Question about Pioneer DJM-600 Silver Professional DJ Mixer with Auto Beat Cou Home Equalizer

1 Answer

Pioneer djm 600

My pioneer djm 600 is only producing about qurter of the sound it usually does and the levels leds are not working at all. i had a party a few nights ago where they were working fine but were outside in the cold for about 6 hours.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 515 Answers

There is a master gain volume control on the rear of the mixer, where you connect everything. Make sure it's not down.

If it's fine, then maybe them being outside caused an issue. How cold is cold? If your talking freezing, then maybe there is some issues with the solder on the pc boards. You'll have to take it to a service center at this point.

I would say, try connecting a CD player to all the channels, and try from there. If it's still the same, then you need professional help.

- OPTiC
DJ Equipment Repair & Service
A DJ Pro Audio Co.

Posted on Dec 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pioneer DJM 600 Master Out 2 Left Side Doesnt Work. any help please?


it could be a few problems,

1 - the left master connection to the board has come away (you would have to open up the mixer to detect this.)


2 - the master fader is faulty (you can tell this by checking your master level indicators are both on whilst music is playing, or tapping the fader.)

My advice would be to have it serviced or if under warranty speak to the store you bought it from. But if you feel confident and know what your doing u can find replacement parts on ebay etc.


Hope this helps a little

Jul 17, 2012 | Pioneer DJM-600 Silver Professional DJ...

1 Answer

When moving the bottom knob on channel 1 and 2 of the pioneer djm 600 mixer there is a slight interference sound coming through the speakers. Channel 3 and 4 are fine


That sounds like you could have some dust built-up on your sliders. Get yourself some dust repellant spray or silicone spray normally found at you nearest computer store. That will definately sort your problem

May 21, 2010 | Pioneer DJM-600 Silver Professional DJ...

1 Answer

PIONEER DJM 600 . NO POWER.


I have the same problem, One day I open the djm-600 for replace the jack whole (easy), then of this when i close the mixer my pioneer died, but when I push the power button I can listen a little sound like ¿voltage running? Please Help !!!

Thanks

pd: sorry for my bad english

Nov 17, 2008 | Pioneer DJM-600 Silver Professional DJ...

1 Answer

Djm 600 - fader panel not working


i would recommend checking a fuse somthing with such good quality would less liky need a replace ment unless the power cut really damaged it internily

Oct 06, 2008 | Pioneer DJM-600 Silver Professional DJ...

1 Answer

Pioneer DJM-600 black Professional DJ power on but not working!! i check bouth the fuses and are working i can see that is power in te mixer but no answer with any signal of leds or music signal


So you get power to the unit, but no sound coming out? How about through the headphones, do you get sound coming out of the headphones?

Are all the volumes and gains raised up? All the eq's are up? Check the back of the mixer, there is a master gain volume - where the connections are - make sure this is up also.

If nothing, then you'll need professional help at this point.

- OPTiC
DJ Equipment Repair & Service
A DJ Pro Audio Co.

Sep 23, 2008 | Pioneer DJM-600 Silver Professional DJ...

1 Answer

Djm 600


start with connections and try to clean fader with lubricant contact cleaner from radio shack or any electronics store.

Sep 10, 2008 | Pioneer DJM-600 Silver Professional DJ...

1 Answer

Pionner efx 500


send out from mixer---------to pioneer in---------from pioneer out-----to return in mixer.

May 16, 2008 | Pioneer DJM-600 Silver Professional DJ...

Not finding what you are looking for?
Equalizers & Crossovers Logo

393 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Equalizers & Crossovers Experts

Brad Brown

Level 3 Expert

13530 Answers

Gregg Errera
Gregg Errera

Level 1 Expert

42 Answers

Audio Service Clinic...

Level 3 Expert

924 Answers

Are you a Pioneer Equalizer and Crossover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...