Question about Ariston Technologies AWD120 13 lb. Washer / Dryer Combo

1 Answer

Ariston a1600wd not working

HI my ariston a1600wd is not working its just sitting with the key symbol and the rapid light is flashing and thats all it does.please help.

Posted by on

  • donstapley Nov 10, 2008

    mine is doing exactely the same....could be a clogged filter (so ive been told) but i have no idea where the filter is as i haven't got an instruction booklet...due to fact it is the washer that our landlord left us!

  • andonandon Nov 22, 2008

    I have the same problem, i have been on a different site and found the manual which states if the LED's are flashing then call the service centre as there is an error, see link below



    http://imagebank.indesitcompany.co.uk/br...

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

There is a filter of sorts in the pump inlet pipe, its a big item catcher coins etc, but thats got nothing to do with the module error wich is a pricey item at £120! I've had one go already and in the last year, a inlet valve plus a control pcb panel in fact its almost a NEW machine! i'll never buy another hotpoint or ariston again. The machine is two yrs old!

Posted on Apr 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ariston LI640A 2nd and 4th light flashing


Usually this is a sign that you should call the repairman. However, I had a flashing light once because I made the mistake of trying to use my Ariston without turning on the water to it. I unplugged it from the power and let it sit for about ten seconds. When I plugged it back in, the flashing light was gone. I am not sure if this will help you or not but it is certainly worth the try.

Nov 15, 2013 | Ariston Technologies LI640S Dishwasher

1 Answer

Ariston1400wd will not switch on. LED lights on door lock, timer delay,and rapid are all flashing


Hi Alistair
The Ariston 1400wd unfortunately doesn't have a very good reputation. From what you've described it sounds like the main control board has a fault on it, but this will need to be verified by a competent technician because it is also possible (though a little less likely) that one of the sensors is sending back the wrong information to the board. I'm sorry, but really the best thing to do would be to get a technician to verify exactly what's going on with your Ariston, this can't practically be done by email.I wish you good luck with it and I'm sorry I couldn't be of more help to you.J Knol

Nov 01, 2011 | Washing Machines

1 Answer

Ariston L64 dishwasher first 2 lights flashing what does this mean please!


Ariston LI6401-Washed a load. Last light on R control panel (Eco Wash) is blinking rapidly and didn't dry the dished.Turned pwer off then on. Did same type of wash. New maching-This is about the 6th wash

Mar 16, 2011 | Ariston Technologies LI640S Dishwasher

1 Answer

My Ariston A1437 will start working as normal and then both the lock light, easy iron and rapid buttons flash and then the washing machine stops after about 3 minutes. Any help muchly appreciated!


I had this problem last year and had to call an engineer out. The problem was not with the washing machine but with the drainage pipe to the sink unit which had become 'backed up' with softener and the machine could not empty properly. 1 year on I now have the other 2 lights flashing and need to find out why. Any help gratefully received!

Aug 29, 2010 | Washing Machines

1 Answer

Ariston A1635 Margherita Control knob spinning


According to the instruction book - it appears the machine has been stopped mid cycle then re-started.
Switch machine off, turn control knob to a solid circle symbol (they are after every set cycle). Switch machine back on and lights will flash and program is reset. You can then select wash cycle as normal.

Jan 22, 2010 | Ariston Technologies AW125NA 13 lbs. Load...

1 Answer

Dishwasher, Ariston LI62, kept flashing on R


hi there.....this usually happens when the base of the machine is full of water.....switch the machine off ....remove the two plactic inspection panels at the bottom of the machine and dry out the base....check that all fittings and fixtures in the main cabinet are secure and not leaking..particularly the transfer tube from the wash pump to the upper spray arm..(machine needs to be pulled out of its position to check this as it is at the rear)

regards Sir Galahad

Aug 18, 2009 | Ariston Technologies AW125NA 13 lbs. Load...

1 Answer

Washing machine ARISTON A1600WD NOT DRAINING WATER


The drain valve is bad, replace it. hope this information could help you.

Apr 23, 2008 | Washing Machines

1 Answer

Ariston a1636 washing machine


I have the same problem, did this get solved for you?

Jan 08, 2008 | Ariston Technologies AW149NA Washer

1 Answer

Ariston washer/dryer. Dryer not working


probably 2 separate faults no heat is possibly either open circuit on the elements which are at the top of the machine, or open circuit thermal cut outs (up to 3 of) located also at the top of the machine near to where the element is and along the flow of the hot air, you can check these with a normal electrical multi-meter, unplug machine before testing as for the vibration on spin, just look for any loose suspension legs, and or twisted drum alignment, very difficult to work on due to lack of access but sometimes just re-tightening the legs up etc, could cure the vibration hope i have helped you to start somewhere take care to note in detail any wires or parts removed or in case of accidental removal

Sep 27, 2007 | Ariston Technologies AWD121WH

Not finding what you are looking for?
Washing Machines Logo

1,310 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ariston Technologies Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

64028 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Are you an Ariston Technologies Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...