Question about Denon Televison & Video

1 Answer

Denon dvd player freezes in the same place on certain dvd's also sometimes willnot start to play disc unless re-inserted several times. Model D-M51DVS

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 70 Answers

Sounds like its stoping during layer switch, if the player is old its needs to be cleaned. its best to clean it once every 20hrs or so. if you do not have a disk cleaner you should go buy one first. if the player is new return it and get the best dvd player you can buy for any amount the toshiba xde. this player is phenomenal, the best you will be amazed. no i dont work for toshiba but ever since they started making hd dvd players(i know they stopped)there players have become the best. trust me if you dont think so just return it. no harm done. if you want a blu-ray get ps3 I dont like them either but i have to admit after buying (for movies only)my third blu-ray player it is by far the best one. almost as good as the toshiba on standard dvd playback but not quite. good luck.

Posted on Oct 02, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a Denon DCD820 from the late 80's. This week I wanted to reuse it after remodeling my house and putting it aside for one year. When inserting a cd, sometimes it starts spinning and the shows the...

Couldn't find much for that specific Denon model but there is lots of info on basic CD player trobleshooting. If this video isn't helpful, do a youtube search or google "cd player troubleshoot"

Jan 08, 2015 | Denon Audio Players & Recorders

2 Answers

Denon 2910 CD player malfunctions

is this happening with all the cds??
the case may be with the cd sometime..where the tracks wouldnt have been properly completed...

Jul 13, 2008 | Denon DVD-2900 DVD Player

1 Answer

When i put in a dvd, it makes clicking noises, after that a notice

follow this steps and fix it. God bless you
Does not play disc
  1. No disc. - Load a disc into the tray.
  2. Disc has been loaded upside down. Place the disc with the label side up.
  3. Disc region code does not match region code of the player.
  4. Disc type is not the correct type to play.
  5. Disc is damaged or dirty. Clean the disc or try another.
  6. Moisture may be condensed inside the unit. Remove the disc and the leave the power on for one or two hours.

Nov 14, 2012 | Sony Televison & Video

1 Answer

Portable dvd player slows or stops

The pladder motor that spins the dvd disc is failing, or the 5volts to the motor is flutuating, usually the whole assembly is replaced and is expensive.

Jul 18, 2012 | Zenith DVP615 Portable DVD Player

1 Answer

Dvd reads disc inserted then signals "no disc" and does not self start. When attempting to start play using remote signal "Err" appears but still willnot play

This question is for a plain basic DVD player only wright?Yes.DVD player laser eye data reader it is dead.This is a basic DVD player only?Yes,not worth a cost of the repair.Because basic DVD player only,now are pretty cheap.Can get a new one for like $40 brand new.

May 24, 2011 | Televison & Video

1 Answer

My denon dvd player plays for about 30 seconds then starts over <can anyone help

purchase a dvd lazer cleaning disc from your local electronics supply compant and run it through the player several times this will fix the problem so long as the lazer is not fully burned out

best of luck

Nov 30, 2010 | Denon DVM-1805 DVD Player

1 Answer

DVD deterioration

I would blame it on the DVD player. They are fickle when it comes to playing burned discs. Try playing the disc in your computer. If does the same thing there, the disc is garbage. You can also try burning at a slower speed, sometimes this helps. I would also try to avoid using DL (dual-layer) discs.

Apr 09, 2017 | Televison & Video

1 Answer

JVC XV-THA5R multi-region DVD player - fault recognising a disc in and playing

I too have this same problem on my current DVD player, AND strangely enough I had the same problem on my previous player.
Previous player was made multi region and was a Sony S660 (I think that was the model number).
My current DVD player is a Denon and was £550! It is also made multi region and has the same problems! I don't get it!

Mar 08, 2008 | Televison & Video

1 Answer

Invalid disk message sometimes and machine lock up

coby dvd-233 cd wouldn't spin invalid disc is displayed on the tv please help me solve this problem

Jan 21, 2008 | Coby DVD-233 DVD Player

1 Answer

DVDM 1805

it sounds like you might need to clean the laser eye, try that and get back with me

Dec 10, 2007 | Denon DVM-1805 DVD Player

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

603 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75017 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

5318 Answers

Are you a Denon Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides