Question about Belkin (F5D7050) 802.11a/g/b Wireless Adapter

1 Answer

Wont connect ti internet

I have installed the drivers and connected to my bt home hub.
but i cant get on the internet.
when i check the windows wireless network icon it says no devices wireless devises detected, but belkin states it is connected to my home hub. i dont understand what i need to do to connect to the internet

Posted by on

  • Anonymous Oct 27, 2008

    can get it to work on windows vista

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Same device as mine. and im on home hub aswell. Uninstall the drivers. Restart windows. Reinstall the drivers. Hopefully this should make a differance. Also when reinstalling. make sure the device is not plugged in until you finish installing drivers. And maybe put it into another usb when you are ready to try again. this is something good to try on older systems. or OS's.

Posted on Jun 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Bt home hub (shuny black one) wont connect wirelessly


Try to disable the netgear interface and let windows manage the wifi card. This could also be happening if the signal is not strong enough where the machines are.
Is your wifi hub also a netgear? If not it may not be compatible with the cards if that is the case you will need to replace them with diffrent make of the cards preferably the same brand as hub.

Jul 27, 2009 | NetGear WG311T 802.11g/b (wg311tge)...

1 Answer

Just installed a D-Link DFE 530TX network adadpter into Dell Dimension 5000 desk top. Runnng Windows XP SP3. BT Home Hub 2.0 router. Even though broadband connection is fine to the router. The network...


Sounds like an IP address problem. Your IP address on both the NIC card (DFE 530) and the router have to be in the same address range. You can do this 2 ways. 1... Have your router hand out addresses automatically. Make sure DHCP is enabled and that you have at least one address available for it to give out. ie. 192.168.0.2 through 192.168.0.3. The first three number must be the same as the router. The other option is to manually set your IP address on your nic card to match the router. If the router is lets say 192.168.0.1 then you can assign 192.23.34.2 to your computer NIC. If you haven't been able to access your router then check your router manual to find out the default IP address and use the same number for your NIC changing only the last number. The largest number you can use is 255. Hope this helps.

Jul 12, 2009 | D-Link DFE-530TX+ Fast Ethernet PCI...

1 Answer

Belkin Wireless G desktop card & BTHome Hub


hi..
it has been seen that due to some reason the wep key doesnot work...
u can try changing the key type to WPA instead of WEP...
go to the router page and change the security type to WPA instead of WEP..
1 more thing in vista you can use the windows utility only...how come is it possible that you are using the card utility as well..i suggest you to disable the card utility and just use the windows default utility..
vedhick.....let me know if u need steps to change the security type to WPA..

Jan 26, 2009 | Belkin 802.11g Wireless Desktop Network...

1 Answer

Wireless G Desktop Card Connection to BTHome Wireless Router


uninstall the bt desk top help first then the bt wireless connection , if ur wireless card has an utility use it to configure . the connection might be due the conflict between the wireless software. checked if ur getting limited or no connectivty if so delte and recreate  the wireless profile, if ur using bt router like home hub or voyager go the router page with the ip for hub its 192.168.1.245 and navigate to advance and keep the wireless channel to 9 or 11  for voyager the its 193.168.1.1

Oct 21, 2008 | Belkin 802.11g Wireless Desktop Network...

2 Answers

Connects to home hub but not internet?


belkin adapter has a signal says its on but wont connect to the internet helpppp

Oct 02, 2008 | Belkin (F5D7050) 802.11a/g/b Wireless...

1 Answer

Can't connect to home hub


first, check if your networ adapter is installed properly by opening your device manager. if it is there and does not appear with any marks or splats like a question mark or exclamation point, you can close that window, check if wireless zero config (if you have WinXP) or wireless auto config (if you have WinVista) in Start> Run> Services.msc (XP) or Start>click on search field and type in Services.msc and right-click on that item and choose either Start OR Restart. close that window . (on WinXP) open network connections in control panel, right click on Wireless Network Connections>Properties>click on Wireless Connections tab, place check mark on Use Windows to Configure Wireless, click on OK, that will close that window. then right-click again on the Wireless Network Connection and choose View Available Wireless Network, your network should be there now. on vista, just simply look for the "two computer" icons in the system tray at the bottom right near the time, right-click on that and choose Connect to a Network, it should be able to find your network from there.

Aug 21, 2008 | Network & Wireless Adapters

1 Answer

Belkin N1 Wireless USB Adapter


Hi Emma,
Try these first:

change channels to 1-6-or 11. Make sure you change all of your wireless computers.

check is to make sure you are NOT using "IEEE 802.1x authentication for this network."

You can find at setting under "Wireless Network Connection Properties" and then under "Authentication" tab of your network properties.

This particular authentication method is periodically logging you off the network and re-authenticating.

Check the adapter in device manager to make sure that windows is not shutting the adapter down to save power.

Cordless phones1.gif and wireless ethernet cards use overlapping frequencies.As a test, you can unplug the AC cords from all the cordless phones in the area and see if it helps.
Please let me know how you make out.
thanks

Jan 21, 2008 | Belkin N1 Wireless USB 2.0 Network Adapter...

2 Answers

Internet conections


you will need either a usb 54MBPS or 108MBPS wireless adapter of any make that will connect to a usb port or a pci wireless card to fit in the pc tower on the motherboard.

Oct 06, 2007 | Linksys (WUSB54GCU) 802.11g/b Wireless...

Not finding what you are looking for?
Belkin (F5D7050) 802.11a/g/b Wireless Adapter Logo

308 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Network & Wireless Adapters Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

isaac johny
isaac johny

Level 3 Expert

796 Answers

Are you a Belkin Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...