Question about Sony DCR-DVD608E DVD Camcorder

1 Answer

Not able to capture videos using Motion Picture Browser

I'm not able to import mediafiles from the camcorder or from the dvd drive of my pc using the motion picture browser. i can import all snapshots from the memory stick. how can i solve this?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sony Master
  • 2,794 Answers

Pinncale Studio will work. It will read your camcorder the minute it is plugged in and the power is turned on to it.

Posted on Oct 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers Handycam DCR TRV22e


The USB streaming driver for the Camcorder is not available for Windows Vista OS from Sony at this point. Hence it is not possible to transfer videos using USB interface. You may use i.LINK or A/V interface to transfer videos from the Camcorder to the Computer which is running on Windows Vista Operating System.



Please follow the steps to transfer video to a computer using an i.LINK connection (IEEE 1394).



IMPORTANT: Video capture software and a compatible video capture card must be installed on the computer. Depending on the computer manufacturer, various video capture cards and software (Adobe Premiere, Roxio Video Wave, Microsoft Windows Movie Maker, etc.) may be available or already installed on your computer. If necessary, contact the manufacturer of your computer for further information.




NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgate Plus software for video capturing. Some VAIO computers also include Click To DVD software that will allow video capture to the computer hard drive or directly to a DVD.

  1. Connect an i.LINK cable (also known as IEEE 1394) to the i.LINK port on the digital camcorder.

  2. i.LINK Cable.
  3. clip_image001.jpg


    i.LINK port.


    clip_image002.jpg

    1. Connect the other end of the i.LINK cable to the computer.

    NOTE: The computer i.LINK ports and capture cards may have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINK ports with 4 pins. If your computer only has a 6-pin i.LINK port, then it will be necessary to use a 4-pin to 6-pin i.LINK cable.

    1. Turn on the digital camcorder by moving the POWER switch to the VTR position.
    2. Cue the camcorder tape to the beginning of the video footage.
    3. Turn on the computer.
    4. Start the video capture software on the computer.
    5. Begin playing the recorded video in the camcorder.
    6. Begin importing the video with the capture software.

    It should now be possible to copy the video using the video capture software if the computer hardware and software are configured correctly.

Jun 23, 2012 | Sony Handycam DCR-TRV22E Mini DV Digital...

1 Answer

How install with windows 7


The USB streaming driver for the Camcorder is not available for Windows 7 OS from Sony at this point. Hence it is not possible to transfer videos using USB interface. You may use i.LINK or A/V interface to transfer videos from the Camcorder to the Computer which is running on Windows 7 Operating System.


Please follow the steps to transfer video to a computer using an i.LINK connection (IEEE 1394).


IMPORTANT: Video capture software and a compatible video capture card must be installed on the computer. Depending on the computer manufacturer, various video capture cards and software (Adobe Premiere, Roxio Video Wave, Microsoft Windows Movie Maker, etc.) may be available or already installed on your computer. If necessary, contact the manufacturer of your computer for further information.

NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgate Plus software for video capturing. Some VAIO computers also include Click To DVD software that will allow video capture to the computer hard drive or directly to a DVD.

  1. Connect an i.LINK cable (also known as IEEE 1394) to the i.LINK port on the digital camcorder.


i.LINK Cable.

1_8_2012_11_50_04_pm.jpg

i.LINK port.

1_8_2012_11_49_45_pm.jpg



  1. Connect the other end of the i.LINK cable to the computer.

NOTE: The computer i.LINK ports and capture cards may have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINK ports with 4 pins. If your computer only has a 6-pin i.LINK port, then it will be necessary to use a 4-pin to 6-pin i.LINK cable.

  1. Turn on the digital camcorder by moving the POWER switch to the VTR position.
  2. Cue the camcorder tape to the beginning of the video footage.
  3. Turn on the computer.
  4. Start the video capture software on the computer.
  5. Begin playing the recorded video in the camcorder.
  6. Begin importing the video with the capture software.

It should now be possible to copy the video using the video capture software if the computer hardware and software are configured correctly.

Jan 08, 2012 | Sony DCR-TRV285E Digital-8 Digital...

1 Answer

I NEED DRIVER OF HANDY CAM SONY TRV265E


The USB streaming driver for the Camcorder is not available for Windows 7 OS from Sony at this point. Hence it is not possible to transfer videos using USB interface. You may use i.LINK or A/V interface to transfer videos from the Camcorder to the Computer which is running on Windows 7 Operating System.


Please follow the steps to transfer video to a computer using an i.LINK connection (IEEE 1394).


IMPORTANT: Video capture software and a compatible video capture card must be installed on the computer. Depending on the computer manufacturer, various video capture cards and software (Adobe Premiere, Roxio Video Wave, Microsoft Windows Movie Maker, etc.) may be available or already installed on your computer. If necessary, contact the manufacturer of your computer for further information.

NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgate Plus software for video capturing. Some VAIO computers also include Click To DVD software that will allow video capture to the computer hard drive or directly to a DVD.

  1. Connect an i.LINK cable (also known as IEEE 1394) to the i.LINK port on the digital camcorder.


  1. Connect the other end of the i.LINK cable to the computer.

NOTE: The computer i.LINK ports and capture cards may have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINK ports with 4 pins. If your computer only has a 6-pin i.LINK port, then it will be necessary to use a 4-pin to 6-pin i.LINK cable.

  1. Turn on the digital camcorder by moving the POWER switch to the VTR position.
  2. Cue the camcorder tape to the beginning of the video footage.
  3. Turn on the computer.
  4. Start the video capture software on the computer.
  5. Begin playing the recorded video in the camcorder.
  6. Begin importing the video with the capture software.

It should now be possible to copy the video using the video capture software if the computer hardware and software are configured correctly.



i.LINK Cable.


1_1_2012_10_42_23_pm.jpgi.LINK port.
1_1_2012_10_42_43_pm.jpg

Jan 01, 2012 | Sony Handycam DCR-TRV265E Digital...

1 Answer

DRIVER WIN 7


The USB streaming driver for the Camcorder is not available for Windows 7 OS from Sony at this point. Hence it is not possible to transfer videos using USB interface. You may use i.LINK or A/V interface to transfer videos from the Camcorder to the Computer which is running on Windows 7 Operating System.


Please follow the steps to transfer video to a computer using an i.LINK connection (IEEE 1394).


IMPORTANT: Video capture software and a compatible video capture card must be installed on the computer. Depending on the computer manufacturer, various video capture cards and software (Adobe Premiere, Roxio Video Wave, Microsoft Windows Movie Maker, etc.) may be available or already installed on your computer. If necessary, contact the manufacturer of your computer for further information.

NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgate Plus software for video capturing. Some VAIO computers also include Click To DVD software that will allow video capture to the computer hard drive or directly to a DVD.

  1. Connect an i.LINK cable (also known as IEEE 1394) to the i.LINK port on the digital camcorder.


  1. Connect the other end of the i.LINK cable to the computer.

NOTE: The computer i.LINK ports and capture cards may have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINK ports with 4 pins. If your computer only has a 6-pin i.LINK port, then it will be necessary to use a 4-pin to 6-pin i.LINK cable.

  1. Turn on the digital camcorder by moving the POWER switch to the VTR position.
  2. Cue the camcorder tape to the beginning of the video footage.
  3. Turn on the computer.
  4. Start the video capture software on the computer.
  5. Begin playing the recorded video in the camcorder.
  6. Begin importing the video with the capture software.

It should now be possible to copy the video using the video capture software if the computer hardware and software are configured correctly.



Jan 01, 2012 | Sony Handycam DCR-TRV265E Digital...

1 Answer

I have windows 7 and Picture Package program for my camera Handycam is`nt compatible , so i want a solution


I'm sorry for the difficulties you're experiencing in transferring videos from the Camcorder to the Windows 7 Operating System. The USB streaming driver for the Camcorder is not available for Windows 7 OS from Sony at this point. Hence it is not possible to transfer videos using USB interface. You may use i.LINK or A/V interface to transfer videos from the Camcorder to the Computer which is running on Windows 7 Operating System.


Please follow the steps to transfer video to a computer using an i.LINK connection (IEEE 1394).


IMPORTANT: Video capture software and a compatible video capture card must be installed on the computer. Depending on the computer manufacturer, various video capture cards and software (Adobe Premiere, Roxio Video Wave, Microsoft Windows Movie Maker, etc.) may be available or already installed on your computer. If necessary, contact the manufacturer of your computer for further information.

NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgate Plus software for video capturing. Some VAIO computers also include Click To DVD software that will allow video capture to the computer hard drive or directly to a DVD.

  1. Connect an i.LINK cable (also known as IEEE 1394) to the i.LINK port on the digital camcorder.


i.LINK Cable.


shajanrs_143.jpg


i.LINK port.


shajanrs_144.jpg

  1. Connect the other end of the i.LINK cable to the computer.

NOTE: The computer i.LINK ports and capture cards may have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINK ports with 4 pins. If your computer only has a 6-pin i.LINK port, then it will be necessary to use a 4-pin to 6-pin i.LINK cable.

  1. Turn on the digital camcorder by moving the POWER switch to the VTR position.
  2. Cue the camcorder tape to the beginning of the video footage.
  3. Turn on the computer.
  4. Start the video capture software on the computer.
  5. Begin playing the recorded video in the camcorder.
  6. Begin importing the video with the capture software.

It should now be possible to copy the video using the video capture software if the computer hardware and software are configured correctly.



Thanks for understanding. Please let me know if you require any clarifications.

Jun 28, 2011 | Sony Handycam DCR-TRV265E Digital...

1 Answer

I should connect my Sony DCR-HC23E DV Digital Camcorder with a PC windows 7 ultimate USB port. I can't find drivers for compatibility


The USB streaming driver for the Camcorder is not available from Sony at this point. Hence it is not possible to transfer videos using USB interface. You may use i.LINK or A/V interface to transfer videos from the Camcorder to the Computer which is running on Windows 7 Operating System.


Please follow the steps to transfer video to a computer using an i.LINK connection (IEEE 1394).
IMPORTANT: Video capture software and a compatible video capture card must be installed on the computer. Depending on the computer manufacturer, various video capture cards and software (Adobe Premiere, Roxio Video Wave, Microsoft Windows Movie Maker, etc.) may be available or already installed on your computer. If necessary, contact the manufacturer of your computer for further information.
NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgate Plus software for video capturing. Some VAIO computers also include Click To DVD software that will allow video capture to the computer hard drive or directly to a DVD.

  1. Connect an i.LINK cable (also known as IEEE 1394) to the i.LINK port on the digital camcorder.

shajanrs_52.jpg

i.LINK Cable.



i.LINK port.

shajanrs_53.jpg

  1. Connect the other end of the i.LINK cable to the computer.

NOTE: The computer i.LINK ports and capture cards may have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINK ports with 4 pins. If your computer only has a 6-pin i.LINK port, then it will be necessary to use a 4-pin to 6-pin i.LINK cable.

  1. Turn on the digital camcorder by moving the POWER switch to the VTR position.
  2. Cue the camcorder tape to the beginning of the video footage.
  3. Turn on the computer.
  4. Start the video capture software on the computer.
  5. Begin playing the recorded video in the camcorder.
  6. Begin importing the video with the capture software.

It should now be possible to copy the video using the video capture software if the computer hardware and software are configured correctly.


Feb 26, 2011 | Sony DCR-HC23E DV Digital Camcorder

1 Answer

I NEED DRIVER SONY HANDYCAM DCR TRV22 WINDOWS 7


The USB streaming driver for the Camcorder is not available for Windows 7 OS from Sony at this point. Hence it is not possible to transfer videos using USB interface. You may use i.LINK or A/V interface to transfer videos from the Camcorder to the Computer which is running on Windows 7 Operating System.


Please follow the steps to transfer video to a computer using an i.LINK connection (IEEE 1394).


IMPORTANT: Video capture software and a compatible video capture card must be installed on the computer. Depending on the computer manufacturer, various video capture cards and software (Adobe Premiere, Roxio Video Wave, Microsoft Windows Movie Maker, etc.) may be available or already installed on your computer. If necessary, contact the manufacturer of your computer for further information.

NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgate Plus software for video capturing. Some VAIO computers also include Click To DVD software that will allow video capture to the computer hard drive or directly to a DVD.

  1. Connect an i.LINK cable (also known as IEEE 1394) to the i.LINK port on the digital camcorder.


i.LINK Cable.


shajanrs_37.jpg


i.LINK port.


shajanrs_38.jpg

  1. Connect the other end of the i.LINK cable to the computer.

NOTE: The computer i.LINK ports and capture cards may have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINK ports with 4 pins. If your computer only has a 6-pin i.LINK port, then it will be necessary to use a 4-pin to 6-pin i.LINK cable.

  1. Turn on the digital camcorder by moving the POWER switch to the VTR position.
  2. Cue the camcorder tape to the beginning of the video footage.
  3. Turn on the computer.
  4. Start the video capture software on the computer.
  5. Begin playing the recorded video in the camcorder.
  6. Begin importing the video with the capture software.

It should now be possible to copy the video using the video capture software if the computer hardware and software are configured correctly.



Feb 08, 2011 | Sony Video Cameras

1 Answer

My camcorder wont be seen by the usb connection to my windows 7 laptop?


The USB streaming driver for the Camcorder is not available for Windows 7 OS from Sony at this point. Hence it is not possible to transfer videos using USB interface. You may use i.LINK or A/V interface to transfer videos from the Camcorder to the Computer which is running on Windows 7 Operating System.


Please follow the steps to transfer video to a computer using an i.LINK connection (IEEE 1394).


IMPORTANT: Video capture software and a compatible video capture card must be installed on the computer. Depending on the computer manufacturer, various video capture cards and software (Adobe Premiere, Roxio Video Wave, Microsoft Windows Movie Maker, etc.) may be available or already installed on your computer. If necessary, contact the manufacturer of your computer for further information.

NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgate Plus software for video capturing. Some VAIO computers also include Click To DVD software that will allow video capture to the computer hard drive or directly to a DVD.

  1. Connect an i.LINK cable (also known as IEEE 1394) to the i.LINK port on the digital camcorder.

Connect the other end of the i.LINK cable to the computer.

NOTE: The computer i.LINK ports and capture cards may have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINK ports with 4 pins. If your computer only has a 6-pin i.LINK port, then it will be necessary to use a 4-pin to 6-pin i.LINK cable.

  1. Turn on the digital camcorder by moving the POWER switch to the VTR position.
  2. Cue the camcorder tape to the beginning of the video footage.
  3. Turn on the computer.
  4. Start the video capture software on the computer.
  5. Begin playing the recorded video in the camcorder.
  6. Begin importing the video with the capture software.

It should now be possible to copy the video using the video capture software if the computer hardware and software are configured correctly.





shajanrs_19.jpg

Jan 26, 2011 | Sony DCR-HC19E Mini DV Digital Camcorder

1 Answer

Hi! I have a Sony Handycam DCR HC23 and have just purchased a new PC with Windows 7 on it. There are compatibility issues so I was wondering if someone would know where to get a suitable driver for this...


The USB streaming driver for the Camcorder is not available from Sony at this point. Hence it is not possible to transfer videos using USB interface. You may use i.LINK or A/V interface to transfer videos from the Camcorder to the Computer which is running on Windows 7 Operating System.



Please follow the steps to transfer video to a computer using an i.LINK connection (IEEE 1394).
IMPORTANT: Video capture software and a compatible video capture card must be installed on the computer. Depending on the computer manufacturer, various video capture cards and software (Adobe Premiere, Roxio Video Wave, Microsoft Windows Movie Maker, etc.) may be available or already installed on your computer. If necessary, contact the manufacturer of your computer for further information.
NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgate Plus software for video capturing. Some VAIO computers also include Click To DVD software that will allow video capture to the computer hard drive or directly to a DVD.

  1. Connect an i.LINK cable (also known as IEEE 1394) to the i.LINK port on the digital camcorder.
shajanrs_52.jpg

i.LINK Cable.




i.LINK port.

shajanrs_53.jpg


  1. Connect the other end of the i.LINK cable to the computer.
NOTE: The computer i.LINK ports and capture cards may have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINK ports with 4 pins. If your computer only has a 6-pin i.LINK port, then it will be necessary to use a 4-pin to 6-pin i.LINK cable.

  1. Turn on the digital camcorder by moving the POWER switch to the VTR position.
  2. Cue the camcorder tape to the beginning of the video footage.
  3. Turn on the computer.
  4. Start the video capture software on the computer.
  5. Begin playing the recorded video in the camcorder.
  6. Begin importing the video with the capture software.
It should now be possible to copy the video using the video capture software if the computer hardware and software are configured correctly.

Jan 12, 2011 | Sony DCR-HC23E DV Digital Camcorder

1 Answer

Can you please tell me why when i try to import vidoes using picture motion browsing i am getting the message Cannot find source media for importing,


You might be connecting the Camcorder using USB interface. Picture Motion Browser Cannot be used for transferring videos from tape camcorder (mini DV in your case) using USB interface..

Operating System also matters..

If you're using XP OS, you can install the driver from supplied CD and use Windows Movie Maker to transfer the recordings using USB interface.

Vista, Windows 7 - You need to use i.LINK or A/V interface to transfer the recording. When using i.LINK with Vista, you can use the Picture Motion Browser software.

I think this will definitely help you to connect the Camcorder..

Dec 03, 2010 | Sony Handycam DCR-HC32 Mini DV Digital...

Not finding what you are looking for?
Sony DCR-DVD608E DVD Camcorder Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Cameras Experts

Larry Stiles
Larry Stiles

Level 2 Expert

286 Answers

kakima

Level 3 Expert

96576 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sony Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...