220 plantronics need passkey to pair with ps3

Pairing the Plantronics Explorer 220:

For most phones, select Settings/Tools, Connections, Bluetooth, On. See your phone's user guide for more information.

With the 220 headset powered off, turn on the headset by pressing and holding the call control button for approximately 5 seconds until the LED flashes red & blue. The Explorer 220 headset is now in pairing mode. If you don't see the red/blue flash, press and hold the power button to turn your headset off, and then press and hold the power button again and hold for 5-6 seconds until you see the red & blue flash.

From your phone, go to the Bluetooth menu and select "Search" or "Add Device". Your phone should find the headset which will appear as "2xxPlantronics" in your list of devices.

If prompted for the Passkey (PIN code), enter 0000. If your phone asks for a PIN/passkey, enter 0000 (4 zeros). Pairing is successful when the LED on your headset flashes blue. Your headset is now connected and ready to use.

Here is the link below for step by step instructions.

http://www.headsetsdirect.com/plantronics-explorer-220-bluetooth-pairing-instructions

Good luck from Headset Direct - 800-914-7996.

http://www.headsetsdirect.com/plantronics-explorer-220-bluetooth-pairing-instructions

Good luck from Headsets Direct - 800-914-7996.

Step One:
Prepare Phone-
Turn on Bluetooth
For most phones, go to Settings/
Tools menu and select Bluetooth
or Connectivity and select "On."
(Or see the user guide for your
phone.)
SETTINGS
Time and Date
Phone Settings
Bluetooth
Sound Settings
Network Services
Security
Reset Settings
BLUETOOTH
Discover/
Search
BLUETOOTH
220Plantronics
Headset Passkey
PASSKEY
0000
Step Two:
Prepare Headset-
Pairing Mode
Begin with headset turned off. Turn
headset on (hold call control button
for 2 seconds until the light flashes
blue) and it will automatically go
into pairing mode, flashing red
and blue.
Step Three:
Pairing-
Add Headset to Phone
For most phones, go to Settings/Tools
> Bluetooth > Search or Add a Device,
then Select "220Plantronics."
For passkey enter 0000. Headset
will flash blue when paired
successfully. It is now powered on
and ready to use.
NOTE: Normally you only need to pair the headset and handset once. If headset has been previously paired with
another device, follow pairing instructions on the next page.

The default code for Plantronics is 0000 (4 zeros). If you need more detailed instructions, visit their interactive pairing guide at: http://www.plantronics.com/media/media_resources/easytopair/

The default pairing code for Plantronics is 0000 (4 zeros). If you need more help, try their interactive pairing guide: http://www.plantronics.com/media/media_resources/easytopair/

For all the bluetooth headsets manufactured by Plantronics (except for the M1000 and M1500), the passkey (or pairing code, or bluetooth PIN) is 0000 (four zeros).
Hope it works for you.

Cheers! Carlos

you usually make up your own with bluetooth pairing. try 0000 or the like...

trying to install my plantronics 222 blue tooth head-set to my nokia 7610,but it keeps asking for a pass code.

Most passkey are 0000 try thay

The passkey is 0000. If you have a problem, reset the headset. Turn the headset off and hold down the call button for 8 seconds until the headset flashes blue and red signaling that it is in pairing mode for the next 120 seconds. While the headset is in pairing mode, use the phone menu to search for Bluetooth devices and select "220Plantronics." (If the headset is already listed in the Bluetooth menu, delete it before searching to pair the device.) When prompted for a passkey, enter 0000. Headset will falsh blue when paired successfully.