Question about Kenwood Audio Players & Recorders

1 Answer

Have a Kenwood Multiple Compact Disc Player DPM6010. Am trying to re-hook my sound system after moving from NC to OR. All is working except this unit. Have hook it up properly (Ithink, since I can't find the manual. When turned on it shows E 22 in the upper right of the display area, and will not play at all. Help! Thanks.

Posted by on

  • btuckerart Oct 03, 2008

    Thanks!!! We had about come to the conclusion that you have, so its nice to have that confirmation. We were hoping that we could push the right button and make everything OK. But at the same time, realizing that this unit is probably in the 20-30 year old range, we realized that it would probably be less expensive to buy a new one than to have it repaired! Which also is a pretty good testamonial on the quality of our sound system. The NAD receiver and tape deck are the same age, and they made the trip just fine and we are able to enjoy our huge collection of great oldies again.

    Thanks again for responding! We really miss NC, but love Oregon. Of course, we still get left and right mixed up, with the ocean on the wrong side of the state! Best wishes. Bruce

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 142 Answers

Does your machine scan through the discs? If so the you need a laser and should replace the unit. If you do not hear or see the unit shuffling throug the discs at initial plug in then you have a bad belt that drives the changer mechanism or during your move the mechanisms gear timing has been thrown off by the unit being dropped or bumped rather roughly. Either way it is more than likely going to be more cost effective to replace the unit. Sorry!! Too bad you're not in NC still. That's where I am. I wish you good luck!

barneyluc

Posted on Oct 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My sharper image 3 cd player will not change disc.


Does it play any disc?
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 07, 2017 | Sharper Image Audio Players & Recorders

1 Answer

Can't get my Kenwood VR715 receiver to go into the Select a speaker system to see if speakers are turned on. Followed manual instructions and can't get in. Any Suggestions.


Try resetting the unit by unplugging the unit from the wall, then plugging it in again WHILST holding the power on/standby button in. This should reset the system. If not:
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 06, 2017 | Kenwood Audio Players & Recorders

1 Answer

Kenwood VR-357 Audio Video Surround Receiver manuals


Try Googling (kenwood)(VR-357)(manual) without parens.

Jan 02, 2017 | Kenwood VR-357

1 Answer

Fix wind noise in speaker of my garrard 3006 mk 2 vintage record player,?


My question is, do you hear music when you play a record, or is only "wind" coming out of the speakers?
The player was build in 1964 with Germanium transistors. These transistors are known for their noise level. But in those days nobody noticed this, because all transistor amplifies had noise.

If there is no sound at all, only noise, it can't be that difficult to repair the amplifier. There must be some schematics around on the net. Be aware you need a Xtal PU element and it won't be easy to get one of these.
I found an interesting page on the net. It is a pity the schematic is not 100% clear.
3006 Mk Player Ferguson Radio Corporation Ltd London

Jan 14, 2015 | Audio Players & Recorders

1 Answer

How do I increase the volume on my record and cd player


Feed the sound into a really loud p.a. system. You can use a high quality Mic to get the best sound.

Jan 11, 2015 | Audio Players & Recorders

1 Answer

Why won't my CD Player won't play CD's?


the laser that reads the cd is probably dirty - if you have a can of compressed air - insert the nozzle into the cd player and blast away any dust and debris - if this doesn't help - there are cd cleaning discs available at any major retailer - just insert the cd and it cleans the laser - worst case scenario - buy a new cd player - the prices have really come down - I replaced mine with the trim kit and wire harness for $100 - only took about 1 hour - but you do need to buy the Ford stereo removal tools (available also at any good stereo store)
6e3dbb0f-b64c-469d-81da-cd7b00f9f3ee.jpg

Aug 22, 2014 | Audio Players & Recorders

2 Answers

Marantz how to connect 6005 amplifier to ipod


There are many solutions, I show two. The tip photo, shows a more expansive one. the lower photo the cheaper one. But both have two tulip plugs on the side for the amplifier and one 3,5 mm stereo telephone plug to the other side.
I tried both on a good stereo set, and could not hear different quality in sound. My guess, the quality comping from my iPods, iPhone and iPad is not the same as from my CD player. On the CD player, a better cable proved to give a better sound.


c25e6b72-61d1-4158-8864-9fee0335d5fc.jpg 0c90f720-e235-4415-a30c-8a9f98411676.jpg

May 26, 2014 | Audio Players & Recorders

2 Answers

Hi,Just purchased 2 antec gain Bluetooth receivers type bxr 100. Operating instructions are not included. Maybe it's just me, but i'm not succeeding in getting them to work. No lights at all when they


Make sure that the unit is fully charged by a micro USB the light on it will be red until it's fully charged put phone in search mode and press the center button until the light flashes red and blue after the phone finds it you should have an option to auto pair when it's not in use it will turn off when paired and working pressing either track button will start the music player then just play with the buttons and see what it does you can stop anything from the phone controls

Mar 18, 2014 | Antec BXR-100 Gry Audio...

2 Answers

Connect an active soundbar to a receiver


What if the soundbar is Bluetooth? Will I still be able to use that function and connect the active soundbar to the tv (Bluetooth) and connect the av receiver for other surround sound speakers? (they are pre-wired in the walls in the apartment I moved into)

Jan 08, 2013 | Audio Players & Recorders

5 Answers

BOSe Wave Radio - Disk "not readable"


I had the same problem with the disk unreadable error and took my unit to a authorized repair dealer about 100 miles from where I live to have it fixed. It ended up costing me about $300 to have the CD unit totally replaced which is almost as much as I paid for the unit in the first place. I am like a lot of you that used the CD very little although the unit was about 3 years old. I think Bose has a problem and would like us to think it is very rare. I bought a Lifestyle surround system about 14 years ago that has a CD and have never had a problem with it so needless to say I am very disappointed in the Wave II Radio/CD system. I am fairly certain the problem will occur again, but only time will tell.

Mar 03, 2008 | Bose Wave Radio

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4758 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Eddie Dalton
Eddie Dalton

Level 1 Expert

41 Answers

Are you a Kenwood Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...