak of are called RCA plugs, (Male side has an outside ring with "slots" around the edge, and a pin in the center. Female side has a short round "riser" with a hole in it). You need just standard Audio/Video hookup cables, available at any electronics store.. Walmart/Target/Kmart has them in the TV section. They get plugged into the Audio (Red & White) OUT of the VCR, into the Audio IN (Red & White) of the Easy Capture. The Yellow lead is for Video In/Out between the VCR and Easy Capture. The black is probably the S-Video connector, (round, has very small square hole, surronded by 4, 5, or 7 tiny pin holes) that can be also used to connect video/audio between VCR(if so equipped) and Easy Capture. Get a set of audio/video dubbing cables (abt $10 usually), connect Red to Red, White to White, Yellow to Yellow. Plug the Easy Capture USB cable into your computer (most likely), start the capture program. Start your vcr, hit Play. You should see your vcr tape playing on the computer screen.

Aug 18, 2009 | Televison & Video

1 Answer

Coby DVD-937 playing DVDs in Black and White


you did not connect it to the right port in you tv with the right cables. if it came with a cable using red, blue, and green wire you need to connect all three to the appropriate place on the tv in this case the red is a video cable and not audio they are white and black in component video... if it is the other way around you have a red white and yellow cable the red and white are audio and yellow is the only video and needs to be connected to a yellow jack on the television

Jun 23, 2009 | Televison & Video

1 Answer

Wiring/connecting wire from fan to home ceiling


Hi,

this depends on where you live UK/USA et,c or other.
It is best to search the manufacturers site, to find installation codes/colours.
i.e USA use a lot Of Black and white. UK uses Red/Black Green/yellow.
And on houses that are rewired to 17th edition electrics ( UK ) the colours have now changed on mains twin and earth household Wiring. What Used to Be Red ( Live ) Is Now Brown. Black ( Nuetral ) Is now Blue. green/yellow is earth.

*** Important Note:- you should have several reds in a ceiling junction box or light fitting, these are circuit wires. ( Live From Light to next light ) The same as with Black ( Nuetral )
There will usually be 1 switch wire/Cable. this feeds a live from the switch, to the live power up to the light. many homes use a twin core and earth, from the light switch to the fitting. this may be black ( if a black/red ) has been used. *** Do not connect a black Switch wire with the remaining neutrals***
This will blow a fuse or trip a breaker.

Your solution:- connect the black neutral To the Black neutral cables ( more Than 1 at the ceiling Rose/fitting ) if there is a green/yellow or green ( this will be earth ) You may have 2 remaining Colours Possibly red and Blue or other. The Red Should be the switched Live. ( the single cable Red/Black with red tape around It ) This will be the switched Live. The remaining cable would probably be connected to the Bunch of Reds ( Constant Live ) As ceiling fans require a constant and switched live ( if the fan has lighting )

If in any doubt, consult a qualified or competant Electrician. *****And always remove or isolate the mains supply before attempting any installation*****. After the wiring is complete replace the fuse or switch on the breaker, to test your installation.

This information, is supplied by a fully competant electrician.

Thankyou for using fixya.

Mike @ Compurepair.


Jun 15, 2009 | Hampton Bay 24002 Ceiling Fan

1 Answer

I am trying to connect an akai dvd player to directv, please help


ruettab,

good day. to connect your any DVD player to any TV screen always remember this color code

from DVD back part:

yellow = video out

red/blue/green( in a row) = component video out ( this can only be used for screen with component video inputs)


Black = digital audio ( rarely use unless)
Red and white (in a row) = Audio output (left and right audio)


where to connect from TV screen.

Locate where A/V INPUTS (audio/video socket) from your TV screen, you can see it either at the BACK/SIDE or somtimes in FRONT of TV screen , having marked as "AV1"AV2"AV3' .

Once you found TV input, you must first have RCA cable (color code cable to connect player to screen) then connect the RCA cable at the back of your DVD player, simply follow color code

RCA yellow marked cable = DVD yellow socket
RCA RED and WHITE marked cable = DVD RED and white socket (second row for your player)

then connect the other end of the RCA cable to TV screen, first select which input where you gonna place the DVD player ( either AV1, Av2 or Av3 if do have multiple inputs)

once decided which INPUT to connect the player.
ex. if you select AV1 as input there would be 3socket on its row (yellow/red/white)

now connect the other end of RCA cable to the screen by following the same color code:

RCA yellow cable = TV screen A/V1 input yellow socket
RCA RED and White = TV screen A/V1 input red and white socket.

cheers,
mark

Jan 31, 2009 | Akai DVD-3850S DVD Player

3 Answers

I bought a C80 Raymarine Plotter this has a NMEA pigtail with Brown, Screen, Yellow, Green And White wires I haave also bought a RS 125 Receiver this has a pigtail lead with Red , Green, Yellow, Brown and...


If you have a Raymarine pilot it makes sence to wire it all up to Seatalk. Wire as follows Red to red , silver to silver, yellow to yellow, brown(on rs125) to silver on seatalk buss Green (on rs125) to red on seatalk buss.The above is for the conection between RS125 and C80.
To hook the pilot to system you just need to hook the seatalk lines (red, yellow,silver) from the pilot to the conection with the RS125 and the seatalk cable to the C80.(Color for color).The sea talk connection for your pilot can be picked up from you course computer they are labeld and colored on the unit.
If you are not running a course computer as in the case with the older wheel and tiller pilots you will need to take a sea talk cable and cut it. Once it is cut you will see the red yellow and silver wires and you can tap into there . Remember to connect the cable back together were you cut it. Hope this helps

Dec 15, 2008 | Raymarine C80 GPS Receiver

1 Answer

Which cables go where???????


RED - YELLOW - GREEN - BLACK -----
1 3 5 7 9
2 4 6 8 10
RED - YELLOW - GREEN - BLACK -----

May 08, 2008 | MSI PM8M-V Motherboard

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

440 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

4861 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...